Where is the Position of the Horizontal slider?

Similar Questions

• Can I extend the horizontal slide show in a straight line but not full page from top to bottom?

  Can I extend the horizontal slideshow in a straight line on the page from start to finish, but not full page up and down?

  Hello

  Please check these videos to help:

  https://www.YouTube.com/watch?v=BDgERSf2a5k

  https://www.YouTube.com/watch?v=diUtfwFGI1w

  Thank you

  Sanjit

• How to get the Horizontal Slider that aligned with the text?

  Hello

  I'm putting my horizontal sliders according to textual information, but for some reason that the alignmentbase property does not work. Any tips?

  The code that I use now:

  < s:Panel id = "ViewTracksPanel".

  title = "look a parameters.

  Width = '100% '.

  Height = "100%" >

  < s:layout >

  < s:VerticalLayout paddingLeft = paddingTop = "10" "10" paddingBottom = "10" / >

  < / s:layout >

  < s:VGroup >

  < s:HGroup gap = "30" >

  < s:RadioButton group = "{viewingtype}" id = "viewtrackHistory" label = 'History of Athletics' value = 'History' / >

  < s:RadioButton group = "{viewingtype}" id = "viewLatestLocation" label = "Current Position" value = "LatestLocation" / > <! - does not work because the accuracy of the data is not in line with precision of interval - >

  < / s:HGroup >

  < right s:HGroup = "40" >

  < mx:Text text = "track time interval: Minutes of {timeInt.value}" / > ""

  < s:Label text = "1" / >

  < stepSize minimum = "1" maximum = "1" s:HSlider = "60" id = "timeInt" width = "200" dataTipPrecision = '0' change = "timeInt_changeHandler (event)" alignmentBaseline = "ideographicBottom" / > "

  < s:Label text = "60" / >

  < s:Label / >

  < / s:HGroup >

  < s:HGroup >

  < mx:Text text = "display time interval: seconds {Speed.value}" / >

  < s:Label text = "1" / >

  < s:HGroup >

  < stepSize minimum = "1" maximum = "1" s:HSlider = "5" id = "Speed" width = "200" dataTipPrecision = '0' alignmentBaseline = "ideographicBottom"/ >

  < / s:HGroup >

  < s:Label text = "5" / >

  < / s:HGroup >

  < s:Label / >

  This translates into:

  

  As noted above, the cursor (& corresponding labels) aren't on the same 'line horizontal/position' as the mx Text (e.g. "Track time interval" but a little higher?

  I tried to put alignmentbaseline to all possible values but whithout success.

  Any advice would be great!

  Thank you.

  Maybe put the two HGroup form and form elements will have a height and can use verticalAlign set to medium or low, depending on what works.

• Where is the fog slider from?

  I just upgraded to Lightroom Lightroom standalone CC, mainly to get dehaze slider and other updates. But I paid, updated and bam... isn't there?

  Sign out of LR using LR - help / disconnect, then reconnect.  LR will not know that you paid to change the CC license until he phones home page.

• Horizontal slider

  I can't understand for the life of me how to operate the horizontal slider. I can make a list of data vertically, and I can do a repetitive vertical element with the vertical slider but no luck with the horizontal.

  Hey Colesmack,

  Understand and get the vertical datalist + scrollbar wired up is the first step, then you are on the right track.

  The following steps, you should get what you want:

  (1) draw a rectangle on the artboard.

  (2) select the rectangle, and then in the HUD, choose "convert work to the component... ", and then select Datalist.

  (3) notice of the yellow warning parts are missing (undefined)

  (4) click the button parts change

  (5) select the rectangle, and choose "convert work in component part..." and select the repeated item "

  (6) you should now see a vertical datalist.

  (7) in the Panel properties (lower right corner), click the "Layout" section to expand it.

  (8) here you can choose vertical, horizontal, or tile.  Select Horizontal.

  (9) so now you see what a rectangle and a few funny selection limits.

  (10) slide the right to manage most of the selection to the right.  When you release, you will see that the datalist items are now aligned horizontally.

  (11) drag a HorizontalScrollbar of 'Wired Components' Panel to the artboard.

  (12) run your project.

  You should now have a scrolling, horizontal list.

  Feel free to customize the scrolling/datalist to something more interesting!

  C, let me know if it works for you, and if that's what you're looking for.

  Tara

• Positioning of the quiz slide objects

  I'm working on a project, Captivate 5, with many slides of quiz. The questionnaire slides have implemented project by someone else. I need to move different quiz slide objects (submit button "back" button "clear" key, the question text, review area, legend of suspicion, etc.).

  These items must be moved to the same position in all the slides in the quiz. I've been moving these items in one place and it's very tedious.

  Is it possible to create a style for all these objects move on all the slides in the questionnaire at the same time?

  Each of the items you mention on the quiz slide are a special type of object in Captivate.

  So although the object Styles does not allow you to specify the coordinates X and Y of an object, you CAN simply move one of these objects on a slide where you want them all and then go to the accordion in Position and size properties (accordion in Cp5.5 Transform) tab, look for the small dropdown in the upper right the accordion and choose the option apply to all items.

  

  The name is a bit misleading because it make you believe it will actually be the adjustment of positioning of each element in the project.  But the fact is that it it will only apply to items OF THE SAME TYPE OBJECT. So well that you would never do something like text captions in the main part of your project, you can do it safely for things like Submit, Clear, back, and buttons in quiz slides because all of them are in fact totally different types of objects to the extent of the Captivate is concerned.

  Note also the possibility to apply it to all elements of the same style.  This means that you can create custom styles and apply them to only certain buttons or legends, if you wanted to only CERTAIN elements positioned in a certain way, while all the other elements should keep their original position.

• I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  I work in a sensitive project where I have a specific slide which will not move forward. I created a click box that goes to the next slide, and it remains in the same blade if it is in a loop. Very strange. What might be missing?

  You can check the Advanced Interaction Panel? You have a note attached to the interactive objects in the simulation? If so, check the desired option Quiz, more specific preferences.

• I'm looking for the option "Color fades" in the module slide show so I can fade between slides. Does anyone know where it is? Is the colour 'fades' referred to this paragraph:

  I'm looking for the option "Color fades" in the module slide show so I can fade between slides. Does anyone know where it is? Is the colour 'fades' referred to this paragraph:

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Fades chained Sets the time (in seconds) of the transition fade between slides.

  • To create a transition fade to a solid color between the slides, select the color option fades and then click the color box and choose a color from the pop-up window.

  See the page:

  https://helpx.Adobe.com/Lightroom/help/playing-exporting-slide-shows.html#set_slide_and_tr ansition_duration

  Thank you!

  The color fades color you're looking for is last in Lightroom 4.  It was abolished in LR 5 and beyond.  Adobe needs to update their help page to delete this paragraph.

  LR4 tutorial includes a color option in the playback area:

  

  LR5 tutorial does not work:

  

• CP9 sensitive project - where are the transitions between slides?

  Transitions between slides are available via the sync Panel when you create a blank project (unfounded).

  Where are the transitions between slides when you use a sensitive project? The distribution Board is not in the property inspector.

  Certainly, it is always possible to add a transition between slides for a sensitive project? If so, how?

  The slide transitions are not supported for projects of a reactive nature, they are not yet supported for the release of HTML5. The distribution panel is available (at least in the Expert user interface), you can apply a transition, but HTML5 Tracker will indicate that this is not a supported feature.

• I took a video on my Android phone that is currently playing in Windows Media Player 90 to the horizontal. on VLC player, but the image quality is very poor on this player.

  original title: video orientation

  I took a video on my Android phone that is currently playing in Windows Media Player 90 to the horizontal. I tried to watch the videos on VLC Player, but the image quality is very poor on this player. I have Windows XP Home Edition so the moviemaker product will not work. Are there other options available to get my videos to play properly?

  You can rotate the video to display in VLC media player:

  Open an it... then video and pause go to...
  Tools / effects and filters / video effects tab / geometry tab.
  Select the check box turn / slide the circle / close / play.

  If you want the video permanently turned... Movie Maker
  worth a try, but you will need to convert the video to the
  . Before importing WMV format.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• How to shorten the music file to match the selected slides

  I created a slide show with windows vista movie maker.  How to shorten the music files to match both of the selected slides.  Using the fade out option did not work

  Hello

  You can try the following methods and check if it helps.

  Method 1:

  (a) open your filmmaking program and create the slide show using your photos. Choose the options you want for changes between the photos and the duration of each photo display. If you need help, then check out the help file in your theater program.

  (b) open the import file dialog box. In Windows Movie Maker, it is in the part of '"movie tasks', section"vidéo Capture." Browse your files to find the mp3 file you want to import, select and import it. Will import it into filmmaking program but it will not in the video.

  (c) search for the file in your filmmaking program and import it into the film. In Windows Movie Maker, you can drag and drop the file in the position in the window of time movie online, where you want that song to start playing.

  (d) scroll through the timeline until the end of the song. Drag the end of the song in a position to match the end of your slide show. This will be the end of the song at the same time exactly like your slide show.

  (e) read your film completely from the beginning to the end and ensure that everything is with the song the way you want that there. If you are satisfied with the finished product, then export the movie to the right format and the file will be ready to play.

  Method 2: Work with clips in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker

  Reference:--

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker#

  http://Windows.Microsoft.com/en-us/Windows-Vista/adjusting-audio-in-Windows-Movie-Maker-frequently-asked-questions

• Slide Show does not show the #1 slide, start on #2

  After months of work, we finally got the desktop version of this fenced site. Now, we are copying the entire site to phone format, which means hours and hours of resize each part of the site.

  The home page is a slideshow simple 'Hero', with the type and links on each slide. It works great, that is, until it is moved to the site of phone.

  He began, instead of starting the slide show on slide 1, slide TWO.  :-(

  The only clue that we have as to what is apparently wrong are the triggers of Muse.

  What triggers are similar to Muse on the desktop version is:

  

  ... and this is what they look like in Muse on the version of the phone. Notice the sign "+" is now appear after the FIRST slide instead of the LAST slide.

  

  We transferred slideshows from desktop to the phone and tablet before and used exactly the same versions. If (1) WHY now, the sign '+' appears on the FIRST slide, instead the LAST of them, and (2) HOW to move to the last slide, the FIRST slide appears when the page is presented in preview or published?

  Thanks for ANY idea.

  Nevermind, it is fixed. But seriously, what HASSLE.

  The procedure we used to reorder the slides has been:

  1. move the first slide (which was now LAST) in the last position (moving the trigger)

  2. make a new slide empty by clicking the sign «+»

  3. go to the far left slide by selecting its trigger, select everything manually (piece by piece), cut all of the selected items, and then go to the last slide and glue in position.

  4. return to the first slide (now empty) and remove its trigger, which removes this slide.

  -Repeat until all the slides except the REAL everything first glide are moved - now the sign '+' is after the last slide in Muse, which is where it SHOULD be, and now the FIRST slide appears FIRST, as it should.

  Ugh.

  Still, I would like to know why this happened in the first place, since we have started with the first slide and resized elements successively, one slide at a time, in order. We have never rearranged no slides when we their copied as the composition of the version of office to the version of the phone, and we have resized each of them in order, from first to last.

  ???

• WHERE DO THE DETAILS OF MY REQUEST TO HIDE, THEY ARE NOT IN MY PREIVIOUS POST!

  on my acer laptop my cursor jumps to the bottom of the page whenever I click anywhere to highlight the text or insert the words, corrections, etc.  Help, please

  I TYPED A LOT OR A MINUTE AGO AND IT DOES NOT APPEAR IN THIS BODY FOR MY QUESTION

  SHOULD THE SOFTWARE BE SO DELAYED?  COME ON MICROSOFT - SHOW SOME PROFESSIONALISM

  Perhaps mean you the extra paragraph you posted here

  ANNOYING JUMPS AT THE BOTTOM SLIDER O R AT OTHER TIMES, JUST SOMEWHERE ELSE, UPWARDS, DOWNWARDS - WHERE EVER!

• Is it possible to manage more finely the seek slider bar in Windows Media Player?

  I cannot using the seek slider bar in Windows Media Player with the arrow keys.  Is it possible to manage more precisely where the cursor is moved using the keyboard?  Now, to jump back and forth when I use the arrow keys.

  Thank you!

  I cannot using the seek slider bar in Windows Media Player with the arrow keys.  Is it possible to manage more precisely where the cursor is moved using the keyboard?  Now, to jump back and forth when I use the arrow keys.

  Thank you!

  CTRL + right arrow	Next playlist in the playlist history	Focus not on the search bar
  CTRL + left arrow	Previous playlist in the playlist history	Focus not on the search bar
  CTRL + right arrow	Jump forward (large increment)	Focus on the search bar
  CTRL + left arrow	Jump backward (large increment)	Focus on the search bar
  Shift + right arrow	Jump forward (small increment)	Focus on the search bar
  Shift + left arrow	Jump backward (small increment)	Focus on the search bar
  Right arrow key	Jump forward	Focus on the search bar
  Left arrow	Jump backward	Focus on the search bar

• Where is the battery compatment on MS wireless mouse?

  Where is the battery compatment on MS wireless mouse? I removed the top cover (Nothing) nd low seem to flush of mouse body, perhaps part of the mold?

  Thank you

  Tony

  What model?

  They differ. On one of mine, a MS mouse, there is a slightly recessed button with Open impressed in it. Press it firmly, a small part of the back ejects. You enter that and outword traction and a sled emerges which contains a single AA battery. On the other, a creation of Logitech, there is a blade spring on the bottom Board, under which you want to slide forward. A piece of the upper shell falls revealing a compartment holding two AA batteries.

  Good hunting.

  Tom Ferguson