Whenever after a start, I get the message that windows/system32/msiosd32.dll is not valid and should be checked with the Setup disk. But the installation CD is not

Similar Questions

• get a pop-up message "c:\windows\system32\ms32clod.dll is not a valid windows image.

  I get a pop up message "c:\windows\system32\ms32clod.dll is not a valid windows image" every time I start up windows XP.

  Can anyone suggest a solution please?
  Thank you
  Teabag123
  Hello
  • What were the changes made before the issue started?
  I suggest you return these methods:
  Method 1:
  I suggest you make a system full scan just to be sure.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Method 2:
  a. click Start, click run, type System32.
  b. enter OK
  c. find mcenspc.dll
  d. right-click on the file, then click on Remove.
  e. restart the computer.

• Error MESSAGE "C:\Windows\SYSTEM32\WindowsCodes.dll is not designed to run on Windows or it contains an error."

  C:\Windows\SYSTEM32\WindowsCodes.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system or software support provider administrator.

  How can I solve this problem
  Comments will be appretiated
  Guillaume Ramond

  Original title: error MESSAGE

  Hello William,.

  1. when exactly you receive this error message?

  2 did you do changes on the computer before the show?

  3. you are trying to install or run a program in this error message?

  This could be caused due to damaged DLL files.

  I suggest you to perform system File Check to fix the corrupted system files, and then check how it works.

  See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

  Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  Try this and respond with more information about you to provide the best solution.

• Error message "c:\windows\system32\atiumdag.dll is not designed to run on windows or it contains an error" appears randomly

  Original title:

  The title above guard poop upward on my screen, I don't know what to do about it. in the box it says also "c:\windows\system32\atiumdag.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation medi or contact your system admisistrator or the provider of software for support. .... BUT I do not understand what is the program and everything I try to repair by ATI shows nothing abnormal. HELPPPPPP!

  Hello Deborah,.

  I suggest you perform a System File Checker analyzes your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• I try to use the clean disk and after it starts I get a message that it has stopped working

  I try to use the clean disk and after it strats up, I get a message that it has stopped working

  Original title: clean work investor disc

  Please use this tutorial and try to do the cleaning disc again.

  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

• on startup, I get this msg that windows\system32\nvspcap64.dll has been missing.how to the difficulty?

  Windows\System32\Nvspcap64.dll happens every time that I reboot. How this can be repaired. Thanks ADotson

  Hi ADotson, follow the steps to solve your problem.

  Start > run > type msconfig > Startup tab

  A lot of startup items listed here. Expand the menu of commands .

  Check the location of your Windows\System32\Nvspcap64.dll

• error message; C:\Windows\System32/igfxres.dll

  Hi, I keep getting this error message c:\Windows/system32\igfxres.dll is not designed to run on windows or it contains an error.

  I am running windows vista Home premium. Can someone please help?

  The file belongs to your Intel video drivers. Install the latest version. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  MS - MVP - Elephant Boy computers - don't panic!

• When the BIOS on an IBM netvista starts you get a message that says "no operating system found"

  When the BIOS on an IBM netvista starts you get a message that says "no operating system found" press f1 to repeat boot sequence. but I need to change the boot sequence... Please help!

  Hello

  1. What is the operating system installed on your computer?

  2. don't you make changes to the computer before the show?

  Method 1:

  To change the boot order you must restart the computer and before you get the IBM logo on the screen start to type the F10 key to get the boot sequence menu.

  If you are not able to change the boot order by pressing the F10 key, please see the user manual to change the boot order.

  Method 2:

  Please see the links below.

  "Operating system not found" or "Missing operating system" error message when you start your Windows XP-based computer

  http://support.Microsoft.com/kb/321626

  No operating system is found when a Windows Vista-based computer is started, even if the computer worked correctly for a while

  http://support.Microsoft.com/kb/932932

• After runnung ipcomfig, I get a message that the media is disconnected, how fo I fix this?

  lost ip address

  After runnung ipcomfig, I get a message that the media is disconnected, how fo I fix this

  Hi sarahlane,.

  1. Why did you run ipconfig?

  2. what type of connection you are using? Is it wireless or wired?

  3. are you able to access the internet?

  In order to diagnose the problem, please provide us with the ipconfig log file.

  To do this, type the command in the command prompt:

  ipconfig/all > ipconfig.txt

  It will be saved in the directory where you typed the command.

• whenever I try to go into my control panel or computer I get a message that windows Explorer has stopped working and she said then it restarts, but I can access my computer

  Help!

  Whenever I'm trying to go in my computer or control panel, I get a message that windows Explorer has stopped working.  He then says that we find a solution, and the message disappears.  I can't yet get into my files computer or control panel.

  Whenever I'm trying to go in my computer or control panel, I get a message that windows Explorer has stopped working.  He then says that we find a solution, and the message disappears.  I can't yet get into my files computer or control panel.

  Why you are posting in the forum, IE?  Maybe the reason why you try to use the CP is to enter Internet Options?  If so, you can do it without the help of Windows Explorer (at least on your operating system) starting (using the Task Manager if necessary): control.exe inetcpl.cpl

  Otherwise what your problem probably means is that you have added something new to the root of the control panel which is not compatible with your OS, causing thus the Windows Explorer (not IE) crashing.  In this case, the same way you could get in Add Remove programs without involving Windows Explorer by starting: control.exe appwiz.cpl

  You can get help more informed by post on a forum that specializes in performance and Maintenance of your operating system.

  Good luck

  Robert Aldwinckle
  ---

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• Performance issues in XP after removing the Trojan horse, now get "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  If I bought a used computer, no matter who previously owned, the first thing I have with it would be to reinstall the operating system itself. You know not how the computer has been maintained, which has been incorrectly installed, what is missed, what virus and spyware, there may be, etc. I would not live with someone of another errors and problems, possibility of kiddy p0rn, etc, and I would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you reinstall Windows properly.

• Get the following message.c:\windows\system32\ddrawex.dll isn't is either not designed to run on windows or it contains an error

  My screen to count keeps blinking and I get the above message. I'm trying to update my activex announcement of directx, but nothing works. The activex was told that it was not recommended for my computer. What can I do? I was told to try to install the program again, but I don't know the original installation media. I don't know what to do and the flashing makes me crazy. Thanks, Chris150

  * original title - continues to Flash the screen of my computer and I get the following message.c:\windows\system32\ddrawex.dll is either not designed to run on windows or it contains an error. Try to install the prgram using the original installation media. *

  My screen to count keeps blinking and I get the above message. I'm trying to update my activex announcement of directx, but nothing works. The activex was told that it was not recommended for my computer. What can I do? I was told to try to install the program again, but I don't know the original installation media. I don't know what to do and the flashing makes me crazy. Thanks, Chris150

  Hey chris150

  on the link below, there are a few different methods to try to see one that works for your problem

  see if one of them will help you

  http://pcsupport.about.com/od/findbyerrormessage/a/ddrawes-DLL-not-found-missing-error.htm

  Walter, the time zone traveller

• I have the product key on the back of my computer toshiba laptop but still get a message that windows 7 is not genuine, what can I do?

  My son bought this laptop Toshiba Satellite with windows 7 ultimate and gave our grandchildren for Christmas two years ago. They never used so it brought and I got from my son. On startup, I get a message that windows is not genuine. I've repeatedly tried to activate with the product key on the label of MS on the back of the computer laptop, but message still there. I noticed the first time I tried to enter the product key, there was a different product key in the input fields. I have entered the correct product key but message still there.
  Can someone please help?  Thank you for your time.

  Hello

  I would say allowing you to run the Microsoft Genuine Diagnostics tool then copy and paste the results into an answer here for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Also I suggest you to check your product key and report to Microsoft about the issue.

  Check out the following link to report to Microsoft.

  https://www.Microsoft.com/en-us/howtotell/CFR/report.aspx

• I can't in windows at all and a bad picture slui.exe message comes up saying that c:\windows\system32\rpcrtremot.dll is not designed to run on Windows. What is the devil?

  Computer went bad after several problems, but after that I tried to do a restore, went up the wrong at worst... start, computer can not go beyond error message saying Windows\system32\RpcRtRemote.dll... What is with all these DLLs in endangered or get damaged.

  Hi Hurigeorge,

  ·         You're able to boot in safe mode?

  ·         Since when are you facing this problem?

  ·         You did it last changes before the show?

  Method 1:

  Step 1: I suggest to start in safe mode, please see the articles below:

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope that helps!