Where is the front memory card and the access drive to USB?

Similar Questions

• Has it helped you? Where can I buy memory cards

  Where can I buy memory cards.  After you download El Capito, I got nothing else problems. The photos are mixed. He runs slowly. The beachball is there more steps.

  Do you mean RAM?  It would be useful that you told us where you are located.

• Problems pictures copies of Flash memory card and USB drive under Vista 64 files

  Hi, when I insert a flash memory card (SanDisk 8 GB SDHC or SanDisk 2 GB Compact Flash) either by inserting the card into a card reader, AutoPlay comes on but the image transfer stops after a few images have been copied to any program (Windows, Picasa, etc.). I chose to copy the files. Same experience when I connect the camera with the memory card in the camera using the USB cable to the PC. I tried to re - format camera memory cards, but it has no effect.
  Also, I feel the same when I try to copy from a USB flash drive (the drive is basic, not a U3 key).
  I have a HP Pavilion m9400t Elite desktop running Vista Home Premium 64-bit. I own this desktop computer for a year and I've always had this problem. I have no problem using these flash memory cards and a USB drive on my old XP PC or an Apple Mac Book. For what I can tell, my Vista desktop is set for automatic windows and updates from HP. Everything about the plan of updating drivers, etc., which would solve this problem would be appreciated.
  Thank you
  Srini

  Hi Srini,

  one) that you get specific error messages when images are arrested to copy?

  (b) what is the file format of the pictures\files that are not copied? What images are copied with success?

  To narrow the problem, please follow the steps mentioned below:

  O copy the pictures manually on the flash memory card Office.

  O connect the flash memory card\ camera to the back of the computer (for a different USB (port universal serial bus) and try to copy the pictures\files.)

  O check if the photos are in double version:

  Windows detects your newest pictures and doesn't matter the duplicate versions of the old photos that you've already copied to your computer

   

  He may want to know:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to copy the pictures from my digital camera on computer memory card and now I can not find them, and they have all been removed from the map. What should I do?

  I inserted the memory card from my digital camera in the slot on my HP laptop.  I went into my computer and 'file' tab and press "copy".  He asked a folder name called 'Photos '.  I then went in the 'photos' file and it says it's empty.  I then inserted the memory card in my camera and were not the picture about it.  I am so upset... There are 665 photos that can never be replaced.  What should I do?

  Hello

  The operating system that you are running on your computer?

  You may have set the option "Erase after importing" when importing the photos. At the end of the import process, then pictures should appear in the Windows Photo Viewer.

  Open the Windows Photo Viewer and check if you can see these photos.

  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-digital-pictures

• I have a mac and lightroom 3.6.  Never had trouble importing photos before. I tried today to import from memory card and my computer and the icon twice 'pending' appears and the program crashes. I have to force quit out of lightroom. It is o

  I have a mac and lightroom 3.6. I have never had bad to import photos before.  Today, whenever I try to import photos from a memory card or my computer, the icon "on hold" is displayed and the program crashes.  Only way out is to force the resignations of lightroom.  How can I fix this and why this is happening?

  Only, I solved the problem... My mac has updated the day before to a version that is not compatible with my old version of lightroom.  Only way to solve this situation is to buy the upgrade.

  Thank you very much!

• Office continues to copy pictures, that I was transferred from a memory card, and now I have 18 copies of 120 photos on my desk and that you cannot delete!

  I transferred photos from a memory card on my desk but it keeps trying to make copies without end of the photographs and whenever I try to delete them, it makes more copies.  My office is invaded by the copies of copies of copies of pictures.  Help!

  Copies are displayed when you try multiple
  Select for deletion?

  Unwanted copies have file names with
  copy "prefix of"?

  Example: Copy of IMG_1455.JPG

  If_yes_maybe the following tutorial will be
  a few ideas:

  Here's how to reproduce the unwanted
  copy of...

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button.

  Ooops! More copies...

  Maybe the following will help:

  Sometimes most of the person who
  trying to select multiple by holding the CTRL
  or the SHIFT key down while clicking on the left to select the
  image files.

  Copies are created when you are unable to
  completely release the mouse button before
  you move the pointer to another file. When a group
  the selected file is dragged... even the slightest
  release the mouse button will produce a bit...
  copies of all the files previously highlighted.

  It's a little easier if you have your folder
  Options set at single click... that way you can
  select/deselect a file with just a mouse more
  and you don't have to click. For multiples you
  I have to keep... CTRL or Shift.

  Do not click on... no slip... no copy... maybe that of
  your solution. To adjust the click...
  Open a folder and go... Tools / folder
  Options / General tab... Check... 'single click '.
  To open an item"/ apply / OK.

  If you want to delete all the files in a folder
  You can try the following:

  Reach... Edition / select all... or type... CTRL / has...

  With all of the files selected... go... Drop / delete...
  or press your delete key... or... click on the
  Group and choose 'delete '.

  How do I find and remove unwanted 'copies '.
  of your image files.

  Open the folder that the images are saved in and
  on the left, click on the button 'Search' in your toolbar.

  (If you view the files from a montage
  program and do not know where the record is... right
  Click on one of the image files and the menu...
  choose... Properties. The path to the folder will be
  in the tab 'General' to 'Place').

  In the research pane select... "All files and folders".

  In the "All or part of the file name" field. Come in...

  a copy of

  Now... on the left, click on the search"" button.

  When the search is complete... go to... Edition / select all...

  Then go to... Remove / delete.

  You will see a dialog box asking if you are sure
  you want to delete the files, click Yes.

  Now... on the left, click on the 'Back' button in your toolbar.

  Now the remaining files should be your originals.

  If you delete the wrong files... recover from
  your basket now.

• Memory card and CD transfer

  I can't figure out how to transfer photos to a CD on a memory card

  Hello

  ·

  ·         Is it the first time you try to do this?

  ·         What type of files you are trying to transfer?

  ·         Have you tried to copy and you get an error message?

  There are many ways to transfer the files from device CD / removable.

  Method 1:
  (1) open your CD device / removable.

  (2) click on Edit on the top right of the window.

  (3) click on select all.

  (4) click on copy.

  (5) now move/open the location where you want to copy these files.

  (6) click on edit.

  (7) then on the dough, all files will now be copied to the location you want.

  Method 2:
  (1) open your CD device / removable.

  (2) to select all files press CTRL + A.

  (3) to copy these files, press CTRL + C.

  Let us know if this helps

  Concerning
  Anthony.

• Why Lightroom cc not by default windows 7 when I insert my memory card?  Now, I have to open LR CC first.  I used to power just put in my memory card and LR would open up.  Not now :-(

  Hello

  I installed LR CC and now it will not open when I insert my memory card.  My previous version of LR would be.  What should I do?  It's on a Windows 7 machine.

  Thank you

  In the Lightroom preferences > general tab > Import options > select 'see the import dialog when a memory card is detected. See the screen capture.

  

• E31 - 2555CGU - where is the chipset driver Windows 7 x 64?

  We use Microsoft MDT2012 update 1 to deploy our Lenovo E31, 2555CGU, workstations. I downloaded, extracted and all drivers available imported from the matrix driver Lenovo in the Out-of-Box Drivers MDT2012 folder, lke I do for all other systems we image (we have successfully copied more than 600 laptops Thinkpad E530C and E531 using this method). However, when the image is deployed to physics E31 - computer 2555CGU, the following appear in Manager of devices under 'other devices '.

  Ethernet controller

  PCI serial port

  PCI Simple Communications controller

  SM Bus controller

  (USB) Universal Serial Bus controller

  Unknown device

  I've seen similar problems before on other types of computers where the LAN, USB and other dryers do not get picked up when the driver Chipset has also not been installed.

  When I'm looking for drivers for the 2555CGU of the Thinkstation E31 in the matrix of Driver Lenovo, I don't see a listed chipset driver.

  Where can I find it?

  Thank you

  Dave

  Are you using the driver matrix?

  http://support.Lenovo.com/en_US/downloads/detail.page?&docid=HT073648

  I see the chipset drivers listed in the 5th paragraph down (AMT driver included, you need also to judge by the devices you have listed).

• where is the hard drive on my HP? Laptop

  I have a laptop HP I have just purchesed new and no manual. I can't find the hard drive. I received a titanium safety drive, but don't find any disk drive. Computer shows drive D with memory.

  Thank you

  Oh THIS kind of hard disk. No, you do not have a. You can get a DVD burner external usb for not much money. If you have another computer with a hard drive, you can copy the contents of the disc to a Titanium flash drive, with a little more effort, you can make the disc on another computer available to the Sleekbook on a network or you may download the files of titanium on the Internet and use the key on the drive they gave you when it exists.

• My Vista desktop crashed and I need to access the hard drive on USB. Permission is denied

  I have a desktop Vista raid 1 and raid system crashed.  I put a new hard drive and no Vista Recovery.  I put the old drive in an enclosed and when I try to open it, I get "you don't have permission to access this drive."  I have the passwords for the player but do not know how to access.  Any ideas?

  Hello lightly,

  Here are the steps to change the ownership and permissions:

  1. Right-click on the file or folder, click Properties, and then click the Security tab.
  2. Click Advanced, and then click the owner tab.
  3. Click Edit, and then do one of the following:

  · To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.

  
  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  4. If you want to take ownership of the contents of the folder, select the check box Replace owner of subcontainers and objects .

  5. click OKand then click Yes when you receive the following message is displayed:

  You are not allowed to read the contents of directory folder_name. Do you want to replace the the directory permissions with permissions granting you full control?

  All permissions will be replaced if you click Yes.

  Note: folder_name is the name of the folder you want to take charge.

  6. click on OKand then reapply the permissions and security settings that you want for the folder and its contents.

  Additional remarks:

  • An administrator can take ownership of any file on the computer.
  • Affecting the ownership of a file or a folder might require that raise you your permissions using user access control.

    Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Where is the graphics driver in Windows 2000 for Fusion 3.01? Stuck in VGA :(

  People

  I just upgraded from Fusion 2 to 3.

  Overall, it works well except for a Windows 2000 SP4 virtual computer. When I started it OS complained that the VMWare SVGA driver is not compatible. I thought okay - we're going to update VMWare tools. It worked too, but (as usual) I received the message at the end of installation to the effect that the graphics driver must be manually installed. Yet once I went for him... but for the life of me I can't find the CD virtual VMware. Usually it would have been in

  Program File\ VMware-VMware Tools-drivers, but all I can see are SCSI drivers...

  Any help would be most appreciated as I'm not stuck with a VGA screen! http://communities.VMware.com/message/1453346/ !!

  I dcn can't run Windows 2000 on my Mac.    But I run Win2000 VMs VMWare Server and Player.  The video driver installs normally with VMWare Tools in these cases.

  I noticed this on page 24 of the guest operating system guide:

  After you have installed VMware Tools, modify the Windows 2000 screen area to be larger than 640 x 480 pixels; If you do change it, Windows 2000 uses the standard VGA driver, and performance will suffer.

  I would say, try to uninstall tools, restart Windows, and then reinstall the tools.

• How can I transfer my digital photos on my memory card on a flash drive?

  Please tell me how to transfer digital images to the memory card from my camera on a flash drive

  Almost all devices digital camera comes with a USB adapter cable to plug into a USB port on a PC. Use the supplied cable and you should find it easy to transfer photos from the camera to your PC via Windows or software of your camera. Once that is done, use Windows Explorer to copy (drag / move) pictures from your PC to the flash player (you don't specify what type it is).

  What is the brand and model of your camera?

  Please to identify your computer.

  Ook from Lto the base/back/side of the pc/laptop to the sticker with barcode.

  Numbered headings 1 and 2 on the following example of a laptop HP barcodedimage. Your bar code may be slightly different, but will always have the necessary important imformation for us to help you.

  #Don't post not the serial number, as it is personal information. ###
  
  Display the version of the operating system installed (and whether 32 or 64 bit) and if the processor is an AMD or Intel product

  Not showing information as requested will delay our responses and troubleshooting slow the question that led you to create a thread.

  Is your laptop / PC still within its warranty period?

  Best regards

  ERICO

• computer laptop 15r-005tx: memory (ram) and storage (hard drive or replace it with SSD) upgrade.

  friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)

  edd609 wrote:
  friends pls I mean is possible to upgrade my laptop hp computer 005tx-15r laptop memory (ram)

  Hello

  Below are the specifications of your computer:

  http://support.HP.com/au-en/document/c04337709

  1. for the RAM:

  housing for module customer accessible/upgradable memory 1 or 2 (depending on model)
  2 slots: DDR3L - 1600 MHz Dual Channel Support (Core processors)
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the)(Bay Trail processors) DDR3-1333
  1 location: DDR3 1333 MHz Dual Channel Support (DDR3L-1600 demoted to the DDR3-1066)(Bay Trail processors)
  Supports dual-channel memory
  Supports up to 16 GB of RAM in the following configurations:
  ● 16384 MB total system memory (8192 × 2) or (4096 × 2) (No 32-bit OS or Windows 7 Home)
  ● total system 12288 MB memory (8192 × 4096 + 1 × 1) (not for 32-bit OS or Windows 7 Home)
  ● 8192 MB total system memory (8192 × 1.) or (4096 × (2) No 32-bit operating system)
  System memory total 6144 MB (4096 × 1 + 2 048 × 1) ● (not 32-bit operating system)
  ● System total of 4096 MB memory (4096 × 1.) or (2048 x 2)
  ● total 2048 MB system memory (2 048 × 1).

  (Your machine uses 1.7 GHz Intel Core i3-4010U with Intel HD Graphics 4400 so it has 2 slots). Please use the manual next (page 76) to the part number het to buy good RAM. The manual also shows you how add/replace RAM

  http://h10032.www1.HP.com/CTG/manual/c04409502.ppdf

  2 SSD:

  Yes, you can replace the current drive with a good brand, standard SSD for laptops and hardware wise, please use the #59 manual page to replace the HARD drive.

  The fast and easiest way is to buy with at least 512 GB SSDS, clone the SSD HARD drive and install in Bay HARD drive as shown on the #59 page.

  Kind regards.

• Equium - Windows cannot load the device driver for USB dongle

  I've been using a dongle for about a month without problems, but now it is said (in Device Manager) "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  -what it means and how can I solve this problem?

  Hi Ozcat,

  What USB dongle is that exactly?
  What cell phone do you have?
  What operating system is installed?
  Have you already tried to reinstall the driver for USB dongle?