Where is Adobe Memory Booster available?

Tried to search the Adobe website for this under products without a bit of luck. My seller (Hewlett-Packard) laserjet recommends that I use the technology called Adobe Memory Booster to extend the memory available for older printer without adding SIMMs. Found the Adobe doc on a page called Postscript 3 (where my post on this forum) that describes what does AMB but not if it is a software that can be downloaded, or what.

Adobe Memory Booster has never been a product for the end user with Adobe. It's compression technology intermediary list view data in an Adobe PostScript application that was part of the are placed on a product by the OEM from Adobe. When this memory was popular, memory was extremely expensive. Of course is no longer a major problem.

Anyway, it is not a technology that can be installed in an existing product. The last HP LaserJet that uses Adobe PostScript technology have been released there is around 13 years or more.

-Dov

Tags: Adobe PostScript

Similar Questions

  • nlsdl.amd64.exe error 'not enough memory is available to process this command. "

    Hello

    Recently, I was introduced to the multilingual support for use in my applications. I went to microsofts site to learn the tutorial here, but when I install the Microsoft National Language Support API 1.0 returned then try to install the nlsdl.amd64.exe installation package, it gives me an error "not enough memory is available to process this command."

    I increased the IRPStackSize to 15 (0xF) and restarted just in case where. Tried to install it again. The same problem. One thing I noticed and tried to delete was my external storage drive that acts as a RAM drive as the first time I tried to install this that he actually unzipped in external hard drive instead. Do not change.

    What can I do to solve this problem and continue on this tutorial?

    Here's what I'm working with on professional W7 X 64.

    Add the Support of Board multilingual user in an Application

    Microsoft National Language Support returned APIs 1.0

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • VMware Workstation 6.5 - not enough physical memory is available to power on this virtual machine

    My host is a processor Intel Core i5 (active VT) and 8 GB of RAM Windows 7 64 bit running with hardware virtualization enabled.

    Apart from McAfee Antivirus and the usual Windows updates, no other software has been installed on the host machine.

    I am running Vmware Workstation 6.5 and I installed 3 popular VM with below guest OS, s/w and memory:

    VMware ESX 4-2 GB
    Server 2003 (DC and DNS) - 1 GB

    Server 2003 (vCenter Server) - 1 GB

    However, it is not possible for me to all 3 virtual machines run simultaneously. If I turn on Vmware ESX 4 and try to start Windows 2003 VM, it displays the following message:

    Not enough physical memory is available to power on this virtual machine with its configured settings.

    To resolve this problem, set the parameters in additional memory to allow for more virtual memory machine to swap.

    If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.

    Can you get it someone please let me know where are the rest of the memory is busy? Size of total memory of 3 virtual machines are only 4 GB and I have to be able to run all the VMs set 3, but in this case I can't even run two virtual machines simultaneously.

    Please help what should I do?

    With 8 GB of RAM on the host allowing why only 1 GB to be reserved for all you run virtual machines?

  • Adobe digital edition available in Windows 8 RT?

    When is adobe digital edition available in Windows 8 RT?

    Moving to this discussion on the Adobe Digital Editions forum.  MartyrWorthy you can also see http://forums.adobe.com/message/5239107#5239107 where this subject has been discussed.

  • Error: Not enough memory is available to process this command

    On one of our servers running Windows 2003 SP1, CFMX 6.1 (6,1,0,83762) we get the following about every other day.
    "Not enough memory is available to process this command." The message only appears on one of the .cfm pages and other .cfm pages are stillaccessable. We have more than 2 GB of available disk space and 1 GB of RAM so I don't think that either of those who are the problem. In order to solve the problem, I just stop/restart CF and then everything works OK. The only thing I know that has changed with the server in recent weeks, it is that the following MS Patches have been installed: MS06-013, MS06-014 and MS06-015.

    Is anyone of another experincing the problem and if so, what is the solution. I realize that I could always uninstall patches, but wanted to know if there is another solution before that.

    Thank you

    It seems that my problem was related to client variables fills the register. Once I cleaned out the registry usigng the following technical note variables the application worked fine.

    http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_17881

    I also installed a client patch for variables.

    http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=b3a939ce, "Hot".
    fix for client variables (Article 19590). »

  • Tecra A8 - not all memory is available

    Hello

    I've recently updated my laptop 4 GB unfortunately same performance of 64-bit (Windows Server 2008 x 64) operating system not all memory is available (only 3318 MB).

    After some research, I discovered that this high memory of 3318-4000 MB is reserved for other devices such as cards PCI interface and graphics etc.

    This is to support the 32 bit OS that can only address the memory in this range.
    This makes the + 682 MB of my memory upgrade the invisible state.

    Usually the Bios supports a feature called memory h_o_l_e * remapping that moves the address space reserved which precedes him the physical memory installed on the machine charging the full memory installed to be accessible on the 64 bit OS.

    Please can you release a BIOS update that supports h_o_l_e * remapping memory or I would like to know if there is another way to get around this?

    Thank you
    * Ps I appologise but I had to change the word h_o_l_e to override this error "your message contains profanity or inappropriate language.

    Hi mate

    Maybe you should check this doc:
    + The requirements for the use of 4 GB of main memory.
    http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

    Here you will find information which is necessary to access the full 4 GB of RAM.
    -The chipset must support 8 GB of address space.
    -The processor must support 64-bit mode instruction set
    -The BIOS must support the memory remapping feature.
    -A 64 bit version of the Windows operating system is necessary.

    If one of these components doesn t give the RAM of 4 GB capacity then your laptop won't recognize 4 GB RAM but only 3.2 GB.

  • HP laptop laptop 15-r132wm: 15-r132wm memory slots available

    Can someone tell me how many memory slots and HARD drive locations there is on the 15-r132wm?  I constantly searched and can't find a definitive answer.  I don't want to go digging inside my laptop, if there is no additional storage/memory space available.

    Thank you very much!

    DJ PlaZma

    Hello

    Yes from the book

    Kind regards.

  • Not enough memory is available to complete this operation

    Hi I have a problem with reading the data of Access database. If I want to analyze a product these datas on 6 months, for example, I got the message error "not enough memory is available to complete this operation"

    The line of code that makes this error is

    "aValues = RecordSet.GetRows (-1, 0, aColumnNames).

    I have 1 GB of RAM on my PC but I also tried on PC with 2 GB of RAM it does not help.

    Is this a problem with the Microsoft MDAC? I work with Win XP SP3 and MDAC 2.81 SP1.

    I have no idea more wa could be the reason...

    Someone has an idea or the same problem?

    Best regards

    Hi Suttema,

    I would like to try a request for Recordset buffered, instead of asking all records at once.  See if this example helps.

    Brad Turpin

    Tiara Product Support Engineer
    National Instruments

  • try to install KB942288, get - message "not enough memory is available to process this command."

    KB942288 installation, get message "not enough memory is available to process this command."

    What storage speak?

    See...

    Windows Vista Help: Strategies to free up disk space
    http://Windows.Microsoft.com/en-us/Windows-Vista/strategies-for-freeing-disk-space

    Then...

    Open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    Vista Service Pack 1 (SP1) or SP2 installed?

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • XP logon message... system couldn't open session... not enough memory is available to process this command.

    Windows XP has just received the last update.  If a user is logged on cannot pass between users because when do you a pop up and States opening message... "" the system could not log due to the following error: not enough memory is available to process this command "."

    -Have concerts and gigs of free hard disk space
    -Currently 2 GB RAM
    -He just started this
    -The system does not allow more than 1 user at a time to log in now
    -If you try to connect more than 1 user, it displays the error message and cannot connect again, even not the original user, you must restart the system.

    So what's happening?  Is it a mind foopah the latest patch XP?  Why can't connect more than 1 user on?  I used to be able to connect the whole family and switch between users!

    Remove your antivirus (Norton, Bitdefender 2010, etc.) and try to connect again.  It should work.  Then download Microsoft Security essential Microsoft and you shoul be ok.

    Vitin

  • Office Tower Inspiron 530, where is the memory slot?

    where is the memory slot?

    Do you mean the connector for installing more RAM (computer case): http://support.dell.com/support/edocs/systems/inspd530/en/OM/HTML/parts.htm#wp1580857 depending on what variety of Inspiron 530 you have, you can have 4 connectors (items 3, 4, 5, 6, & in this image) or only 2 (points 3 and 4 in this picture)

    Or a player where you insert devices such as card SD cards? http://support.Dell.com/support/eDOCS/systems/inspd530/en/OM/HTML/settin58.jpg

  • Download "not enough memory is available to process this command." When installing umdf.exe

    Hello, I tried to configure this file umdf.exe

    but this error pops up: "not enough memory is available to process this command." "The installation did not complete.
    There is a lot of memory and disk space
    So could someone tell me what to do?

    Hello

    Follow these steps to get the fixed number.

    First copy umdf.exe of "wmp11-windowsxp - x 86 - enu.exe" on your desktop, two methods:

    (a) decompress wmp11-windowsxp - x 86 - enu.exe (ex: with TotalCommander-> Alt + F9) and copy umdf.exe on your desktop

    (b) run the wmp11-windowsxp - x 86 - enu.exe (if you run it will extract the folder folder)
           
    Click Start-> Run-> %Temp% [ENTER]
    Press F3, and then search for "umdf.exe".
    Copy this file to your desktop
    Cancel the installation of WMP11
     
    Rename the following files, it just copy & paste into your command prompt:

    Rename C:\WINDOWS\system32\drivers\wudfrd.sys test_wudfrd.sys
    Rename C:\WINDOWS\system32\drivers\wudfpf.sys test_wudfpf.sys
    Rename C:\WINDOWS\system32\wudfhost.exe test_wudfhost.exe
    Rename C:\WINDOWS\system32\wudfsvc.dll test_wudfsvc.dll
    Rename C:\WINDOWS\system32\wudfx.dll test_wudfx.dll
    Rename C:\WINDOWS\system32\wudfplatform.dll test_wudfplatform.dll
    Rename C:\WINDOWS\system32\wudfcoinstaller.dll test_wudfcoinstaller.dll [ENTER]

    Now run the umdf.exe and reinstall it. After that is finished, connect your phone and your MTP problem is solved.

    Bravo!
    Santosh Narayan

  • Move (or copy) files__Error GRAND 0x8007046A: insufficient server memory is available to process this command

    error 0x8007046A: insufficient server memory is available to process this command on BOTH Vista and XP, when you try to move LARGE (> 100 GB) files from drive 1 to external drive connected locally

    Currently trying to use robocopy and changed the

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer
    50 to 12 \Parameters

    WHY is happening.  GREAT video becomes more common, this will become a growing problem?

    E-mail address is removed from the privacy *.

    Just got "insufficient system resources to complete the service requested, using robocopy on my xp machine.

    This becomes a very serious problem that I have almost 200 GB tied up on my local disk in two files that I need to get away!

    Help!

    Boblevy,

    I had this problem with the Western Digital external drives in the past. There is an article on this specific error found here:
    http://support.Microsoft.com/?scid=kb;en-us;177078

    It refers to the same registry key that you mentioned above. You mention that you are changing the key; If it helped?

    This may be caused by your antivirus and it may be interesting to try this copy even in Mode safe and then further identify the issue with a clean boot:

    Method 1: Put the computer in safe mode and see if the problem persists:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Method 2: Clean boot

    If the problem is not repeated in safe mode, there is probably a startup item or service is causing the problem. Follow the steps on the following link to locate the item or service responsible for the error:

    http://support.Microsoft.com/kb/929135

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "Not enough memory is available to process your order" when you try to install the drivers

    Recently, I have problems when you try to install the drivers for a USB mouse that I have. When I plug the mouse, it detects it and tries to install the software but it gives me an error saying he found the software but can't install it because "not enough memory is available to process your order."

    I spent a bit of time, search tries to find a solution to this problem, and I tried a lot of things without success.

    I tried the things:

    -Manually installed the drivers. While I can install them, Windows does not recognize the drivers as being installed and the mouse still not working.

    -The fix IRPStackSize. It was not in the registry, so I thought this might be the solution, but it does not solve my problem.

    -Troubleshooting and repair of Windows Update. I had a memory leak problem with Windows Update, so I thought fix which would cure the problem. I was able to d/l an update that corrects this problem, but it does not solve the driver problem.

    Anyone have any ideas on how to solve this problem? Thanks in advance.

    Hello

    Thank you for your response.

    I appreciate your time.

    I suggest you run the system file checker (SFC) and see if it helps.
    Reference:
    Use the System File Checker tool to repair missing or corrupted system files
    https://support.Microsoft.com/en-us/KB/929833

    System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

    Please keep us informed.

    Thank you

  • Installer corrupted Windows - not enough memory is available to process this command error prevents me to update.

    My installer of Windows probably corrupted, as it gives the "this installation package cannot be opened.  "Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package" message during the installation of some programs.  I'm now using Windows 7, but the problem has been around for my Vista installation.  I am unable to do a clean install of the operating system that didn't record because I bought 7 through the Win741.com agreement.
    In addition, when I try to update Windows install, I get the message error "not enough memory is available to process this command."

    I tried several things, like the safe mode, the command msiexec \regserver (maybe wrongly?  "He wouldn't take it without space), and nothing works.  I guess I should add that I tried it works as an admin too, given that always gets mentioned - and probably should be.  Help?

    You are welcome to help.

    To exclude a problem with your user account can you try an another user account with administrator privileges (create one if nessary) and then try to install the applications of this account.

Maybe you are looking for