Where can I fiond documentation of these options for the tool? (Sorry I'm even not name these buttons :-())

Similar Questions

• Where can I find documentation on how to get the VCS - C and VCS-E to Exchange presence information

  I turned presence on my VCS - C and VCS-E, but depending on whether I am VPNed or not, I don't see the State of the presence of my side of the firewall.

  I checked for x7.1 Administrator's guide, I looked in the guide of authentication devices, and I'm at a bit of a loss.

  Is what I'm trying to do as possible, and if so, what do I have to do to make this work?

  I have a pretty simple setup - that works very well, could give you some ideas;

  Two VCS - Independent C (soon to be clustered) and a VCS-E;

  all internal clients of the JabberVideo register with a VCS - C, and when external registers with the VCS-E (all of my users of Singapore recorded with the VCS-E).

  Authentication is directly with AD and is made on the a WHAT VCS - C regardless of the user is registered with the VCS - C or the VCS-E.

  PUA and presence disabled on VCS-E and activated on the VCS - C, which is used as SIP registrar.

  Authentication on VCS - e:

  Default subfield "do not check".

  Default zone "do not check".

  Traversal server box "do not check".

  Authentication on VCS - C:

  Default subfield "audit powers.

  MOVI area 'audit powers.

  Point final SIP registration box "treat as authenticated.

  Course customer area 'audit powers.

  Authentication works well, the users cannot sign up for the VCS-E with the wrong password or user name, and presence works well too - both inside and outside.

  /Jens

• Where can I safely download a USER manual for the second hand Compaq nc 4400 I just bought?

  Can someone tell me where I can download a MANUAL for my Compaq nc4400 I just bought second hand safely. (Used)

  I'm afraid to use a non-secure site!  Also can someone tell me what times of loading, I would expect to see on the screen to a fully charged battery? This one is only show 30 minutes! Guess it must be replaced on the right? ;-) Please advise me on the best type of battery for my model. Thanks, Bart.

  Hi Bart1,

  You can download the manuals of the secure HP web support portal for your laptop in the manuals section.

  Since you bought it second hand and it provides only 30 minutes and then it's a good idea to replace the battery with a new standard or higher capacity. There is no need to buy an OEM HP part. Try to find one that has more than the standard 4400mah.

• Where can I find documentation for message filter

  Where can I find documentation on how to create message filters for * all * things that can be tested? The only use of examples of body, or object. I need to be able to test the Content-Transfer-Encoding.

  Almost all emails that I receive that are coded in base64 stuff is spam. How can I filter on:

  Content-Transfer-Encoding: base64
  Content-Disposition: attachment; filename = "proposal.pdf"

  JVBERi0xLjMNJeLjz9MNCjkgMCBvYmoNPDwvTGluZWFyaXplZCAxL0wgNjk4Ni9PIDExL0UgMzA1
  Ni9OIDEvVCA2NjkyL0ggWyA0NDggMTQ2XT4 + DWVuZG9iag0gICAgICAgICAgICAgICAgICAgICAg
  ...

  I tried selecting "Content-Transfer-Encoding" with the value "base64" but it does not work.

  I just tried:
  Content-Transfer-Encoding contains city-printable
  This only 2 items returned, which is much less than the expected result.

  added
  Body contains city-print
  and modified to match one of the following
  This value returned as many, but not all.

  based on these findings:
  Content-Transfer-Encoding contains base64
  I think that would test the first copy of this header, rather than those in the various sections MIME.

  Body contains Content-Transfer-Encoding: base64 would capture more.

  However, I use Thunderbird to capture junk spam control settings, so are not really the issue that you want to filter. Have you set up and trained your filter auto junk removal of these emails to junk.
  http://KB.mozillazine.org/Junk_Mail_Controls

• Where can I find documentation users manual or product for the HP 2311xi monitor?

  Where can I find documentation users manual or product for the HP 2311xi monitor?

  The only documentation that I could find was the specifications for the HP 2311xi IPS LED backlit LCD monitor. I hope this helps.

• Hello. Where can I get documentation for HP Capture and the road? As a user/administrator's guide?

  Hello. Where can I get documentation for HP Capture and the road? As a user/administrator's guide? I recently installed a trial version, but he did not come all documentation.

  little late? ;-)

  Seems many is research. Look at

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportManual&lang=en&cc=us&docIndexId=64179&TaskID=135&prodTypeId=457757&prodSeriesId=5260445

• How can I get all the options for the creation of new titles? I'm stuck on a Board where it does not color or width/size options

  How can I get all the options for the creation of new titles? I'm stuck on a Board where it does not color or width/size options

  If you have not all panels in the Titler then go and reset the current workspace that is located under the window.

• Where can I go to get a recovery for my computer disk laptop gateway

  Where can I go to get a recovery for my computer disk laptop gateway

  http://support.gateway.com/support/default.aspx

  Contact Support for gateway at the link above.

  And read this about the Vista of the gateway recovery process:

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  General information on this topic:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Where can I get a map of lightning for my Apple pencil reload the tool?

  Where can I get a map of lightning for my Apple pencil reload the tool?

  It is packed with the pencil of Apple.

  If you lose it, there is currently no way to buy a replacement because they are not sold on their own. You must contact the Apple Support and inquire about a replacement or load the pencil by plugging in the port of lightning of the iPad.

  Use the pencil to Apple with iPad Pro - Apple Support

  You can also purchase third party for pencil Chargers:

  http://www.IMore.com/Apple-pencil-accessories

• iPhone Sync with PCI trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  I am trying to sync my iphone to my computer via i-tunes soft ware.  It does give me an option for the phone device. How can I get the phone icon in the menu bar?

  Mac or Windows?

• Where can I download a LabVIEW GPIB driver for an ANDO AQ6315E optical spectrum analyzer?

  Where can I download a LabVIEW GPIB driver for an ANDO AQ6315E optical spectrum analyzer?

  Thank you.

  The Instrument Driver Network has all the drivers for the instruments. There is no driver specific to this model, but there is one for the 6310 B. Maybe this can work for you. You may need to change. If this isn't the case, you will need to write one yourself. You can get a lot of material for this here: http://www.ni.com/devzone/idnet/development.htm

• where can I download Lexmark Z617 printer driver for win7

  where can I download Lexmark Z617 printer driver for win7

  my email is * address email is removed from the privacy *.
  Thank you

  Lexmark web site.  If they do not have the drivers you need anyone else won't do.

• Where can I find dirver 3D DirectX 8 for XP Home Edition?

  Where can I find dirver 3D DirectX 8 for XP Home Edition? for the game.  Online searchers were unsuccessful.

  Hi andrewjc2005,

  ·         This number encounter you in playing games?

  ·         Which version of DirectX you have installed on your computer?

  You can download and install DirectX from this link and check if it helps.

  http://www.Microsoft.com/downloads/en/resultsForCategory.aspx?displaylang=en&CategoryID=2

  Also, keep the computer up to date by installing all the updates that are available.

  For more information, see: How to keep your Windows up-to-date

  Hope the helps of information.

  Please post back and we do know.

• Where can I find that Microsoft signed drivers for Windows 7?

  Hello. Where can I find that Microsoft signed drivers for Windows 7?

  Can be a little more specific please, what driver do you need?

  Drivers are usually better obtained from the website of the manufacturer of the specific device.

  For more information, see - http://windows.microsoft.com/en-us/windows-vista/what-is-a-signed-driver (for Vista but fundamentally similar).

  and - http://windows.microsoft.com/en-us/windows/what-is-driver#1TC=windows-7

  See also - http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/how-to-attain-signed-drivers-from-windows-update/a9458e79-685e-4fe3-b0f4-9e9f83f99225 concerning a request for similar sounding.

• How can I add "Shut down" as an option for the action of the Power button if it is not available

  How can I add "Shut down" as an option for the action of the Power button if it is not available.

  Hello

  Welcome to the Microsoft Community and thanks for posting the question. Looks like you want to add shut down as an option for the power button.

  Visit this link and try the steps mentioned:

  There are two ways to change what happens when you press the power button on your computer. You can change what happens when you press the power button on your computer case (or the edge of your laptop) and you can change what happens when you press the close button in the start menu.

  Change what happens when you press the power button on your computer

  http://Windows.Microsoft.com/en-us/Windows7/change-what-happens-when-you-press-the-power-button-on-your-computer

  Hope this information helps. If you have questions to answer us and we will be happy to help you.