whenever I try to run an update by using windows update my hard drive is not responding
This product whenever I try to run a big download such as upgrades of windows and other components of windows...
my computer will download installation ok, but when it starts to install it on my computer, it will be OK for about 10 to 20 seconds, then my hard drive starts clicking and stops responding.
and it will stay like this for about 20 or 30 minutes and it may or may not resume the installation.
Ive also seen it gives me a blue screen and immediately cut.
but I have no problem with small installs
is their an error on my computer somewhere?
I know that I did not cause of malware I double checked everything and I always scan with MBAM
and I have my computer set up through msconfig.exe to run on own boots only
Although if you want to give me a link to the hijack-this site can I run this tool and give you the hijack log
IM wondering if it is a windows vista problem, cause I have vista Home premium 64-bit sp 2, or if there is anything I can do
cause im seriously just get XP and see if he is not only a hard drive problem
Asron_H,
If you encounter a problem with Windows Installer, you can verify that you have the latest version. Go to this link to get the latest version. Install and then let us know the results. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Usb detects the dvd player and my external hard drive, but does not detect my hard drive. I tried to disconnect the external hard drive, but still, it does not detect my hard drive. The drive letter is E: and pen usb H: external drive letter is F: HELP!
When I try to send files to it in "send to" my hard drive does not appear
What hard drive, external or internal? Normally only removable devices appear in the mailing list.
You could use copy and paste instead, or see the following article...
http://support.Microsoft.com/kb/310270
.. how .to add items to send it to the list.
Tricky
-
pretty much my title says it all, I can not install anything, I get the same error, the only thing I can do is to get online. is there a way to restore my files online tracking, I have not my installation disc either. is there a way to remove viruses, malware, etc. online because everything I download and try to install I get the same error
Hello
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
also run the sfc/scannow command.
http://support.Microsoft.com/kb/929833
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions
If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation
read the below tutorial on how to perform a repair installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
-
I get this error message whenever I try to run the disc defragmentatio
I get this error message whenever I try to run disk defrag c:\documentsandsettings\user\localsettings\applicationdata\microsoft\internetexplorer\recovery\active\recoverystore
I really need to run defrag, but one can not because of that, I have looked everywhere but can't find and answer, please help it would be much appreciated
I guess that a malware is the cause of the problem.
Download this http://www.malwarebytes.org/
Update and Scan. If this does not it, use this
http://www.myantispyware.com/2009/10/28/how-to-remove-desktop-Defender-2010-uninstall-instructions/
-
Whenever I try to find new updates for my computer error 80248009 appears under Windows Updates. I have not installed new updates on my computer in a month because of this problem. How should I do so that I can update my computer?
Error when you try to use Microsoft Update or Windows Update Web sites to install updates: "0 x 80248009":
http://support.Microsoft.com/kb/956700Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?
Hi Kerrkid90,
Welcome to the Microsoft Answers Community Forum site!
To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game
2. run the setup.exe file
3. right-click on it and run as administrator.
If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:
http://support.Microsoft.com/kb/290301
In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:
http://forums.aeriagames.com/?f=6
I hope this helps!
Thank you best regards &,.
Calogero - Microsoft technical support.
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think -
When I try to run the update in widows I get the error number: 0x8024400A
When I try to run the update in widows I get the error number: 0x8024400A. I also tried to restart the automatic update service and BITS service with no luck. Any ideas? I am running Windows XP SP2 on a Dell Latitude. I lost a hard drive and just reinstalled today of a disc from Dell.
Thank you
Adam
http://support.Microsoft.com/kb/836941
Read the above article, you can use Fixit, but I suggest fix you it yourself by following the steps in the resolution.
-
I get an error message whenever I try to run Disk Defragmenter
original title: I get an error message whenever I try to run the Defragmenter of disckIt says disck Defragmenter is already programmed to run on volume C please run Chdsk/F I checcked my schedule the task and it does not appear as being planned how to fix this?
Disk Defragmenter may not work on a drive when it detects errors on the disk. If you need check your drive for errors. This is usually by running "chkdsk" even if a disk check can be scheduled graphically as well. Because the disk check must be performed when nothing else is using the drive, reboot and chkdsk runs before Windows loads on this disc. For more information:
"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >HTH,
JW -
Microsoft Fix It gives me an error "input string was not in a correct format" whenever I try to run it. Run Windows XP Home addition, version 2002, service pack 3.
Hey H West.
The forum below would be more suited for that matter.
Microsoft Fix it Center - NOT for general support questions
http://social.Microsoft.com/forums/en-us/fixitcenter/threadsKind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I try to run weindow update I have an error code 641 getting 80070641
I try to run the update weindow
I have an error getting 641
try to run more than once
make the same mistake
code 80070641
Hi peat stephen!
You are not alone!You can find the solution for this situation on this related thread:See you soon!Makoi -
I downloaded Nifskope, and whenever I try to run it it says I am missing QTCore4.dll
Original title: QTCore.dll help
So I downloaded Nifskope, and whenever I try to run it it says I am missing QTCore4.dll. A way to download from a secure site, or a fix that I can use? Not looking for the Sims, or whatever it is, the Skyrim modding.
Hello
I recommend you follow the steps in this link that talks about a similar problem with a possible fix.
THIRD PARTY LINK WARNING
WARNING: Microsoft provides no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer -
Whenever I try to download the updated version, it fails and cites the U44M1P2003 error code. Can we help.please
Robert123
Thanks a lot, this question comes with the release of Photoshop elements or Premiere Elements.
Please refer to the instructions in the links below, this should help solve the problem:
Error Code U44M1P2003 when updating of PS12.1?
12.1 error installation update | Photoshop Elements, first Elements
Let us know if that helps.
Kind regards
Bani
-
Whenever I try to install and update creative cloud, he's going to halfway and stop the download says "Setup could not access the critical file (error code46).
Hello
Please refer to the instructions mentioned in the link below, it should help:
Cannot install Creative cloud installation - error code 46
"Setup could not access a critical file. Please try to reinstall. (error code: 46) »
Let us know if this was helpful.
Kind regards
Bani
-
I have a MacBook Air, the BONES of yosemite, the Photoshop 12.0. Adobe Updater tells me that I have an update available (12.0.4). Whenever I try to download the update, I get the error message: "there was an error downloading this update. Quit and try again later. "I tried several times without success. What can I do to install the update? Thank you!
Help > Update function no longer works. You will need to go to updates and download updates for your version and Psalm
I'll help you get started with the CS5 update. Adobe - Photoshop: for Macintosh: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5
Gene
-
I'm getting 1602 error message whenever I try to download the update to Adobe Reader on Windows 8
< br >
< span style = "" are-size: 10pt; ' > I'm getting 1602 error message whenever I try to download the update to Adobe Reader on Windows 8, what do I do? " </span >
< span style = "" are-size: 10pt; "> < / span >"
[removed email address]
Please see the below KB Doc: http://helpx.adobe.com/acrobat/kb/error-1602-update-acrobat-reader.html
Or download the update manually from the link below and install their...
http://www.Adobe.com/support/downloads/product.jsp?platform=Windows&product=10
Maybe you are looking for
-
How to detect negative exceedances in pow()?
Hello CVI the pow() function does not set the errno variable to indicate that an overflow condition has occurred - is this by design, is there a work around? (I would have assumed the value ERANGE errno). Thank you!
-
my model of dell's vostro 3450. I want to play nfs rivals. but I can't do that. because I need a graphics card latest updated driver to play this game. should what version of the graphics driver I install to support this game.
-
make default selection "All" for SelectManyCheckbox component
I have try this:int [] stateIndex;DCIteratorBinding dcMasterDetail = (DCIteratorBinding) evaluteEL ("#{bindings.") LogTypesVO1Iterator}");ViewObject voM = dcMasterDetail.getViewObject ();rowCount int = (int) voM.getEstimatedRowCount ();stateIndex = n
-
Limit Notification Mailer applications to SSHRC only
Hi allI have requirment activate mailer of notification (that users receive emails for their notifications) for SSHRC (free HR) applications only. Not all of the other modules like the default sender.will someone guide me how to do it pleaseThank you
-
Muse of VERY slow edition!
I have had trouble with the Muse over the last week or so and now publishes at glacial speed. I am in the mist of the creation of a site and try to publish a test. He did several times and takes only a few minutes. Now for more than 30 minutes and al