Where to put the Sim Card in the Tecra M9-169

Similar Questions

• I have an iPad without any place to put a Sim Card.But I just updated my iPhone IOS 9.3 5 and before the full update there don't say "SIM necessary." Like I said my iPad has no where to put a SIM card on it what should I do?

  I have an iPad that has no place to put a SIM card on it.but I just updated my iPhone 5 in IOS 9.3, but before the end of the update there is a stage says "SIM card required" so I put a SIM card to this topic, but how do I update my iPad to IOS 9.3? Please help I'm really scared of what will happen!

  Only your iPhone needs a SIM card to do the upgrade, you will not be asked this question when you update your iPad unless it's an iPad GSM. I wouldn't do the update again as IOS 9.3 has serious bug (s) to fix first.

• I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get i

  I bought a brand new iPhone 5 s to the United Kingdom for use in New Zealand. When I'm in New Zealand and put the card sim inside (put a sim card in the first time), he said that it is not supported and it doesn't let me do anything else - cant even get into the phone. Why has this happened?

  The United Kingdom, where did buy you it?

• Where to put the IP lease expires?

  I would like to know on where to put the IP Address of the lease, which is currently 30 minutes

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  Lease obtained... April 1, 2014 12:29
  End of the lease. April 1, 2014 12:59 AM

  Image
  http://I1093.Photobucket.com/albums/...ps367c6819.jpg

  In your router.  Like this:

  

• WRT120N - impossible to find where to put the DNS I want to use

  I bought a WRT120N to replace a Netgear, I had.

  I can't find in the management console where to put the DNS servers, I want to use.

  Can someone give me please the exploration to find.

  If you want to configure a static DNS on your router, and then connect to the Setup page of your router and on the tab of configuration below, you will find static DNS1 and DNS2 DNS3. For example, you can configure a static dns on your router.

• DirectX June 2010 asking where to put the extracted files. Where should I put them?

  DirectX June 2010 asking where to put the extracted files. Where should I put them?

  Create a new folder and extract the files to the new folder.

  Let us know if that helps.

• Where to put the password, the application running in FB4?

  Im trying to follow this tutorial: debug your application Adobe Flash Builder 4.0

  and get an error:

  Deployment failed: 1
  Error: Authentication failed because of an invalid password.

  OK, but where to put the password if testing my application in FB 4.0.1?

  There is no info about it in the tutorial and no password field in the FB4 debug configuration

  In the second screenshot, below "debug host ip", you should be able to enter your password

• Where to put the report server ip and port for the Siebel server?

  Hello

  Where to put the report server ip and port for the Siebel server? I have checked the document "Reports Siebel Guide" but does not know where is the configuration section ' ip address of the server and port ' for 'Oracle BI Publisher.

  Note: I have installed BI Publisher, now necessary to define the ip editor and siebel server port.

  Please help, thanks.

  Hello

  Communication between Siebel and BEEP coming through webservices. You must set the Siebel Outboundwebservice 'PublicReportService' address to address BI Publisher.

  Similarly, the address of the webservice Siebel Inbound 'BIPSiebelSecurityWS' will be used by BEEP setting under the security model of Siebel - Siebel end Webservice poin of connecting to Siebel EAI, data inorder of success authenticate the Siebel user to perform the tasks of report being initiate Siebel UI.

  Please go through the integration document attached to the thread "Re: ADVISE WEBCAST: BI Publisher 11g Configuration with Siebel", it is any integration Siebel with BEEP 11g steps. " But if you go through each step, there are details about why we do it. Through this way you can better understand the integration.

  I hope this helps.

  Thank you
  Maria

• Where to put the cache of catalogue/cr in my configuration

  Where to put the cache of catalogue/cr for best results

  Parameters:

  Execution of lr 5 on Hi-spec laptop, catalog of 20 k cr2 files

  2 TB 7200 RPM disk internal w/photos

  m.2 128 GB SSD - average reader system

  good (also internal), 500 GB - m.2 - SSD drive, new EVO secondary

  All have 20% + free

  Thanks for any advice.

  Normally, a cache system works best when it is on another drive of source files. This means that you would normally like the LR catalog + cache on a separate disk from the original images.

  I put the pictures on the 2 TB drive.

  The 500 GB SSD seems to be a reasonable place for the catalogue and the cache, but I don't know enough about SSDS to talk about the frequent updates of file that will happen with the catalogue.

• Hello, I got a serial number for adobe package I installed 3/4 years ago, but I don't know where I put the serial number and now I need it! Is anyway to find the series through the application code? Thank you!

  Hello, I got a serial number for adobe package I installed 3/4 years ago, but I don't know where I put the serial number and now I need it! Is anyway to find the series through the application code? Thank you!

  If it's a Windows machine, and then try running Belarc Advisor

  http://www.Belarc.com/free_download.html

  For a Mac, you can try:

  https://Mac-product-key-Finder.com/

  Find the serial number of your Adobe product quickly

• Where to put the delay to show/hide code?

  Hi all.

  How can we?

  I have an item I want to delay when masking, I found a few

  things about that though, I'm having trouble finding where to put the code?

  Here is the script below without the delay. Where I would put the delay code?

  Everything I have tried does not work. He always "presents" the item but without any delay.

  sym.getComposition () .getStage ().getSymbol("Console_Content").getSymbol("console_text"). $("cons_select_text") () .show;

  Any help would be great!

  Thank you

  Hello

  This code does not work: sym.getComposition () .getStage ().getSymbol("Console_Content").getSymbol("console_text"). $("cons_select_text") .delay (1500) .show (1);

  You can use setTimeout or setInterval: Object Window

  delay() function {sym.getComposition () .getStage (.getSymbol("Console_Content")..getSymbol("console_text") $("cons_select_text")) .show ();}

  setTimeout (delay, 1500);

• RosettaNet: Where to put the time to perform?

  Repost as a new thread:
  Hello
  
  I'll put 'Perform time = 1440' in my Collaboration of 3-4 but still my 3A 4 request to have expired after 2 hours. In this case, the accused happens instantly.
  
  I think that the field "Time" does not effect at all.
  
  I want that
  
  1. the application must expire after 2 hours, if it's in the ack State wait much longer and
  2. an application must expire after 1 day, if the corresponding response (Confirmation of the isozyme 3-4) does not appear in the time of 1 day (1440 minutes).
  
  Can you please suggest the configuration required for this change?
  
  Anuj has answered this question in an old thread,
  Where to put the time to perform?
  but it seems to be for 10g b2b.
  
  My question is how to define this value in 11g b2b?

  1. the application must expire after 2 hours, if it's in the ack State wait much longer and

  Under your remote TP channel channel attributes, set the interval to retry as 120 and Retry Count Zero. Your request will remain in State MSG_WAIT_ACK for 120 minutes and then it will error (if the acknowledgement is not received at that time)

  2. an application must expire after 1 day, if the corresponding response (Confirmation of the isozyme 3-4) does not appear in the time of 1 day (1440 minutes).

  Time to perform is not supported in B2B 11 g from now on. Log an SR with plug in charge if you need this feature to 11g. As a solution, you can manage the SLA to backend.

  Kind regards
  Anuj

• Where to put the java code - best practices

  Hello. I work with the Jdeveloper 11.2.2. I'm trying to understand the best practices for where to put the code. After reviewing the http://docs.oracle.com/cd/E26098_01/web.1112/e16182.pdf, it seemed that request module was the preferred location (although many examples in the pdf file reside in the main methods). After some time of coding, if, I noticed that there was a certain libraries imported and wondered if this would impact performance.
  
  I looked at the articles published on the forum, in particular Re: programmatically access the method of service (customer interface) . This link mentions for access to the code a bean of support - and the bulk of the recommendations seem to be using the data control to drag to the Joint Strike Fighter, or use the links to access code.
  
  My interest lies in where to put the java code in the first place; In the view object, entity object, and... other Am, backing bean object?
  
  I can describe several guess better know where to put the code and the advantages and disadvantages:
  
  1. in the application module
  Benefits: Central location for code makes development and support easier as there are not multiple access points. Kinda like a data control centralizes the services, the module of the application can act as a conduit for the different parts of the code you have in your model objects.
  Cons: Everything in one place means that the module of the application becomes bloated. I don't know how the memory works in java - if the app module has tons of different libraries are all called when even a method of re - run a simple query is called? Memory of pigs?
  
  2. write the code in the objects it affects. If you write code that accesses a view object, write it to a display object. Then make it visible for the customer.
  benefits: the code is accessible through ducts less (for example, I expect that if you call the module from the application of a JSF backing bean, then the module of the application calls the view object, you have three different pieces of code-)
  CONT: the code gets spread, more difficult to locate etc.
  
  I would greatly appreciate your thought on the issue.
  
  
  Kind regards
  Stuart
  
  Published by: Stuart Fleming on May 20, 2012 05:25
  
  Published by: Stuart Fleming on May 20, 2012 05:27

  First point here is when you say 'where to put the code of java' and you're referring to ADF BC, the point is that you put 'code of java business logic' in the ADF business components. Of course it is very good to have the Java code in the ViewController layer that covers the user interface layer. Just don't put the business logic in the user interface layer and don't put no logical user interface in the model layer. In your 2 examples you seem to consider the ADF BC layer only, so I'll assume that you're not only serious logic java code.

  Meanwhile, I'm not keen on best practices in the term that people are following best practices without thinking, usually best practices come with conditions and forget to apply. Fortunately you do not here that you have thought through the pros and cons of each (nice work).

  Anyway, back on topic and turn off my soap box, regarding where to put your code, my thoughts:

  (1) If you have only 1 or 2 methods set in the AppModuleImpl

  (2) If you have hundreds of methods, or there is that a chance #1 above will turn into #2, divide the code between the AppModuleImpl, the ViewImpl and the ViewRowImpls. Why? Because your AM will become overloaded with hundreds of methods making it unreadable. Put the code where it should logically go instead. Methods that operate on a specific line of VO Approfondissez partner ViewRowImpl, methods that work across lines in a VO enter the ViewImpl and methods that work throughout your in the associated AppModuleImpl.

  To be honest that you never the option you choose, one thing I recommend as a best practice is to be consistent and document standard so not know your other programmers.

  BTW, it is not a question about loading a lot of libraries/imports in a class, it has no performance cost. However if your methods require a lot of class variables, then yes there will be a memory of the costs.

  On a side note, if you are interested in more ideas on how to create ADF applications properly think about joining the EMG "ADF", a forum which deals with ADF architecture, best practices (cough), deployment architectures free online and more.

  Kind regards

  CM.

• Where to put the script?

  I'm a bit confused on where to put the script so we are quite sure, he will be executed.

  It is my observation that my script should be in the same framework for action takes place. I can't have it just in the 1st frame (like people) and hope that it work. For example, a script runs at the start of my menu frame 1. If I move the start menu in frame 5, the script stops working until I have move the script box 5 in the same layer of the menu.

  The script does not work after that you have a keyframe. It is not postponed, correct?

  What are the General rules on set scripts to?

  Thanks for your suggestions,

  ActionScript executes as soon as the playhead passes the frame that contains the script.  If you have actionscript on frame 1 that references objects which do not exist until the frame 5, the script is still running, but because your code refers to undefined objects, those intended objects will not be affected by the script.

  running ActionScript remains in force for as long as your swf file remains open or until another script removes, replaces or it nulls.

• iPhone SEHow should I put my sim card in my new iPhone SE?

  How can I put my sim card into my new iPhone SE?

  < re-titled by host >

  Hello, Jamesblog!

  Thank you for joining the communities Support from Apple! Looks like you're need to insert a SIM card of nano in the iPhone OS. I know how it is important to be able to insert the SIM card to activate the iPhone as well. Read this article here that indicate you how remove or change the SIM in your iPhone or iPad.

  Even if the IS not specifically listed, it's the same steps as indicated for models of iPhone with the map on the side.

  See you soon!

• Separate menu Widget, but where to put the pages in the plan?

  Hello. I do a portfolio site and I have a number of galleries throughout my top-level pages. I inserted a menu widget for the buttons. I don't want my comments and Contact buttons to be grouped with the buttons of the Gallery, so I made a separate widget for my pages about and Contact, manual setting, on my master page.

  I can't know where in the tree view of the plan to put the words and Contact pages. When I put them on the pages of top level with the rest of my galleries, they appear in the menu of galleries, which is not where I want that they. I want them to be separated away keys the buttons of the gallery. If I put the words and Contact as children at my other top-level pages, then they will appear in a dropdown menu when you click on one of the galleries in the menu. Does anyone know where exactly in tree plan the Contact and remarks would go? Thank you.

  Place the pages where you want, right click on them to outline view and exclude them from the menu.

  Place a second, menu manual and use the command "hyperlink" to integrate the elements you want.