Where is line-in on my Equium A300D?

Similar Questions

• Equium A300D - 13 X - where can I order a recovery disc?

  Hello

  I cannot load passed to the handler to boot on my laptop and so am not sure if it a hardware/software problem. There seems to be a problem with AVG Antivirus, and if I want to reinstall my operating system to a product Recovery CD/DVD. However I do not know where to order one of my model. If this does not work, I intend to buy a new hard drive and could do with the disc anyway.

  Model: Equium A300D - 13 X
  Number: PSAK2E-001003KS

  Does anyone know where I can order one from?

  Thanks in advance for any help.

  Andy

  Hey,.

  That s is very easy, you can order a recovery for your portable disk here:
  https://backupmedia.Toshiba.EU/landing.aspx

  :)

• Equium A300D - 16 c turns on but the screen does not show anything / remains black

  Hi, I have a laptop Toshiba Equium A300D - 16 c.

  It was fine until now...

  When I press the power button, my laptop turns on but the screen remains black / off.
  The indicator disk HARD is not Flash or anything... (in case that helps)
  I also tried to remove the battery, hold the power button for 30 seconds and then reconnect the power cord... Same laptop turns on but the screen is black.

  I tried to connect my laptop to my PC using a HDMI cable screen, but without success... Laptop turned on but monitor my pc showed nothing.

  I have not changed anything inside my computer laptop or unscrewed it.

  PS:
  Quite often, I kept my laptop on the bed/pillow it may have something to do with overheating or something.

  How did I get to this point:

  Yesterday, my laptop was fine, there was nothing wrong with her... I turned off during the night, but when I tried to turn it on this morning it is where I have faced this problem.

  Any help would be appreciated.

  Thank you very much
  Rejanu.

  Long ago, I had similar problem on my old Satellite. CPU was faulty. After replacing the CPU, everything was OK again.
  I put t really know what to say.
  Maybe you should contact Toshiba and let check your laptop. They have diagnostic tools and may know what is the problem.

  What do you think?

• Equium A300D - no detected recording device

  Every afternoon,

  I have a Windows Vista - and a Toshiba Equium A300D - sound recording device has stopped working - there is no visible device in the sound settings either. Please notify drivers that I need to reinstall and where I can download them. The motherboard is - Toshiba Equium A300D.*

  Also my computer stops powers upward on its on. What can I do to make him stop and puts only when I turn it on again?

  Your help is appreciated.
  Thank you

  Hi Acorn1,

  Do you mean the internal mic of your laptop?
  If so, you must reinstall the driver for the webcam because the microphone is a part of it. You can get the driver on the Toshiba site.

  In addition, if your computer turns disable you in the BIOS:
  -Wake up on LAN
  -Wake up on keyboard
  Sleep - USB & Charge

• Need drivers Windows XP for Equium A300D - 16 c

  Hello

  I recently bought the Toshiba Equium A300D - 16 c, but I wanted XP but I thought support only in Vista, but you could buy XP and reinstall.

  So I reformatted the PC, installed Windows XP Pro.
  But my main concern is the drivers, where can I get them?

  I looked on the site of Toshiba Driver but it only shows the Vista drivers.
  I have no need of all drivers just the main... can someone tell me where I can get the XP drivers for this model?

  Thank you

  Rowan88

  Hello

  I really wonder you already deleted Vista, Windows XP Home Edition installed without address information on support for Windows XP Home Edition. I also hope that you created the recovery DVDs until you have deleted Vista.

  Back to your problem. Support for Windows XP Home edition for your laptop model can be a bit more problematic. I have laptop AMD too and my phone is not supported WXP. I think that there is not much difference between hardware platforms for Equium, Satellite A300D and P300D.

  Check the Toshiba support site a little and try to install drivers for Satellite to satellite. Maybe you'll have success.

• Need drivers of Windows XP Home for my Equium A300D

  Model number - PSAK2E - 001003KS
  Serial - 58316186w

  Hi all!

  I bought an Equium A300D-13 x today and I have taken Vista out of it and installed WXP Home + SP2. All is not well! I still need some drivers, the machine runs on an AMD turion and I can't find the chipset drivers so that he any where! Also his running an AMD graphic card, once more I can't find compatible drivers for it.

  The chipset drivers only available from what I saw was the Intel ones.
  I hope you can help!

  I agree with the master of disaster (by the way; really funny nick: D)
  The satellite series is very similar to the series of satellites and therefore published for the satellite series pilots could operate satellite phone on the computer too.

  It's worth a try!

• Equium A300D - how to save on another hard drive?

  I just got an alert Tempro my 'C' drive is full of more than 75%. My laptop (Toshiba Equium A300D) seems to have 2 hard drives, "Vista C:" label, and an another 'E:' labeled 'Data'

  The 'C' drive appears currently 31 GB on 117 GB of free, when the disc of 'E' indicates 108 GB GB 113.

  Is it possible that I can save documents to the disk 'E', which has a lot more free space, while retaining my existing directory structure? At the present time, all my diirectories and its subdirectories, including Vista 'Documents', 'Music' folders etc are on the 'C' drive, and I really don't want to end up with two sets of directory structures.

  Hi BlissC

  You can save your documents, photos, etc. on the second partition. So you can save disk space for applications that you install on the first partition.

  Just right click on each file that is stored in your user directory (e. g. music, documents, photos, downloads, etc.), and then choose Properties. There you can change now where the file should be saved.

  I also moved my documents on the second partition. :)

• Equium A300D - maybe my HARD drive is dead

  I bought my Equium A300D (I think it's the correct model anyway) of PC World in the year September last after the death of my old laptop on me (fried hard drive because of the processor cooling fan break).

  The old laptop, has produced some sounds strange whirring/screeching sometimes for a few months, but I'd rather foolishly ignored it thinking it was just a fan who wasn't quite to the right or something - in hindsight to make a good decision!

  My Equium was fine until I turned on this morning and found that he formulated the horrible familiar screeching/whirring sound and I turned off again pretty quickly.

  The screeching kicked almost immediately after, I had it working. Three times I tried to turn on the back, with the same result, and it's understandable, I am very worried about it and did not want to take the risk of leaving that he turned on for fear of causing more damage.

  Sick computers are never good news in the best of cases, but not at the moment that I went through a lengthy form filling and complex that I have loan on Wednesday. I'm completely it on a pdf version recordable of the form that took me three weeks to finish where I had got up to last night, and even if I use an online backup service, I can not restore files to a different computer without overwriting what is already there, so I'm a little panic. (Also, my Equium has a Vista OS, and my office, I'm currently is still on XP).

  Three questions:
  (1) makes a whirring/squeal noise as soon as it is lighted sound it could be another hard drive dying?
  (2) would be to take it to my local independent computer store (which tend to be able to make minor repairs and put new disks while you wait) rather than PC World voiding the warranty?

  I'm not sure what to do for the best, like whatever I do I need to do it quickly, because I have not long until I have to complete this form (and even if I have the online backup, rather stupidly I don't have an external backup of it), and even if I can get the fixed satellite quickly if it's the hard drive , it takes a number of days to download and restore online backup files, which is sometimes I have at the moment.

  Any advice would be appreciated.

  > 1) makes a whirring/squeal noise as soon as it is lighted sound it could be another dead hard drive?
  It's not impossible My HDD makes a completely dead before it too strange noise.
  It was a good idea that you have backup your data. In this case you could always recover the data if the HARD drive would really die.

  (> 2) take to my local independent computer store (which tend to be able to make minor repairs and put new disks while you wait) rather than PC World would invalidate the warranty?
  If you want to get the HARD drive replaced and want to use the warranty, then you should contact the ASP (certified partner) in your country.
  Qualified service technician can replace the defective hardware, a free game.

• Equium A300D-13 x stucks on the installation screen

  Recently, I sent my laptop (Equium A300D-13 x) back to the Toshiba to fix because it was overheating and cutting.

  She came back today and when I turned it on I got the screen where I was asked if I wanted to go in safe mode or start Windows normally.
  Then it goes to a screen where it says, * complete the installation may take several minutes.

  Please do not interrupt or shut down the computer! *

  I waited all day today and I'm still stuck on this screen.

  Someone had the same problem? And if so, how can I solve this?

  Hello

  I've recovered my laptop several times and the installation always goes smoothly.
  But of course this installation problem could happen still and I think that you should just repeat this procedure.

  If you have n t Toshiba Recovery disk then try to recover the laptop using the recovery of HARD drive option.
  Just press F8 while turning on laptop.
  Then choose fix my computer. Then a new window will appear and you can select the new option called Toshiba HDD.

  Check it out!

• Exchange of view on Equium A300D

  I have 2 x Toshiba laptops. Satellite A200 Equium A300D.

  My question is: the display of work in the A200 A300D?

  I know they use different inverters and different connectors on the motherboard to inverter cable but the screen of the A200 works fine it does not work in the A300D. What I see is a picture very dark

  BTW the A300 fine output to an external monitor

  Any help gratefully received

  Maybe you need to just Exchange defective FL inverter on your A300D and must not exchange any display.

• My Equium A300D freezes at BIOS

  Someone help with this one?

  My Equium A300d froze in the Bios boot screen. Finally, I have replaced the ram and hard drive but still the same problem. By trial and error I discovered that the problem was the dvd drive... Remove the system and it loads well, put in place in and from the gel to the bios!

  I replaced the dvd drive wiith a new compatible drive but same result so assume the real hardware is not the problem then can only assume a motherboard problem?

  Has anyone encountered this scenario? Thanks for the research.

  It's really strange question. What version of BIOS is on your computer?

  If I understand you well without ODD your laptop starts properly and preinstalled operating system can be loaded.

  Have you tried to implement ODD when Windows is fully charged?

• Equium A300D - 16 c - display does not

  My girlfriend has an Equium A300D - 16 c which had some problems lately.

  In recent months, whenever she turns on the system, the display does not pull upwards and it takes several tent for lights.

  The strange thing is every time that happens, the system boots normally always that you can hear the Windows 7 startup sound.

  I'm looking for in this question for some time now and I'm running out of ideas.
  Initially, I thought that it could be a wiring problem but by stripping the laptop down, I found that the cable was still firmly in place.

  I also tried to remove the RAM, HARD drive and DVD drive, but it still doesn't pull upward. On the odd occasion she started upward when you do it, but after restart, it has not started again.

  I think that this could be either a transmitting power or the mother board is on its way. This problem has worsened gradually (it took more than 20 attempts it turn on and off this morning) so finally he come not at all.

  To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.
  I tried to keep the power with no energy source button to unload the system, but it does not help.

  I also noticed that if you hear it boot and close the cover, the reopening of the display lid will come on but with the bad (1024 x 768) resolution that has intrigued me even more.

  Any ideas on what could be the problem? I would repair it rather than just buying a new as its still a decent system apart from this problem.

  > To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.

  This means that you can use the laptop as part of the external screen, but it does not work with the internal screen?

  This means that the internal display module isn't OK. It probably needs to be replaced.
  But this does not explain the problems while turning on the laptop.

  In the worst case the mother for laptop AND the internal screen are affected, but it would be really strange and rare bad luck

• Re: Equium A300D - 13 X - boot problem

  Hello

  I can't initialize problem. Powers of phone on ok, with a few flashes of HARD drive as it tries to start. But no sounds other than the kick, fans have tried all the usual things like FN/F8 to enter safe mode, also cold start battery and network opens. Power button down for an all black screen minute etc etc, but still no screen or emits a signal. I suspect a power supply problem and have tried with different loader but no effect. Laptop is a 4 year old Toshiba Equium A300D - 13 X everything worked fine but I recently renewed keyboard, screen bezel, Mo media Ribbon, power/Ribbon button, Mo.

  I thought I might have left some cable detached so all reopened and checked, but everything is correctly fixed I think.

  Any help would be greatly appreciated.

  Thanks Bob.

  Hello Bob

  It is not easy to be objective with this problem. On one side you have disassembled your laptop on your own and we don t know if everything was done correctly. I m also not technician and each laptop disassembly has been a success.

  I put t really know what to say. Try to talk with someone who can help you with this and check if everything is OK. Small error as causing electrical circuit can damage the electrical components of the motherboard. Try to check the display cable connection.

  Have you tried to connect the laptop to the TV and check if all come to this?

• Windows installation interrupted as Equium A300D stops itself

  Hi all

  I've had my Toshiba Equium A300D for 2 years now. Meanwhile, it works normally, sometimes stops himself maye because it was too hot.

  Recently, he tried to install updates to Windows Update, but never successful. I left the computer to update all night and there was 2 of 12 updates... all the time so I always had to shut down the computer by pressing the power button.

  I was unable to change the setting to update Windows automatically, because every time I tried to do it froze. Most of the other commands became even viewing photos that do not meet.

  It was until my computer could not connect to a certain wireless network, while other devices may I decided to reinstall Windows completely. He was installing normally but it got too hot and the computer closes again!

  I tried to install again and he was arrested again, but I got up in the final phase of the game when I turned it on again, it was always 'finihing the installation may take several minutes. lease do not interrupt or shut down the computer. Let him over several hours, but he did not move to a different stage. Before the computer shuts down, I think I arrived at the scene after that.

  I tried to press F8 to start a new installation, but he's only got in this screen.

  What can I do?

  Please help me! Thank you very much in advance!

  I am in Germany at the moment, but I live and I bought this computer from the United Kingdom.

  ttd500

  Hey,.

  You can test Windows with Toshiba Recovery disk installation, please?

  The disc usually contains only drivers and software prétestées so installation shouldn't t be a problem because it s pre-tested software from Toshiba.

• Equium A300D - after updating the BIOS screen is empty

  Hi, I did a bios update on my Equium A300D-PSAK2E and its bricks of my laptop! When it restarts after update screen is empty!

  Is there a a sort of way to launch a recovery of bios by pressing certain keys on the power on the image of the bios on a USB?

  Kind regards

  Dan

  Hi Dan,.

  Unfortunately I think that there is nothing you can do if the BIOS update gone wrong... In this case the ROM module must be reflashed to an authorized service because guys have special tools to do this process delicate reflash.

  You can find a list of aspic here:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT