Why do I get "unable to browse the OPC server on the selected machine. -2147024891 error in GetOPCServerList.vi"trying to connect to a remote OPC Server?

Similar Questions

• Impossible to get hardware information for the selected machine error

  Ok. I tried every version 4 (standalone) converter. XX to 5.0 with the same result. what I want to do is to convert a Win 2 k 8 R2 x 64 VMS residing on one of our ESXi servers.

  all I get is "[07240 error"wizardController"] can not query info source HW: vmodl.fault.SystemError" in the journal mistletoe converter.

  I tried all the stuff I found on the forums (cloning the VM, clean shutdown, change the version of the guest operating system,...) does not. I simply can't converter to work, regardless of the version.

  any ideas?

  Thank you

  Tom

  Is the ds3@vmdk03of your data store name? If Yes, try to remove ' @' data store name, and then the conversion.

• Booklet 70CT: unable to browse the network

  I'm trying to connect my booklet 70CT to an existing LAN. I use a Fast Ethernet Linksys PC card in the booklet, connect a Linksys Wireless-G Broadband Router on a LAN port.

  There are two other computers connected to the router network OK. I did all the installation procedures in the manual of the PC card and everything seemed to be working normally.

  When I double click on network neighborhood on the booklet, I get a screen with "Entire network" in this topic. When I double-click it, I have a sign saying "Unable to browse the network."

  Help, please.
  Frank

  Hello

  I searched on the Microsoft Web site to some proposals of solution and found this:
  Unable to browse the network"when you click Network Neighborhood
  http://support.Microsoft.com/kb/260214

  This problem may occur if there is a key to logon automatically in the registry at the following location:
  EntVersion entVersion\Network\Real Mode Net

  It seems that you can solve this problem by deleting the registry location AutoLogon value listed in the section "Cause".

  Also check this:
  Network error (1222): unable to browse the network
  http://support.Microsoft.com/kb/170336

  Good luck

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• I was unable to download the free trial version Acrobat Pro DC.  Tried on two different computers - Mac.  Message says cannot download.  What do you do to get the program to download?

  I was unable to download the free trial version Acrobat Pro DC.  Tried on two different computers - Mac.  Message says cannot download.  What do you do to get the program to download?

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

  3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
  I'd appreciate any help you can provide.

  original title: unable to browse the network.

  All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

  Pls check your computers under workinggroup (domain name)

  Check if your firewall is not blocking.

• I have discs for CS6 and do not want to join cloud. I'm already registered. Why do I get invited to enter the serial number?

  I have discs for CS6 and do not want to join cloud. I'm already registered. Why do I get invited to enter the serial number?

  Hi, Jeff. I just typed in my serial number and was able to open my applications.

  Thank you

  Anthony

• «When updating I get «unable to extract the downloaded...»» U44M11210 ".

  «When updating I get «unable to extract the downloaded...»» U44M11210 ". WINS server 201 2R2

  To update previously - but recent updates to Flash after effects CC, first InDEsign and prelude show this message

  See the following topics

  U44M1I210 - creative cloud help / error U44M1I210 | Install the updates:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html

• Unable to start the virtual machine after restoration

  Guests including Test host: ESXi 5.1.0.1065491

  Vm problem: 32-bit, Server 2003

  I use Veeam Backup & Restore 6.5 to back up my vm.  I always do a test restore to ensure that my backups are good.  I'm having a problem with a restore.  The 32-bit Server 2003 vm starts just fine on the main host it runs on.  All the vm are 64-bit except for one who is a 32-bit Server 2003 vm.  Restoring the machine virtual and implemented on a host except the 32-Bit vm Server 2003 test.  After restoration and trying power to the top, I get the following error:

  Unable to start the virtual machine.

  Turn on VPCM module has failed.

  Viewed performance counters require version 3 or greater of architectural performance monitoring.

  Anyone know if there is a fix for this problem?

  TIA,

  Mux

  I assume you are using different hardware (CPUs, the BIOS settings) for VMS restored!

  The virtual machine has VPCM enabled, which causes the problem. You can either disable it in vSphere Web Client (you can do this in the vSphere Client Windows), or directly modify the .vmx VM by setting vpmc.enable to "FALSE".

  For how toggle this setting in the Web Client see allow virtual in the Web Client vSphere CPU Performance counters. If you want to edit the .vmx file manually, you need to delete/re-add the VM from the inventory or recharge (see http://kb.vmware.com/kb/1026043)

  André

• Unable to start the virtual machine after Migration - ESXi hosts

  Last night I wanted to move a virtual machine to a host of test to a production cluster.  All hosts (test and production) have shared access to the same LUN, so I usually am able to simply remove the virtual machines of the inventory in the test environment and add them to the production environment by accessing the .vmx on the data store file.  Two of the 3 hosts migrate perfectly and are running in the production environment.  However, the third server, while the migration starts.

  First he gave me errors that it was missing some files.  The only thing I did was different to rename the folder for the virtual machine on the data store.  It was called 'New Virtual Machine' for a reason, so I renamed it to "Antivirus."  However, something strange happened.  Instead of renaming the folder, it seems was created a new folder named "Antivirus" and the old folder 'New Virtual Machine' was still there.  In addition, the renamed folder 'Antivirus' had only SOME of the files needed.  So I just copied from the old folder in the folder "Antivirus" and he hung up the virtual disk of 20 GB file.  So I closed the VI client and checked the vdmk 20 GB folder and back this morning is in the folder with other files.  However, when I try to start the virtual machine, I get the "cannot access a file because it is locked" error message.

  I've done some detective and I noticed that in my second datastore where was the other folder vdmk, the file was now .40kB in size.  Looks like I've lost my other vdmk folder.  What happens here?

  It looks that the virtual machine was still running when you tried to change the name, so the old folder could not be renamed because of the lock. That's why a new folder has been created instead, and why your vm hung on the vmdk file until the lock has been released. Don't know what happened to the 2nd vmdk file, but the file vmware.log in virtual machine directory must have some info as to why does not start the virtual machine. If the 2nd vmdk is gone, this might be a reason.

  -KjB

  VMware vExpert

  Post edited by: kjb007: changed vm in vmdk

• Error 1003: I get this error when you try to connect to a Web site. I have revived the iPad and was able to do, however, when I left the game I got error 1003. I tried

  Error 1003: I get this error code when I try to connect to a Web site. I have revived the iPad and was able to do, however, when I left the game I got error 1003. I tried to reconnect and automatically received this error message. This happens with all browsers on my iPad. I deleted the cookies, cache, etc, it may not always connect. Help, please.

  You can try this by using a different connection? If possible cell or another location of WiFi?

  If it goes with several browsers - it's probably your network

• Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Hello

  Thanks for posting your question in the Microsoft community.

  I understand that when you try to connect to the Internet, he says at the outset that Internet is not responding and then after some time to connect. Let us know if this is incorrect.

  It would help if you could answer these questions.

  a. what version of Windows is installed on the computer?

  b. don't you make changes to the computer before the show?

  I suggest you check out the link and follow the steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-GB/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if you need more assistance.

• I get the following error when I am trying to connect to a network by using different credentials. 1219 system error has occurred.

  Multiple connections to a server or resource shared by the same user

  I get the following error when I am trying to connect to a network by using different credentials.

  1219 system error has occurred.

  Multiple connections to a server or a shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again...

  I don't want to use the IP address. and I don't want to delete all connections using the net use * / delete command.

  Kindly give me the solution as I am now frustrated with this issue.

  Kind regards

  Sajid

  Hello

  ·         Have you tried to access the files that were on Skydrive?

  ·         Did someone else uses your computer?

  From now on, I suggest you try the steps mentioned in the article below.

  Error message when you use user credentials to connect to a network from a Windows computer: "the specified network folder is currently mapped using a different username and password.

  http://support.Microsoft.com/kb/938120

  You can also ask your question in the forum of the Tech Net Windows Server using best.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope this information is helpful and let me know if you need additional assistance.

• Unable to add the virtual machine to inventory

  Unable to add the virtual machine to inventory

  Hi assane, is vmware-cmd same available on ESXi 5.0 and later versions?

  To the OP:

  If you use 5.0 or later ESXi, vmware-cmd will not work. Alternatively, you can use:

  Vim - cmd solo/registervm /vmfs/volumes/datastore_name/VM_directory/VM_name.vmx

  That said, it could be several reasons of failure regarding the registration of the VM. Can put you up a screenshot of the error / symptom you see when it breaks down?

• Error: "Windows cannot install to the selected location. Error: 0 x 80300001. »

  When I try to install Windows 7 on my Toshiba computer formatted I get this error message after trying to install the RAID driver during the installation process:

  "Windows cannot install to the selected location. "Error: 0 x 80300001.

  I'm unable to proceed with the installation. Can someone please?

  Hi Jon,

  This error can occur during a clean Windows 7 install the operating system installation media is not in the drive. This happens usually when a user is necessary for the exchange of discs in order to install the necessary drivers on the system and the operating system disks were not placed in the drive before proceeding with the installation.

  The error would not occur if the Setup program has been started using a USB key as stable media would not be switched.
   
  The solution would be to change the driver CD or DVD of Windows 7 install DVD media when this happens, then we can continue with the installation of Windows 7. In this particular case, it is likely that the RAID driver disk has been left in the drive.

  Note: This problem/error appeared less in Windows Vista since a message asking to specify the installation media usually as follows:

  "Please insert the disc 1 installation of Windows.

  Dan