Whenever I have disconnect and reconnect a USB scanner renamed it to scan #2

Similar Questions

• Laptop goes into a spasm of disconnect and reconnect a USB 3.0 drive

  Original title - USB 3.0 unplug plug back

  I have 2 computers running Windows 8 Pro 64-bit. 2 computers have the same USB Microsoft drivers, the same set of Intel chips (both with the i7 processors) from the same manufacturer of motherboard. They have the same operating system, same programs, clean installs with drivers to date and windows updates, they're practically twins with the exception of a material fact; one is one laptop, the other a desktop computer.

  Two computers, although very similar in there profiles of hardware (Device Manager) and in contexts there, seem to have their preferences on what USB 3.0 devices that they like or dislike.

  The laptop will go into a spasm of disconnect and reconnect a USB 3.0 drive, whenever I plug. The office like this player and everything will work day and night. However, when I plug in a USB 3.0 flash drive in desktop and start transferring a file, it disconnects and reconnects the reader, which damages the transfer. The laptop like this USB 3.0 flash drive and will transfer files to and from this day and night.

  Of Corse it's backup and data transfer between 2 computers, although they are very similar, very difficult. Devices USB 3.0 a computer like the other goes into a conniption fit with.

  I tried everything I can think of. Updated, updates to the BIOS, software configurations, reader driver manager settings, different formats of devices, software of turbo boost, installs own, you name it. It is important to note that none of the problems happen with any of my USB 2.0 devices.

  Are there not a universal standard of USB 3.0? 2 computers act as if they have 2 different USB 3.0 standards! And each device will work with a standard computers. Is there a laptop computer and a standard desktop computer? LOL, it's nuts!

  SOLVED *.

  I solved the problem.

  Just ignore my other messages troubleshooting efforts earlier.

  The problem is with the Microsoft Windows 8 driver for:

  "Intel (R) USB 3.0 eXtensible Host Controller - 0100 (Microsoft).

  The Microsoft Driver is dysfunctional , and there is no other driver available!

  I have disabled> Intel xHCI in BIOS on all my computers to get a partial solution to this problem of Microsoft .

  With XHCI disabled in BIOS driver Microsoft dose does not and so I can use USB 3.0 with controller Intel devices (although they are paralyzed, at least they work now).

  As a big bonus:

  My PC has 2 not intel USB 3.0 controllers!

  With Intel xHCI disabled in BIOS and no Microsoft Driver to mess things up that my 2 other controllers can now go full speed USB 3.0 there little made in China drivers! Windows8 should get fixed soon!

• Internet connection no longer works unless I have disconnect and reconnect the wifi regularly

  I find that after a time random, maybe twenty minutes a half an hour or so, my internet connection breaks down and it can only be fixed by disconnecting and reconnecting to my wifi network.

  It is a problem on my iMac of retina 2014 running El Capitan and 2011 MacBook Air my wife running Mountain Lion (but not on my MacBook Air of 2011 which takes place in Yosemite).

  It does not seem to be triggered by almost anything, but it's maddening to have to do all the time. It's a router NetGear btw, less than a year.

  If anyone has a solution I'd love to hear it!

  Greetings, peederjigson!

  Welcome to the communities of Apple Support! It seems you have some problems to stay connected to the Wi - Fi on some of your devices. This is not how it is supposed to work so I'll be happy to help you.

  Use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - even with a new router, the firmware may need to be updated. But this article can go a long way to point out where it is.

  The potential of Wi-Fi and Bluetooth interference sources - because this is not the case with all your devices, it could be other things blocking the signal. Here are a few potential sources.

  Recommended settings for the WiFi routers and access points - because your router is "-ish" make sure that the settings are correct.

  Have a great day!

• The mouse disconnects and reconnects randomly.

  I am running Vista 64 bit and am currently using a Razer Krait mouse. Only randomly, the mouse disconnects and reconnects for about two seconds every 10 minutes. It has nothing to do with the mouse, because I tried it on my friends computer and it has worked. The time that it happens mostly when I'm in a computer game. I really need help, I searched other forums and I could not find the answer. * It is not a wireless mouse *.

  No, I have not all usb 2.0 ports. I eventually found a new mouse and its fine. I guess it's just the mouse and that it should be replaced. Thanks for all your help.

• Smartphones blackBerry with curve 9320 problem: I need to disconnect and reconnect to receive mails and browse

  Hello

  I have the following problem with my BB Curve 9320: several times per day email stop and I can't use the Internet (while telephone calls normally).

  Whenever this happens I have to disconnect and reconnect to the network. As soon as I reconnect to the network again starts the flow of electronic mail and Internet is available.

  I contacted my mobile operator (wind, Italy) and told me that it is not for lack of wind, but a technical problem of the phone.

  Thanks in advance for your support.

  Marco

  Hi, KIDA,.

  Try one of the following - option

  1. when your device is turned on, remove the battery for a minute and then reinsert the battery. This do a reboot your device that addresses minor issues with the BlackBerry.

  2. KB17877 how to start a smartphone BlackBerry in Mode safe

  3. have a backup of your device data and then have a security wipe. Options > Security > Security Wipe. Enter "blackberry" without the quotes. This will delete all your data from the device.

  4. consider the update/reinstall the OS device.

• WiFi disconnect and reconnect using

  I'm using the lenovo laptop, win 7 x 64 ultimate, my ISP is PLDT, plan 1299 dsl + landline phone with wifi 1 MB/s... my internet connection is almost a year old, but my problem started recently, I don't know if the problem is in my laptop or connection internet but wrong just describe it...

  PROBLEM:
  whenever I surf the internet using my laptop connected to my wifi at home, I work well for 5-10 minutes and all of a sudden, it won't. whenever I click on something, as button links on the Web page or reload, the problem appears suddenly it disconnects and reconnect my wifi this is why I can't use internet effectively. the problem appears randomly and its such a pain. can not download, download and it stops same loading pages. her disconnect and reconnect only happen 2secs. but randomly as the interval 10-20 sec. My office is connected to the router even wifi using a cable, and it is not affected by the disconnection of the link that leads to me that the problem is on my laptop. but it works perfectly all of these days, I even play games online and work perfect but now, this problem occurs.
  I change all the settings here in my cell phone that happens all of a sudden, it all started when my office has been reformatted, but I think that its not relevant.
  other devices and laptop computers which connects to my wifi doesn't have ds problem.
  peuvent some please help.
  I've already checked the network devices if his driveers are outdated, but it says its updated. Here's some more info.

  PLDT chanel
  http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/4_zps1b9da489.jpg

  Device Manager
  http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/3_zps84e77a9c.jpg

  Dxdiag
  http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/2_zps09d0a3c9.jpg

  My computer properties
  http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/1_zps95f9eea0.jpg

  PLDT Info
  http://i1297.Photobucket.com/albums/ag35/Louis_Evangelista/5_zps90401ed2.jpg

  You can send me a mail or comment just so you can help me.
  E-mail address is removed from the privacy *.

  HERE IS THE VIDEO LINK
  http://www.YouTube.com/watch?v=2fc4741k3C0

  Hi Louis,.

  This problem can occur because of network settings, try the following methods and check if it helps.

   

  Method 1:

  Run the network troubleshooter, and check if that helps.

  Network troubleshooting

   

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Refer to the steps in the following Microsoft article.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  Keep us updated on the status of the issue.

• Zune and Windows 8 "error reading the Zune software cannot access important data on your Zune." Try to disconnect and reconnect it. If the problem persists, contact customer support. "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  Message error "the Zune software cannot access important data on your Zune.

• mount a drive without having disconnected and reconnected

  Is there a way to go back a disc that you have removed, without having it disconnected and reconnected in it?

  Thank you!

  The Finder, choose utilities go to menu, open disk utility, select it in the sidebar and press the mount.

  (140214)

• How can I stay connected to my internet? Whenever I have connection I reconnect to my internet

  Original title: internet access
  How can I stay connected to my internet?  Whenever I have connection I reconnect to my internet

  Hi oulimatou,

  Here's a beautiful walk through for troubleshooting network connection problems:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?SignedIn=1

  b Eddie

• When running Vista Home Premium 64-bit. I disconnected and reconnected to my work programmes often... where calls interrupted

  I had my internet provider here at least 10 times in the last 2 weeks. They see no problem.  I gave my computer to Microsoft, he ran and saw no problem.

  But I still have questions!  Even online game (poker), you can see where it disconnects and reconnects repeatedly.

  Can any help...?

  Hi LoriBob,

  1. is the part of the computer from the domain?
  2. when the last time programs worked well?
  3. What is the type of internet connection you use?
  4. only happens to the programs or even disconnected Web sites?

  If this only happens with online programs, it is possible that some third-party programs installed on the computer is behind internet connection dropped.

  I suggest that you do check and clean boot, if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If the problem persists then you need to update the network adapter drivers on the computer by visiting the network card manufacturer's Web site will download and install latest driver update.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CPU on HP p6130y will not respond unless I have unplug and reconnect.

  CPU will not respond unless I have unplug and reconnect.  The power light turns on but the screen remains black.  Monitor works.  Sometimes it will come around after a disconnect - reconnect.  This morning I had to unplug and reconnect six times before would respond to the computer.  HP model p6130y.  AMD Phenom 9750 Quad Core processor.  Windows Vista.

  23Scorpio wrote:

  Hi old_geekster and thanks for your reply.  I tried to find a site that has the power to my computer and I'm having no luck.  Same HP does not list that they carry the power supply for my p6130y.  You have no idea where I can get this?  Do you know how much it costs?  Thanks again.

  ___________________________________________________________________________________________

  23Scorpio, it's my pleasure.

  You should be able to use any standard ATX PSU in the computer.  I suggest to measure the current PSU and comparing measures that you choose.  I like Corsair and OCZ.  The PSU is the backbone of the computer, it is not the place to save money.  Both in the links I provided are good examples of what you can use.  Read the reviews to see what users have to say about them.

  If your problem is solved, please click "accept as a Solution.

• Welcome to chance, disconnect and reconnect itself

  Seems that I came across a weird problem. Randomly throughout the day our two guests are disconnect and reconnect. The period between disconnection and reconnection are about 1 to 2 seconds in length and interfere not actually with virtual machines. I can't understand why this is happening. We run ESXi 4.1.

  I have attached a few screenshots. Any help would be appreciated.

  Your statement in your quick editing above, I would say that your guests are not correctly configured in DNS.

  If you can only ping via IP to other machines and not using their host names FULL domain name, then you need to check that your hosts have appropriate entries and return in DNS.

• Internet keeps disconnect and reconnect every 3 minutes

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Internet keeps disconnect and reconnect every 3 minutes approximately. I changed the computer so its near the door (the router is in the room) but I never had this problem with my laptop.

  Hello

  1. which version of the Windows operating system is installed on the computer?

  2 did you a recent software or changes to the material on the computer?

  You can go through the steps mentioned in the link and the Coachman.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• LR on Win 10 5.7.1: whenever I have open and click Import, disable all the menus and I can now no longer. [A: Lightroom 5.7.1 installation does not work]

  I have a PC with Windows 10 on which I installed Lightroom. Whenever I have open and click Import, disable all the menus and I can no longer move forward. No command is active and I can only leave the program. Please help as soon as POSSIBLE. Thank you.

  -gA

  Hi gA,.

  Please reset the Lightroom preferences and check if that helps.

  Reference: How to set preferences for Lightroom

  In addition, you can create a new catalog and open Lightroom with that and check if it works.

  Kind regards

  Mohit

• Drive hard USB 3.0 keeps disconnect and reconnect

  Hello

  I recently bought Silicon Power Diamond D10 1 TB usb 3.0 and I have new laptop Acer Aspire 3830TG with Windows 7 and a usb 3.0 port blue. After pluging it in, driver will connect, but after while it disconnect and connect and so on. I tried to update driver, but he was no help.

  I have a 3.0 port and two 2.0.

  3.0 2.0 - no problem, speed 2.0 port hard drive

  2.0 hard drive Samsung Story Station 1 TB (his own adapter, because its 3.5 inch) in 3.0 hub - no problem, speed 2.0

  harddrive 2.0 2.0 speed - no problem, speed 2.0

  3.0 hard drive 3.0 speed - unstable connection

  More precisely

  Disk management - it shows me his assets and a primary, but it's refreshing as hard disk to restart. the icon will be displayed, but iso hidden when it will disconnect itself

  Device Manager - behavior is the same, it shows the hard disk even if the icon remains.

  This computer - icon will not remain in this view. Sometimes it's on during 2 minutes, but then it will start to disconnect and connect.

  USB 3.0 driver is Renesas Electronics USB 3.0 Host Controller with date 10.5.2012 and 2.1.36.0 version

  He works in collaboration with driver version 6.1.7600.16385(win7_rtm090713-1255)

  Internal hard drive Hitachi HTS547575A9E384 is executed with the same version that is located in the folder.

  C:\Windows\system32\Drivers\disk.sys

  C:\Windows\System32\drivers\partmgr.sys

  Motherboard is Acer JM30_HR chipset with intel Sandy Bridge and southbridge Intel HM65. BIOS is version Acer v1.08

  I said "powered usb hub.

  Updated firmware for the drive and updated the Bios for your Acer, which is not a driver update, an update of the chipset may have an impact on the usb aspect