which processors can take a motherboard supported very 4101p (494035-001) jal50 used on compaq presario cq40?

Similar Questions

• I have Compaq presario cq40 & I can't find a unknown hit-and-run driver in my notebook.

  I have Compaq presario cq40 & I can not install the Bluetooth driver and an unknown device without driver, I tried to update it on the MS site & but displays error cannot find drivers pls contact your manufacturer. and I am facing problem connecting my Bluetooth devices, I tried to install the Bluetooth driver but it shows an error MSG it says (MAKE SURE UR BLUETOOTH RADIO IS PLUGGED IN) .this who do I can't plug my devices with Bluetooth PLS HELP me I am really frustrated please...

  Hi owace,

  (1) what is the complete error message you receive?

  Method 1: You can follow the steps mentioned in the link below

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2: Run the fixit available in the article below and check if that makes a difference

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected when you click the item

  http://support.Microsoft.com/kb/960531/en-us

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  You can follow the steps mentioned in the link below to set up the Bluetooth device

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  You can follow the steps mentioned in the article below which unknown device addresses question (Article applies to Windows XP is good for Windows Vista)

  How to troubleshoot unknown devices listed in Device Manager

  http://support.Microsoft.com/kb/314464

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you

• How can I get an upgrade for compaq presario cq40 for video card Home premium 32-bit of windows 7?

  How can I get an upgrade for compaq presario cq40 for video card Home premium 32-bit of windows 7?

  Hello

  What is the model of your machine? (cq40 is a series). Anyway, please try this:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=3805640#N228

  Kind regards.

• which processors can be used in my 396696-001 motherboard?

  What CPU can be used in a card mother 396696-001? I had this defective card, I bought to replace and used the original processor in the new Board of Directors. Installed in a laptop computer and sold it. later returned to the defective Board and said she had a shorted rectifier. Intend to repair it and have another laptop that needs it, but I need to know what CPU I can install in it.

  Hello

  396696 001 is 'card MOTHER COMPLETE HP PAVILION DV4000 INTEL 915GML' based on the following book:

  http://www.HP.com/CTG/manual/c00481822.PDF

  It supports:

  Intel Pentium M 2.00 - 1.73-, -1.60, or processor 1.50 GHz or Intel Celeron M 1.50-, -1.40, 1.30 GHz processors.

  It can support the family, but you need the BIOS just for her.

  Kind regards.

• How can I make a feature to create a table of values of variable size, which I can take the median?

  I am new to LabVIEW all this, I know it's a simple enough question, but:

  I create a montage where we have two pressure - low pressure and high pressure sensor transducers. The problem is there is noise in the signal I want to reduce - I don't have the full version of LabVIEW (base only) so I can't use the convenient median PtbyPt.vi to reduce the noise, but I wrote something that I thought would work (attached). The question is twofold:

  (1) I don't get pressure readings when I know that the system is empty.

  (2) the change in pressure is too slow for the application in which it is used - for example atmospheric pressure reading empty takes minutes when it should take seconds. I think I could solve this problem with a business structure that analyzes the table to see if the pressure changes vary more than a certain amount. If so, do not take the median.

  Any help would be greatly appreciated!

  Just make your own way to pt by pt. I did one here

• HP Pavilion g4: Mr President, I want to know if I can change my graphics card on my HP Pavilion g4 and which processor can I get

  Mr President.

  I want to know that can I change my graphics card on my laptop without changing the processor, and if I can't more the processor will be good for me to buy for high game and also please tell me what is the limit of ram on my laptop.

  I thank for your time, Mr. President, wish you good day.

  Hi Bro,

  Could you please help me with the serial number and the product number of the unit so that I could do my best to help out you.

  I am an employee of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others find a solution even.
  Click the 'Thumbs Up' to say 'Thank you' for helping!

• Where can I find a driver for cd/dvd rom for a hp compaq presario f700 laptop. ?

  MY PILOT JUST DISAPPEARED AND I can't READ DVD, S or CD or BURN MUSIC /.

  Hello

  Check with HP, their drivers support and documentation online and ask questions in the forums on
  known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =================================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP Support Assistant unable to complete downloading updates of Compaq Presario CQ60-206US

  Made a recovery using system recovery discs and the newly installed DVD player jumped during just before disc one was through. I closed and tighten the screw for DVD player and on disc 1.

  I did a sytem recovery before on this laptop and no problems. This time I can't even open the Support Wizard.

  The architecture is 32 bits.  I'm sorry I can't be more helpful, but this isn't really my field.  I wish you only good luck to find someone who can actually help, not to mention that inviting you to recover again.

• Support for the decommissioning of my compaq presario cq40-109tu...

  I really wanted to downgrade my laptop to xp because there a pre installed in vista, but I really don't like vista... That's why I decided to downgrade it, but I'm worried because I need tha drivers are compatible for xp (wireless adapter, bios, hidden, etc.) I browesed most of the forum but I'm not sure what wich and are not the right drivers for my laptop as well as the thing of nlite can you guide me in this regard? I think mine is also SATA... Thanks in advance for the answers and help...

  I'm not in the same impression that you have for Vista, in some points, I have found that VISTA has its own advantages.

  Given that your model has been built for VISTA, some functions may not work IE adjusting brightness (Fn + F7 or F8)

  However, you are not alone, many CQ40 lowered their laptop.

  If you want for XP drivers try the following steps.

  _____

  Make your Vista recovery cd/DVDs if you have not yet discovered it here

  Your model should ICH9 sata driver sliptreamed in the installer CD of XP. If you did it right, you'll BSOD error.

  Use Nlite to sliptream ICH9 sata driver.
  A good guide for driver sata sliptream, here

  Note: do NOT use this guide sata driver, your sata driver is below ICH9.

  ICH9 sata driver,

  The pilot lies in iaAHCI.inf and is called ICH9M-E/M SATA AHCI Controller, here

  Download nLite, here

  Some suggestions to avoid problems when installing XP:

  1 try NOT all wake sata drivers, use only ICH9--> ICH9M-E/M SATA AHCI Controller

  2. use of XP - SP2, much easier to use since many XP drivers were built based on XP - SP2.

  3 burn the installer of XP slowly and do not use the maximum speed, sometimes it create errors

  4. choose a reputable support CD, not the one at little cost.

  Audio installation was the hardest part, since the incompatibility of the BIOS.

  Please update your BIOS before installing MS - SAU, at least on F.12, here

  F.24 is the latest BIOS until this date.

  ____

  Drivers for CQ40-109TU

  Intel chipset (install and reboot before other drivers), here

  Install MS-SAU before Intel graphics (include HDMI sound) and IDT Audio drivers, here

  Intel graphics driver, here

  IDT High-Definition Audio CODEC Pilot, here

  High-Definition Audio (HDA) Modem Install drivers, here

  Broadcom Wireless, here

  Realtek RTL8102E Family PCI - E Fast Ethernet NIC, here

  JMB38X card reader Host controller driver, here

  ENE CIR Receiver (your Vista driver), here

  or if it doesn't work try Vista driver checked Intel, here

  ALPS Touchpad Pilot, here

  .NET framework (required before HP Quick Launch Buttons), here

  HP Quick Launch buttons, here

  If you have Bluetooth, here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

  Good luck

• Compaq Presario CQ56-110US: Will Compaq CQ56 8 GB RAM support?

  According to the Compaq Presario Maintenance and Service of Guide matrix on page 2 (http://h10032.www1.hp.com/ctg/Manual/c02657369), my Compaq Presario CQ56-110US laptop supports up to 8 GB of system memory, but by following a few lines to the bottom of the guide, it lists the configuration information that tops out at a total of 4 GB. If I remove the 2 existing memory chips (1 GB each) and install two 4GB chips, my laptop will support the upgrade to 8 GB?

  Compaq Presario CQ56-110US laptop

  Processor Intel® Celeron® 900 (2.2 GHz)

  Supports dual channel DDR2 800 MHz memory

  Thank you

  Strobe1

  Hello:

  Unfortunately, your model will not support 2 x 4 GB of memory.

  This is because it is equipped with an Intel Celeron processor, your laptop is the chipset Mobile Intel GL-40.

  This chipset only supports a maximum of 2 x 2 GB memory.

  http://Ark.Intel.com/products/35501/Intel-82GL40-graphics-and-memory-controller-hub

  By the way... 2 x 4 GB memory DDR2 would cost a lot of money.  It was the cheapest I could find.

  http://www.Newegg.com/product/product.aspx?item=N82E16820145599

• HP p6653w: which processors will be support of HP p6653w motherboard?

  Which processors will be support of HP p6653w motherboard? Is it worth the upgrade?  I even with 16 GB of RAM, boot the system takes about 10 minutes.  I have the AMD Athlon II X 2 250 processor processor, which is not necessary for this discussion, but I added it for completeness

  Hello

  Phenom II X 6 1035 T E0 2.6 GHz 3.1 GHz 6 x 512 KB 6 MB 2 GHz 13 x 0.975 - 1.425 95W AM3
  Phenom II X 6 1045 T E0 2.7 GHz 3.2 GHz 6 x 512 KB 6 MB 2 GHz 13.5 x 0.975 - 1.425 95W AM3
  Phenom II X 6 1065 T E0 2.9 GHz 3.4 GHz 6 x 512 KB 6 MB 2 GHz 14.5 x 1.0 - 1.475 95W AM3

  Phenom II X C2 4 805 2.5 GHz 4 x 512 KB 4 MB 2 GHz 12.5 x 0.875 - 1.425 95W AM3
  Phenom II X C2 4 810 2.6 GHz 4 x 512 KB 4 MB 2 GHz 13 x 0.875 - 1.425 95W AM3
  Phenom II X C2 4 820 2.8 GHz 4 x 512 KB 4 MB 2 GHz 14 x 0.9 - 1.425 95W AM3

  Phenom II X C2 3 710 2.6 GHz 3 x 512 KB 6 MB 2 GHz 13 x 0.875 - 1,325 95W

   Specifications of the motherboard, N-Alvorix-RS880-formfat (Alvorix)

  Processor upgrade information

  • Max TDP: 95W

• Please can you help. My PC has been repaired under warranty during which the motherboard was changed. I cannot now use CS6 design standard because I assume that he thinks it is on another computer. Previous activation was very good. What should I do now?

  Please can you help. My PC has been repaired under warranty during which the motherboard was changed. I cannot now use CS6 design standard because I assume that he thinks it is on another computer. Previous activation was very good. What should I do now?

  Try contacting Adobe personal chat:

  Contact the customer service

• HP Compaq Presario V5000 Intel 945GM motherboard computer laptop - 430198-001What processors can be used

  HP Compaq Presario V5000 Intel 945 GM laptop motherboard - 430198-001, which processors support this mother borard, it says in the spec supports dual core processors, it is unclear at what speed or spec that it comes with a celaron, 1.4 ghz processor. the duel core processors up to 2.0 ghz GS, which I think it would support?

  You are the very welcome.

  Yes, the T7200 is nice because of the 4 MB cache and can run a 64 bit (not necessary and not recommended unless you can install 4 GB of memory or more) OS.

  The T2500 can only run a 32 bit OS, but it will certainly better than celery (I like to call them) processor you have in there now.

• Windows 7 64 bit, asus motherboard that can take 32 gigabytes of ram, windows only see 16

  Windows 7 home 64-bit

  ASUS maximus formula v

  32 GB of ram motherboard that can take

  Windows only using 16?

  Intel 3rd gen I5 3570

  Intel SSD 120

  WD velisaraptor 150

  Upgrading Windows 8 will be Windows 8 Pro, so will support no doubt at least 192 GB. You could wait for that and pay only $39.99.

  http://windowsteamblog.com/Windows/b/bloggingwindows/archive/2012/07/02/upgrade-to-Windows-8-Pro-for-39-99.aspx

• I bought a new laptop with Windows 7 installed. Whenever I restart it, it has installed updates which can take up to an hour or freezes. You can ignore the automatic updates of Windows 7?

  I bought a new laptop with Windows 7 installed.  Whenever I restart it, it has installed updates which can take up to an hour or freezes.  You can ignore the automatic updates of Windows 7?

  You can turn off the automatic updates, Yes, but doing so would leave your computer at risk. Simply put with him: after another reboot or two, you will be fully patched AND fix!

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft