Where is the configuration of the Consolidation scenario

Similar Questions

• Fault tolerant in consolidation scenarios

  How do people manage fault tolerance in consolidation scenarios? A client can know in advance that they want to use Fault Tolerance on some servers. Obviously, using fault tolerant on a percentage of servers has the potential to affect the number of servers required.

  The Consolidation scenario does not take into account FT AFAIK.

  You manually cover an instance of the virtual machine on ESX hosts as the failure of FT and must ensure that the customer is aware that there is a load CPU and additional network for her.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Where is the configuration information for Workstation 6.5 / Linux kept?

  I make a partial backup of the box of Ubuntu that I have running Workstation 6.5, and I want to be sure, I'm saving all my VMware settings. / etc/VMware has some stuff, but he's not all that. For example, if I change the Favorites list, none of the files in/etc/vmware change. Where is the configuration stored?

  hostwide config: / etc/vmware/config

  configuration of the user: /home/user/.vmware/preferences

  Configuration of the VM: vmx file

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Set the consolidation method

  Hello
  
  I would like to ask questions about the consolidation method. I have the hierarchy as follows:
  
  1. the company possessed A company B 70%
  2. the company has owned by company C 45%
  3 company D from B 0.2%
  
  In the hierarchy above, B use full Consol, C will use equivalence (only absorb the Net result) and D will use cost (investment calculate only) method. When making this adjustment in HFM, where should I put % for POWN, PCON and PCTRL? HFM will read the configuration method that I have little matter how much % I place in these 3%?
  
  Appreciate your response.
  
  Thank you
  -Anna

  Hi Anna,.
  HFM knows nothing about consolidation if we configure the applicationsettings to use the logic of consolidation. In this case, if install you a mehthod in the file rules, no code at all, this method rolls not all numbers to the group for entities using this method. Nothing will happen, even intercompany eliminations.

  However, if install you the applicationsettings for not using the logic of consolidation, then HFM 'knows' the default method, which will practically roll all accounts using pcon and will also perform the inter-company eliminations. Note that the behavior of this group by default, can be emulated by a piece of code I've seen availble for several consultants.

  Now in the case using the custom, consolidation rules that the rules can be written in such a way that they can do special things, to the different accounts, customs or even combinations of them (or points of view as we say). And the author of the rule, determines also what will be the requirements of the system accounts pcon, pown etc. for his method works correctly. Usually, normal people give names that are meaningful to the methods they implement, even if the names tell us anything about what is the system requirements of their method. That's why I insist on the existence of the documentation on the methods.

  Kind regards
  Kostas

• Endangered on the consolidation of data

  I use HFM v9.3.1
  I created a new forecast scenario - load periodic (similar to the other forecast scenarios) already in the metadata
  I have load data into this scenario in an entity very well but when I start the consolidation of data disappear to zero
  I checked the new accounts are used and they are all set up as ASSET
  I loaded security, exchange rates, started the process control
  Don't know why this is happening as for other configurations of scenario did not happen.
  Please tell us if you can.

  Please make sure that you use the POV as well as you load.

  For example: If you load data into a specific POV, make sure that you view the data in the same POV. Then it will exist.

• Installing TB31.3.0 on a W8.1 workstation; I want to delete the messages on the user agent of TB, but prevent deletion on the server. Where is the switch? When to install

  Hello!

  I have already installed a TB user agent on my workstation 'primary': I can create, read, and DELETE messages ON the workstation and the server.
  I want now to install a user of TB on a "secondary" workstation agent, where I can create, read and DELETE messages on the workstation. But I don't want the secondary workstation to delete messages on the server. (In short: I want that the function "delete" ONLY allowed to my primary workstation).
  Is this possible? Where is the switch ON / OFF? (For example, this feature is available on the agent on my WindowsPhone).
  When I install it?

  Thanks for your support!
  Rgds
  Flamboyant

  Using Thunderbird on your second workstation - the only option would be to create a Pop email account
  so before you download anything, you must configure the account settings to "leave a copy on the server.

  Tools > account settings > account for Pop mail server settings.
  or
  Menu icon > Options > account settings > server settings

  • Letter: look for the e-news at startup
  • Letter: arrival of new messages every xx minutes
  • Select: automatically download new messages
  • Letter: Leave messages on the server '
  • Click OK

  E-mail POP accounts can only download the mail from the Inbox server.
  This will allow you to remove off the coast of the secondary workstation and leave it on the server.
  However, Pop cannot see or download other folders on the server: IMAP only can see other folders these are read remotely. But in IMAP because records are a same as server, removing in TB will remove also off server.

• Qosmio G30 - where is the alarm battery under Vista?

  Where is the battery alarm on vista? I really liked the toshiba power saver because she warned by a beep loud when my battery fell to 2%

  I can't install toshiba power saver because it is replaced by panoramas energy saving...

  Hello

  You cannot install the Toshiba power saver because Toshiba didn't conceive the Toshiba for Vista energy saver.
  Vista energy saver supports several options and tell the truth, the Vista energy saver looks a bit like the Toshiba power saver.
  What do you think???

  Check the control panel and power options. There are various settings that can be configured.

• Where did the "orientation Lock" parameter passed on my iPad?

  My "Lock Orientation" button disappeared in my quick settings and is now a button "Mute".  Where can I configure the direction to lock now?

  Thank you

  PMC

  Version of the IOS is 9.2.1 (13D 15)

  By "quick settings" do you say Control Center (slide up from the bottom edge of the iPad)?

  According to the model of the iPad you have a settings > General > use side adjustment switch? If you do then who controls what does the switch on the side of the iPad over the volume control (rotation lock or mute notification), with the other option being at the Control Center: on the iPad side switch - Apple Support

  If it's an iPad 2 Air, Pro or Mini 4 two functions should show in the control center

• Where is the setting to change to show when you lock shift or stopped

  Original title: caps lock display

  where is the setting to change to show when you lock shift or stopped

  Hello wgkg,

  It should be in the keyboard properties.

  1. open the control panel

  2. click on the keyboard icon

  3. in the keyboard properties, click on settings in the key

  4. scroll to the option of caps lock and highlight it.

  5. click on the button Configure (below the list of available keys options menu)

  6. in the caps lock set up a window, place a nect check mark (tick) for the "show state lock shift on the screen..." and then press the Finish button.

  You will see only the option above, if you have installed the relevant keyboard/mouse drivers. If you don't see these options, that is, the options key parameters, check with the manufacturer of your keyboard, see that you have the correct drivers and 'no' the standard Microsoft drivers generic like the one provided with windows.

  If her you've seen before a prompt on the screen for you say that the cover lock is enabled or disabled, but you don't see it now you probably disabled the option at some point in the past.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• where is the fingerprint reader for a laptop of HP TouchSmart tx2-1025dx

  where is the fingerprint reader for a notebook PC HP TouchSmart tx2-1025dx help please

  Hernandezeric2, welcome to the forum.

  Here is a guide that has a video on how to configure the fingerprint reader.  It should show you the location of the reader.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Where are the quick launch buttons?

  Hello

  I have a ProBook s 4710 and I had app called "Quick Launch Buttons" pre-installed on my computer. The thing is - where these buttons are on my laptop? There is a button next to the Start button, which launches the application quick launch buttons, but how can I configure this key for something else and where is the rest of the buttons?

  See you soon.

  Hello

  Depending on each application, some applications (games, mainly) allow you to reprogram the function keys. Alternatively, you can assign the macro to your function keys:

  http://support.Microsoft.com/kb/237179

  and you can change your keyboard layout using the following instructions:

  http://support.Microsoft.com/kb/258824

  Kind regards.

• BlackBerry Smartphones where is the stock of RIM (No Carrier) OS for Blackberry 8300?

  Every time someone asks how to reload Blackberry OS, the GET directed to this website: http://na.blackberry.com/eng/support/downloads/download_sites.jsp which contains all the operating systems for different carriers who sold blackberries. Upstairs, he says that this is for people who didn't buy their phone DIRECTLY from RIM, with no dependence of the carrier. So, where's the stock, no carrier OS if I want to reload my Blackberry that I bought from the RIM, directly and without SIM card?

  I have a Blackberry 8300, if you were wondering.

  You can use ONE of these versions of the operating system of your device, regardless of the carrier.

  Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model by following the instructions below.

  See the link below to download it and follow these simple instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml." (You might have another Vendor.xml file hiding on your computer.) Open Windows Explorer, and in organizing key (on Windows 7, there are similar tools for Vista and XP) click on 'folder and search options. On the display tab, make sure that your computer is configured to display the hidden files and folders. Once you have done this, look for your drive C:\ "Vendor.xml".)
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  * Starting with later versions of the OS6, there are now three copies of the SELLER. XML
  C:\Program Files\Fichiers Research In Motion\AppLoader (for 32-bit Windows XP/Vista/7)
  ==========OR============
  C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader (for 64-bit Windows Vista/7)
  C:\Documents and Settings\ * name * \AppData\Roaming\Research In Motion\BlackBerry\Loader XML
  C:\Documents and Settings\ * name * \Application Data\Research In Motion\BlackBerry\Loader XML
  You can also just search of the SELLER. XML. ensure that you choose the ADVANCED SEARCH and include hidden files. It should display the file in three places. Delete all copies that it finds.

  Note: Some users may be concerned they will void their warranty of device by loading an OS from another carrier. There is really nothing to fear. Please read more information about it here: http://www.port3101.org/power-users/296-blackberry-os-upgrade-including-betas-myths-dispelled.html

• where is the RADIUS/Ganymede communication that takes place

  Hello

  If iam connect to a domain and my domain name is configured for authentication to the ACS, where is the RADIUS/Ganymede communication that takes place?

  -C' is from the client to the ACS

  - or is it the domain of ACS

  client--(PAP/chap/EAP)--NAS--(RADIUS/TACACS)--ACS--ad

  Kind regards

  Prem

  Please rate if this can help!

• Where is the product key?

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

  Hello

  A question any longer, with material that could be to help others.

  My HP Pavilion (2013) brand new 23-b010ez a pre-installed MS Windows 8 version 6.2.9200.

  Comments on this page to the effect of "the old fashioned useless, full of 25-digit product key" are not correct.

  That means installed "Windows Help and Support" of my computer for example on the product key?

  I quote:

  "It's a 25 numbers used to activate Windows.

  -"the product key must be in the box that came with the Windows DVD come in French - or.

  -"[product key] should be in an e-mail that shows that you have purchased Windows."

  "It's a good idea to save a copy of your product key for your records in case you need to reinstall Windows."

  I had no system of Windows (recovery) DVD on purchase. It came pre-installed.

  I had no email with a product code. I got a confirmation of my Windows account, I was forced to sign in the first starting up my computer and a confirmation email of authorization with a verification for my Microsoft Account code.

  But no code produced by email (they wouldn't email defeats in any case - security).

  And I agree keep an external copy of the product key. Apparently (according to the "Windows Help and Support information" provided on my new computer I HAVE the product code for reinstalling Windows.)

  I found also asks me to tap into it, if I try to buy windows to another computer, or to add functionality to my edition of Windows from here: configuration\systeme and security\activation center\windows of activation using these built-in control functions. In both places, I wonder to enter the complete 25 digit product code. No other solution. Can't tell him to go find the BIOS, on the contrary!

  So far, what I've found and where?

  I tried to find the product key, without success. In "Windows Activation" to control configuration\systeme and center\windows security\activation, I found the last 5 digits (or are they the first?) and my activation date. In "System information" control configuration\systeme and security\system, less listed under the title 'Activation of Windows', I find my windows is activated and a "product ID 20 code numbers. What is the rest of the key complete product which is now part of BIOS, as shown above? It would be good to know.

  Why do I need to enter the product key?

  Well because reinstallin Windows, adding additional features (regardless of who it) and buy another copy Windows to another machine.
  So, where is the product key - or come by it?
  I don't have confidence now and seen the galley do to get under pressure once I have to do a reinstall of Windows on my new computer.
  Thank you very much.
  ARH

  Hello

  Thanks for posting the query on Microsoft Community.
  Like you said windows 8 has been preinstalled on your computer. We would like to tell you that the product key will not need to be included as it uses the product by the manufacturer key which is encrypted in BIOS.

  How to find the product key?
  

  1. open the original OEM software package; the product key will be printed on a sticker located somewhere on the case. Some software have the sticker on the back; others will have it inside the case.

  2. review the case of your computer for an OEM product label; This is common for computers produced by major retailers operating under Windows.

  3. open the manual supplied with the software; OEM key are printed on the inside cover, or inside the back cover first. Sometimes the key will be printed on a loose sheet back in the manual.

  4. communicate with the computer retailer that provided the software; retailers often keep records of keys to product belonging to their customers, in the case where the keys are lost.

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you.

• where is the synctoy?

  where is the synctoy? each MS address for the app is no this page, I need a tool to synchronize my HD to my external, thanks

  FWIW:

  Using IE11 I have no difficulty in opening http://www.microsoft.com/download/en/details.aspx?id=15155

  With the help of FF43.0.3 (my normal browser) I need to use InPrivate browsing...

  The system configuration required

  Operating system supported

  Windows 7, Windows Vista, Windows XP

  Microsoft .NET Framework 2.0
  Intel P3 1 GHz processor or equivalent
  256 MB RAM, 512 MB of RAM recommended
  20 MB of free disk space

  but I read here that it also works on Windows 10: https://social.microsoft.com/Forums/en-US/2ff94c12-7a07-4814-b156-2162580ad414/is-synctoy-21-compatible-with-windows-10?forum=synctoy

  In the case where you cannot even open the official link, try download of http://www.sevenforums.com/tutorials/278866-synctoy-backup-user-data.html

  I hope this helps.

  See you soon,.

  J