Where is the check box "Direct connection" to the pool passed in View 4

Similar Questions

• "Direct connection to the desktop" and external clients

  Hi all

  I'm doing a View 4 u1 installation with a connection to the server and a security server. I just want to confirm with the setting to view administrator, check box "direct connection on the desktop.

  I find that if I check it, then external clients of internet do not work - can see the office pools, but at launch, the customer will see appear in the taskbar, disappear. When I uncheck, all external clients work very well.

  my understanding is that this check box determines whether RDP traffic will be dug by the connection to the server or it will go straigh from the clients to view offices. I though that this setting affects only internal clients. I don't see how it affects external clients that connect through the Security server.

  When you look at 'netstat' of external clients, trying to run the office, I can see the threshold to appear when the customer view disappears, it will also disappear. Looks like when the box is check (direct connection), the client view external attempts to establish the RDP directly on desktop computers, apparently, it won't work. So, how can a direct connection for internal clients only?

  TCP 192.168.20.2:56473 winxp - 04:ms - wbt-Server SYN_SENT

  any ideas?

  Thank you

  Ming

  In our environment, we have our external users (Security Server) use a broker who has direct connect disabled while internal users use a different set of brokers that are defined to use direct connect.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• where is the check box of the column of the history?

  I use jdeveloper 11g version 11.1.2.2.0.
  I worked through the demo showcase and the said instructions.
  Open the object of the entity, click the attributes tab, select the historical column check box.
  
  I am unable to find a historical column on this version check box. where at - it go?

  I think it is called history of lane change now - a drop down menu.
  You can also search in the property inspector window.

• Where is the setting to warn that "the information you entered must be sent over an unencrypted connection?

  Where is the setting to warn users to "information you entered must be sent over an unencrypted connection"?

  The settings for warning messages have been removed from the UI (Bug 513166).
  You must change preferences related security.warn_* directly on the topic: config page.
  
  Filter: security.warn

  You can check the security.warn_submit_insecure pref on the topic: config page.

  BTW: Firefox 10.0.3 ESR is not the last.

  • ESR 10.0.x Firefox: http://www.mozilla.org/en-US/firefox/organizations/all.html

• Can a checkbox State (true/false) another State (different) check box in the control?

  Hello

  I am trying to find the answer in the internet and here in the support forums, but so far without success.

  So, I was wondering is it possible to make a CheckBox control (checked/unchecked) other (different) box in the same table.

  Lets say I have a list of items to take on the assignment in the field (in separate lines) in my checklist. Some of these items will be check together so that both can work as one.

  For example - gas generator and fuel tank:

  You can check the box next to "gas tank" if you need to take only,

  But if you check 'gas generator' numbers should automatically check the "fuel tank" so I remember to take it as well to the generator.

  So, please help me with the formula if there is possibility to do so in the last app (OSX) number. Thank you.

  Hi Shkacas,

  Perhaps you might consider to penetrate your activities field trip.

  

  The elements required for each activity are in another table. You can 'hide' this table by moving (copy / paste) to another sheet. The formulas will adjust automatically.

  Formula in the Input Table C2 (and fill down)

  = IF (B2, CONCATENATE (Required::B2 elements ",", Required::C2, ",", elements Required::D2, ",", elements Required::E2),' ')

  Ignore the additional decimals in the result. These are refills for empty cells in the table of the required elements.

  Another example where insГЁrent the check boxes unchecked "" (NULL, empty)

  

  Kind regards

  Ian.

• Discover device directly connected to the cisco ASA

  How do I know which is directly connected to an ASA interface? I'm looking for some commands that can be executed on the SAA to find the directly connected Cisco device.

  Thank you

  Boudou

  Unfortunately it is not available on SAA for you tell what device is directly connected to it, there is no 'see the neighboring cdp' on SAA unfortunately.

  You can check the ARP table and see which is the next hop, but who would only give the layer 3 device, such that there could be a switch between the two institutions.

• Internet does not connect unless it is directly connected to the computer

  This problem occurred yesterday.

  Internet has suddenly stopped working. Things were going to turn power off, then on and distributed. I did check the lights on the modem and the router, but they were all working well. I have plugged on both computers. This does not solve it. I called Charter to see if there was a failure. Unfortunately, it's a message auto troubleshooting which I have materialized with. He had me hang my modem directly to my computer. This solved my problems of the internet.

  I went to sleep for the night in the hope that the internet, or what the question was, would fix itself. He did not. The internet still works only if it is directly connected to the computer.

  There are other people who need to use the internet here. (Invoices, work schedules and other) So maybe it's very much a problem. Any other computer or phone, will work in the House.

  What is a router problem or a cable, or...?

  If your connection works when you plug the modem but not through the router, this indicates a problem with the router.   This could be a hardware failure or a configuration problem.  A problem with the cable between the modem and the WAN port on the router is possible, but unlikely.  It wouldn't hurt to check if she.  Most routers have a reset button recessed.  I suggest that you reset the router and reinstall as if new.  If this fails, you probably need to replace the router.

  Depending on your technical knowledge, you can also log in to the router and check the status information.

• Clear the check box in the new if invalid table line

  Hi all.

  I use JDev version 11.1.2.4.0.

  I have a table with 2 columns, which one of them is a checkbox. I want to clear this check box if the user inserts a newline invalid. So far, I have an EL expression in my field to disable: disabled = "#{viewScope.viewBean.disable}", where a Boolean variable disable is. "

  I put the variable Boolean true when the user inserts a line not valid, but I am not able to update the fields. The only way I can do this is to update the entire table, but then I lose the filters.

  For example, I want to do something like this:

  I have a VO employed with the salary attribute where the user can search/insert/update / delete. The user searches for all employees with > 30 k salary. Then, the user inserts a new employee, but he or she inserts one that's already in the DB. So, the line is not valid. I want to disable the all check box in my table WITHOUT losing the > 30 k search salary. If I update the entire table, the search has disappeared and all employees are shown.

  Any ideas?

  Edit: I also tried this approach, but I had the same problem with a refreshing existing lines: https://udayarocks.wordpress.com/2011/07/30/how-to-conditionally-enable-disable-the-column-contents-in-the-adf-11g-table...

  The transitional value will remain if it is added to the OS, not the VO.

  Timo

• Check box in the header of the classic report: select all the report Archives

  Hi friends,

  I use Apex 4.2 worm.

  I've created a classic report and create the check box (apex_item.checkbox (1), EMPNO, 'DISABLED' tick,) in this report.

  My Code

  Select * from)

  Select

  apex_item. CheckBox (1), EMPNO, "DISABLED" tick.

  "EMPNO', 'ENAME', 'JOB', 'MGR', 'HIREDATE',"SAL","COMM","DEPTNO. "

  from EMP)

  where)

  InStr (upper ("ENAME"), upper (nvl (: P6_REPORT_SEARCH, "ENAME"))) > 0 or

  InStr (upper ("JOB"), upper (nvl (: P6_REPORT_SEARCH, "JOB"))) > 0

  ) and

  (nvl(:P6_ENAME,'0') = '0' or ENAME =: P6_ENAME) and

  (nvl(:P6_JOB,'0') = '0' or JOB =: P6_JOB) and

  (nvl(:P6_MANAGER,'0') = '0' or MGR =: P6_MANAGER)

  and

  (nvl(:P6_DEPT_NO,'0') = '0' or DEPTNO =: P6_DEPT_NO)

  I need to create the checkbox in the header of the classic as tabular report where if I click in the header box then all archives should be checked.

  How can I do this with classic report.

  If you want to see this issue in the workspace, then you can use the workspace details below

  Workspace: APEX_ISSUE

  User name: [email protected]

  Password: kaushik1@34

  Page no.: 6

  Thank you

  Hi Maxence,

  The above problem is solved. Please check the same.

  I added the following code in the header of the first column:

  NOTE: I used Carl Backstrom solution for this: Blog of Carl Backstrom: Mini check all HowTo

  But this solution works only when the first column in your report / table is a checkbox.

  If you have more columns rather than the first column where you want to check and uncheck all the features then follow the solution of Jeff Kemp:

  http://jeffkemponoracle.com/2012/11/15/select-all-Unselect-all-checkbox-in-interactive-report-header/

  I hope this helps!

  Kind regards

  Kiran

• Conditionally Enable and Disable select any check box in the report position only?

  4.2.1

  THM: 2

  Hello

  I have a classic report with an apex_item.checkbox2 as the first column. I also had to add a "Select all" check box in the header. I did it by adding this to the column header

  < input type = "checkbox" onclick = "$f_CheckFirstColumn (this)" / > "

  However, there is a requirement where in I need to disable this "topic" check all (line remain) when a certain field is not filled.

  For example: P2_fLAG which is a page element is null, then select it title all the checkbox should be disabled.

  Is this possible?

  Thank you

  Ryan

  ryansun wrote:

  This bump. Wondering if anyone has done this before?

  A took a look yesterday. May have the time to finish today.

  In this page if F1 and F2 are null and the user has selected "Select all" and click on the button. A message to standard error or alert apex must be indicated, asking the user to fill something in the fields F1 or F2.

  I think that the idea first of activation and deactivation of select box everything is the best approach. Always better to prevent the user from doing something than to allow them to do it and then tell them they can't.

• How can I activate a check box if the data have been entered in a different text field?

  Hello. I would use four check boxes on a form, each of which will enable (check) if the data have been entered in four text fields of form on a different page in the same form.

  Example:

  Page 1 will have a question like... How many apples did you eat last month? "Text1" = 3

  So, given that the user has responded to 3 in the field 'text1', "checkbox1" must now be verified on page 2.

  ... and so on for the other three.

  Note: The answers to the questions will be like a number. If the user enters 0 (zero), then I don't want the boxes to activate it. So, any greater than zero response will check the checkbox.

  Follow-up to question...

  Is it possible for a text field quite different form whether visible or not visible (default read-only text) based on the status of each check box mentioned above?

  Example:

  "checkbox1" will have a field of text next to it named "date1" with a date hidden. If "checkbox1" is checked (because of the above), then the date will be visible.

  ... and so on for the other three.

  Thank you very much!

  -You can use something like this as the custom of your text field validation script:

  if (event.value=="3") this.getField("checkbox1").checkThisBox(0, true);
  

  -Yes, but you shouldn't make it dependent on the box to check, but integrate it in the script above, like this:

  if (event.value=="3") {
      this.getField("checkbox1").checkThisBox(0, true);
      this.getField("date1").display = display.visible;
  } else {
      this.getField("date1").display = display.hidden;
  }
  

  If you also want to uncheck the checkbox where the value of the text field is not 3 then double online #2 but with the false instead of true value in the else block.

• How to disable the check box (line selector) in a tabular report of APEX

  I have a report in tabular form with checkboxes which is filled by a SQL query.  For some lines, I want to disable (or not) the box according to the value of one of the columns of that particular line (if the value of a column defined as Date is less than sysdate, I don't want to display the checkbox for that rank).  I tried to use the conditional display in the section of the column attribute of the checkbox, but I can't access this Date column that is currently selected in a view in the SQL source.  I used variables such as: name-of_column, V(':name-of_column'), but always get a NULL value for this column in the SQL code I'm trying code in conditional display section.  For this reason, my condition does not work correctly.

  What I am doing wrong?  Exceeds my correct approach?

  Hi Ajay,

  I don't think you can handle this with a conditional display, as that works on the column rather than level level line.

  The way I see it, there are two things you can do:

  (1) approach to sql, where youo make the checkbox in your query using apex_item.checkbox, see the documentation of oracle for detailed information on the use of the APEX_ITEM

  You'll end up with a query like

  Select case when YOUR_DATE_COLUMN<>

  then null

  else apex_item.checkbox2 (p_idx-online 1

  p_value-online YOUR_DATE_COLUMN

  )

  ,

  from YOUR_TABLE

  (2) an approach JavaScript in which you create a dynamic action check your date column in a table and when the need hides and disables the check box for that rank.

  First option is more robust, but it will take a little more work. Second option is faster to develop, but may have different effects on various browsers and browser versions.

  Regads,

  Vincent

  http://vincentdeelen.blogspot.com

• QUICK LAUNCH THE FORM ON THE BROWSER check box... I don't see it?

  Hello

  A few months for some reason any when I try to open it I developed adobe interactive form... I used to get an error message in a popup (sorry, I forgot this description of error message), then when I checked in google (I guess, adobe forums), someone suggested to uncheck QUICK LAUNCH THE FORM IN the BROWSER to the level of the form so, I did, worked fine.error disappeared, although

  Now, I want to use (check) the QUICK LAUNCH area again for the same shape, but, I couldn't find this check box in the options PEOPERTIES of the form menu, pls let me know where I can see this QUICK LAUNCH THE FORM ON THE BROWSER?

  Thank you

  Yes, that's correct. The users will have control on their preferences. I don't think that you can access it through the script.

  Niall

• How to create check boxes in the BEEP patterns?

  I create BI Publisher model for use with Siebel. In the data flow, the values for Boolean fields are passed as Y or N.
  
  However if I put a checkbox in MS Word and give the field in the property, nothing happens at all.
  I tried to use conditional sections and the font Wingdings to display icons checked and unchecked depending on the value of the indicator. But, when the report is run to PDF, Wingdings cannot be used.
  
  At the exhibition of the field directly, it fills with "Y" or "N". However, we want to check boxes.
  
  Any ideas appreciated.

  Have you looked at this blog? If this is not the case, take a look.

  http://blogs.Oracle.com/XmlPublisher/2007/05/wherere_my_checkboxes.html

  Thank you!

• Try to build the form using the check boxes - need help

  I am creating features using a region on the left to contain what I want (and it is stopped), an area on the right that contains all the rest I might add, with buttons in the middle to get things back (Add/Remove). I try to use the collections and APEX_ITEM. CHECKBOX and everything just do not have luck using the check boxes at all. Can someone tell me please a tutorial or an example that works in the way to read a collection by using the checkboxes and manipulate? Normally, I uses a FRONT of Validations process to update the collection with the changes that the user has provided, then follow up with any validations, then run any what DB written/modifications/deletions in a page AFTER VALIDATION process.
  
  Here's what I have so far:
  
  Area to the left (list of items already included in the package)
  
  (On the process of loading Page (before header) -: P182_PKG_ID is passed as input)

  apex_collection.create_or_truncate_collection
    (p_collection_name => 'DOCWIZ_CHKLST');
  
  declare
    v_lnid      NUMBER;
    v_ordr      NUMBER;
    v_pkg       NUMBER;
    v_type      NUMBER;
    v_typenm    VARCHAR2(47);
    cursor c_prepop is
      select a.ID, a.DOC_ORDER, a.DOC_PKG_ID, a.DOC_TYPE_ID, t.DOC_TYPE_NM
        from DOC_ASSIGN a, DOC_TYPE t
       where a.DOC_TYPE_ID = t.DOC_TYPE_ID
         and a.DOC_PKG_ID = :P182_PKG_ID
       order by a.DOC_ORDER;
  begin
    OPEN c_prepop;
      LOOP
        FETCH c_prepop into v_lnid, v_ordr, v_pkg, v_type, v_typenm;
        EXIT WHEN c_prepop%NOTFOUND;
        APEX_COLLECTION.ADD_MEMBER(
            p_collection_name => 'DOCWIZ_CHKLST',
            p_c001 => 0,          --CHKBX
            p_c002 => v_lnid,     --ID
            p_c003 => v_ordr,     --DOC_ORDER
            p_c004 => v_pkg,      --DOC_PKG_ID
            p_c005 => v_type,     --DOC_TYPE_ID
            p_c006 => v_typenm    --DOC_TYPE_NM
         );
      END LOOP;
    CLOSE c_prepop;
  end;

  Report area (column 2)

  SELECT apex_item.DISPLAY_AND_SAVE(1, SEQ_ID) SEQ_ID,
      apex_item.CHECKBOX(2, c001, 'UNCHECKED') CHKBX,
      apex_item.DISPLAY_AND_SAVE(3, c002) ID,
      apex_item.TEXT(4, c003, 3, 3) DOC_ORDER,
      apex_item.DISPLAY_AND_SAVE(5, c004) DOC_PKG_ID,
      apex_item.DISPLAY_AND_SAVE(6, c005) DOC_TYPE_ID,
      apex_item.DISPLAY_AND_SAVE(7, c006) DOC_TYPE_NM
    from APEX_COLLECTIONS
   where COLLECTION_NAME = 'DOCWIZ_CHKLST'

  Area to the right (complete list of topics already in the package possibilities)
  
  (On the process of loading Page (before header) -: P182_PKG_ID is passed as input)

  --Prep collection
  ---------------------------------------------
  apex_collection.create_or_truncate_collection
    (p_collection_name => 'DOCWIZ_TYPLST');
  
  declare
    v_lnid      NUMBER;
    v_ordr      NUMBER;
    v_pkg       NUMBER;
    v_type      NUMBER;
    v_typenm    VARCHAR2(47);
    cursor c_prepop is
      select 0, 0, :P182_PKG_ID, t.DOC_TYPE_ID, t.DOC_TYPE_NM
        from DOC_TYPE t
       where t.DOC_TYPE_ID not in (select DOC_TYPE_ID from DOC_ASSIGN
              where DOC_PKG_ID = :P182_PKG_ID)
         and t.DOC_TYPE_ID > 0;
  begin
    OPEN c_prepop;
      LOOP
        FETCH c_prepop into v_lnid, v_ordr, v_pkg, v_type, v_typenm;
        EXIT WHEN c_prepop%NOTFOUND;
        APEX_COLLECTION.ADD_MEMBER(
            p_collection_name => 'DOCWIZ_TYPLST',
            p_c001 => 0,          --CHKBX
            p_c002 => v_lnid,     --ID
            p_c003 => v_ordr,     --DOC_ORDER
            p_c004 => v_pkg,      --DOC_PKG_ID
            p_c005 => v_type,     --DOC_TYPE_ID
            p_c006 => v_typenm    --DOC_TYPE_NM
         );
      END LOOP;
    CLOSE c_prepop;
  end;

  Report area (column 2)

  SELECT apex_item.DISPLAY_AND_SAVE(1, SEQ_ID) SEQ_ID,
      apex_item.CHECKBOX(2, c001, 'UNCHECKED') CHKBX,
      apex_item.DISPLAY_AND_SAVE(3, c002) ID,
      apex_item.TEXT(4, c003, 3, 3) DOC_ORDER,
      apex_item.DISPLAY_AND_SAVE(5, c004) DOC_PKG_ID,
      apex_item.DISPLAY_AND_SAVE(6, c005) DOC_TYPE_ID,
      apex_item.DISPLAY_AND_SAVE(7, c006) DOC_TYPE_NM
    from APEX_COLLECTIONS
   where COLLECTION_NAME = 'DOCWIZ_TYPLST';

  Process - before validation page:

   Update Collection
  ---------------------------------------------
  declare
    i pls_integer := 0;
  begin
    for c1 in (
      select seq_id from apex_collections
       where collection_name = 'DOCWIZ_CHKLST'
       order by seq_id) loop
      i := i+1;
      --CHKBX
      apex_collection.update_member_attribute (p_collection_name=> 'DOCWIZ_CHKLST',
          p_seq=> c1.seq_id,p_attr_number =>1,p_attr_value=>wwv_flow.g_f02(i));
      --DOC_ORDER
      apex_collection.update_member_attribute (p_collection_name=> 'DOCWIZ_CHKLST',
          p_seq=> c1.seq_id,p_attr_number =>3,p_attr_value=>wwv_flow.g_f04(i));
    end loop;
  end;

  If anyone has a better way of doing things, I'm ready for it. The standard tabular forms appear not to be the right thing, because there will be TWO shapes on the page, that's why I went with a collection.

  Hello

  I just have a quick look and see what you're trying to do.

  One thing, you might want to consider, is that you use to identify each item (those who become G_F01, G_F02 etc.), index numbers can be any number you like up to a maximum of 50. So, your region on the left could use numbers from 1 to 25 and those rights could use 26 to 50 - little matter if there are gaps in the numbers.

  I'm actually about to close for the day because he went from 19:00 here now, so can't not consider this news right now - but if the above does not do, just update the thread and I'll have another look tomorrow.

  Andy