Which Codec to use for editing?

Similar Questions

• Should which codec I use to edit HD images in Premiere Pro?

  I'm shooting with a NXCAM Sony giving me AVCHD. MTS files. I am an old user FCP go to Premiere Pro. I used to transcode videos for Apple Pro Res 422 and most of my sequences is now in this codec. I know that Premiere Pro accepts all the codecs, but I need of offline my images using the project manager. Can you tell me which is the best codec in Premiere pro to edit and transcode clips to now? The only one I see this kind of matches is AVC INTRA - I 100.

  Thanks for your suggestions,

  Adam

  Edit in the codec that you shot (source file) is a good practice

  A clip, drag the ICON of the NEW (at the bottom of the project window) and the BODY will meet a sequence.

  Good starting point.

• Should which driver I use for Windows XP on Portege R500 by WLan

  Because I couldn't get the wireless Lan driver, Intel, 11.1.0.100 references driver Toshiba download site (I'm redirected to a link that does not work), I went on the site: http://aps2.toshiba-tro.de/wlan/. Information about the two sites, all two of Toshiba, are contradictory:

  A site lists 11.1.0.100 references as driver for Windows XP, the other site of the 11.1.0.100 references as the driver for Vista 64 and the 11.1.1.16 as driver for Windows XP. Which should I use for Windows XP on Portege R500?

  Sorry my friend but after reading your question, I can just laugh. Use simply listed http://aps2.toshiba-tro.de/wlan/?page=downloads driver, install it and enjoy your life.

• We can share with the Community (related to oracle) document which can be useful for someone... ?

  Dear all,

  We can share with the Community (related to oracle) document which can be useful for someone... ? Is there a specific place, so that it... where, once that we download... our document is checked and published if it is deemed sufficiently credible... ?

  Thank you and best regards,

  Séverine Suresh

  Question has now moved to the space of the feedback from the community.

  The community provides for the possibility for members to upload documents to the content-> spaces of Documents in the workspace of each product (if available).  However, the feature is currently disabled for most members due to problems with spam, so only a few members (most of Oracle employees) have the necessary permissions to do this.

  The admin studying how they can implement something that would allow members to upload documents, etc., which also has some mechanism to prevent spam.

  There is an idea already created for this: allow users to create community Documents

  for the Admin provided details on their current attitude

• which application to use to edit PDFS?

  Which application to use to edit PDFs

  Plans and prices. Adobe Acrobat DC

• What type of file to use for editing

  Recently, I filmed a school show to create DVDs for parents. I use 9 before editing. I understand that the output for the film should be MPEG2 for DVD. We used three different cameras (I know it's a bad thing to do with before), but we used what we have available. However, we used a Hero2 GoPro mounted on the piano to give a unique perspective. Therefore, I need to convert the video files to a common format for editing. Y at - it a 'best' file format to edit or y at - it a file format which is easier to work with Premiere Elements while maintaining the best quality for the DVD release?

  Here's what we used:

  1 camera (with the audio track of the soundcard) was a Canon Vixia HF300. It has exported to the dreaded .mts format (half of the show to 24mbps) and the other half to 17mbps

  2 camera was a Nikon 5100 files .mov, 1920 x 1080, H.264, linear PCM, Total 19 k sampling rate

  Camera 3 was a GoPro Hero saved 2 .mp4 1280 x 780 H.264 Total bit rate 15 k

  As the proportions are not equivalent, I intend using black bars as opposed to culture.

  I'm editting on a MacBookPro Apple 2.66 GHz Intel Core 2 Duo with 8 GB of RAM running OS x 10.7

  Also, should I use Quicktime to convert these files in the common format I choose? Ironically, all these images can be changed in iMovie, iMovie is horrible for several cameras.

  Thank you

  Ed

  I thought I would answer back with the final result. It always bothers me when people say how they have solved a problem.

  Unfortunately, this question consumed too much time. I hunt around and try all these converters shareware without result. On a lark, I tried the demo version of Final Cut Pro X, after all, I tried everthing else. FCP X imported not only all files without problem, but it modifies them without having to convert them into a common format. The time saved will easily cover the price tag of $300.

  I admit it, I was pushing the limitations of the pre 9 using different files for the same multicam project formats. Probably should have started with FCP since the beginning.

  Thanks again for your help!

• How can I me thunderbird to show me which passwords he uses for my email accounts?

  I use Ubuntu 14.04 and Thunderbird, and I need to find a way to get Thunderbird to show me what password he uses for each of my email accounts - and how I can change these passwords without deleting the old account and setting up new ones.

  I have similar responses to similar problems, but these require I'll under "Tools" - "options" - and more far away, but I can't find any menu 'Options' anywhere in my version of Thunderbird. However, this shows me that this information must be able to access it somehow, also in my version.

  Any help would be appreciated.

  Yes available menus and commands in the Windows of Thunderbird version is different from the version of Linux, I don't know why.
  I've got Xubuntu 14.04 so I guess that my version is the same as yours. See the Edit > preferences > Security > passwords > passwords saved.

• Which DLL to use for the use of NOR-PCI-6703? (nicaiu.dll or nidaq32.dll)

  Hello! I'm programming ATEasy (from Geotest Inc.). I have to incorporate a Council OR-PCI-6703 and I need the driver for it. I do not know what .dll file to use: nicaiu.dll or nidaq32.dll. What is the difference between these 2 files? What is the best for me to use? Please help me!

  It depends on if you use the traditional DAQ driver or the driver DAQmx. If you use the DAQmx driver you want to use the nicaiu.dll. This link will explain the necessary information to be able to use for your application.

  David has.

• Which card to use for the backup of Win8

  Windows 8 requires a minimum of 32 GB card to use for the backup. I bought a PNY 32 GB (http://www3.pny.com/32GB-Pro-Elite-Series-Hi-Speed-SDHC-Class-10-UHS-1---35MBs-233X-P3122C442.aspx ), but it wouldn't work. Even though it says 32 GB it is actually a little less. If I buy a 32 GB SanDisk will, that I meet the same problem? Exactly what the size is a SanDisk 32 GB card? (http://www.sandisk.com/products/memory-cards/sd/standard-class4/?capacity=32GB)

  Thank you

  Ed P2

  any card 32 GB will be less than 32GB after it is formatted to be used in a computer. It is a standard for all types of storage.

  If you need 32 GB of actual useful storage space, you will have to get a 64 GB card.

• What is the best intermediate codec should I use for editing in Premiere Pro CS6

  I am a photographer at video edting and unfamiliar with codecs. I work with video Time lapse 1920x1080p generated by Lightroom 4 through LRTimelapse, which uses the H.264 mp4 codec.  My video clip features movements of a camera bump that has stabilized through Warp, but there also slowed a little need to reach a specific length. String and time remapping can be done on the same sequence, so I think I need to export the clip stabilized string in an intermediate file, re - import in to the body and then slow down the clip. I tried MXF OP1a: class AVC-Intra 100 1080. Video re-imported mxf blurs when previewing, but is strong when the clip is stopped.

  1. What is the best intermediate codec for further editing?

  2. is it important what order are stabilizing Warp and time remapping?

  3 or is there a better way to stabilize AND slow down a clip?

  System

  iMac 27 i7 2.8 GHz quadruple-heart, Os X 10.8.2

  You don't need to export to an intermediate file.

  Add timeremapping, right-click on the clip and the nest, and then adds the string.

• Which codec to use to render the project HD to reopen and then re-edit

  I'm new to hd video so please forgive some of my questions.

  I mainly large projects such as the conventions of weddings etc. Usually, I give my projects in 2 parts and I then re - edit the last half and join them and finish my project.

  My question is what codec I make parts of my project to bring back in a clip to associate myself with the second half.

  Joan

  Joan,

  Yes you can just like with SD material, but I repeat: all made, export and import it back causes a loss of generation, which you want to avoid at all costs.

• Which editor is used for Pro * C?

  Hi all
  I'm a developer Oracle with strong PL/SQL experience. I want to learn Pro * C.
  I looked for the Pro * C editor but could find none.
  I have the database to Oracle 10 g Rel 2 on my PC at home. I also installed customer Oracle 10 g Rel 2.
  (1) the editor is used to write programs in Pro * C? I don't have Microsoft Visual C++ on my PC at home.
  (2) out of Pro * C and Pro * C ++, which is better? that one is more commonly used?
  (3) can someone give me some tips on learning Pro * C?
  
  Thank you!
  Yogini

  Hi Marc,

  Or do I have another option?

  You can use the Instant Client 11.1.0.7 to connect to a database of 10.2.0.x. In my blog, I have connected to a database to Oracle 10 g Express Edition database. You may need to define the system path, etc. to move things in the proper order if this is all on the same machine, but do not too much work.

  Kind regards

  Mark

• Which driver to use for Satellite A300 - last, by date or version?

  For my laptop (A300-1HV) I'm looking for drivers downloads.

  There are a lot of drivers that have a date LATER change of date, but the LOWER version number.
  Or if you wish, an EARLIER date change date and SUPERIOR version number.

  How do I decide which is the updated driver?

  Thank you.

  How long you use your laptop?
  You have problems with it?
  Is there a reason for update or you do not have the best thing to do?

  Maybe that sounds stupid but I'd like to know why you need it.

• Best Codec to use for the imported feature of SnagIt 7.1

  Hello

  My company is running an archaic version of SnagIt and I have some AVI export options. I was wondering who would be the best for AE 2014?

  • Microsoft video 1
  • Radius Cinepak codec
  • Intel IYUV codec
  • Full images (uncompressed)

  Wouldn't be better to capture complete frames and then encode it to something else? I tend to use image sequences so not sure what format of file AE prefer and runs more smooth with...

  OK... so that software must be really archaic, if that's all what you can work with. You can forget Cinepak and Microsoft video 1 - both are lossy codecs, old and low quality. IYUV codec is not ideal and also older compressor, but it's still ok, and it's more or less lossless so will give you good better than cinepak or MV1 and file size smaller than Full Frame.
  Then... If you cannot install and use anything else (f.eg. lagarith) try to use IYUV codec - it should work ok for you... If not - use uncopressed.

• Workstation 10: Configure which network to use for NAT

  I have a computer with three different networks altogether. My virtual machine (host and guest two Windows 7) connects to two of them through bridged networks that works very well. Now I want to connect to the third party network using NAT because I can't use bridged networking for technical reasons. I should mention that one of the bridged networks also has a default gateway. In the three networks I'm static IP assignment, the DHCP server is disabled.

  Unfortunately, it does not work. Can I have two working options:

  1 network 1 and 2 (those jumpered) work and I can ping all devices on these networks. Network 3 I can't ping anything or only the host computer.

  2. 1 (bridged with default gateway) network doesn't work, network 2 (packed without default gateway), and 3 the work of the network.

  I can switch between these two options by running the diagnostic tool network for one who does not. Windows does not give me any feedback it does and I can not see obvious differences in network settings, so I can't say. What I noticed though is the following: when I work with option 1 and try to ping a device for which I have to go to the default gateway, it is not actually use the default gateway in the virtual machine. Instead, by using the tracert command, I can see that the VM first goes on the NAT gateway to the host and the host on the default gateway to the desired address.

  So I guess the problem is that my computer (or virtual machine) does not know which of the three networks on the host, it should use.

  All solutions?

  In post work, networked bridged can connect to an individual a physical card, while networking NAT do not support this specific connection. I guess you can try to set your host routing table and your network third at the first entrance to the host routing table