While doing a projector in 8.5...

Similar Questions

• I deleted killit.exe while doing a scan with Avast. Where can I get this file?

  I deleted killit.exe while doing a scan with Avast. Where can I get this file?

  At HP.

  What is 'killit.exe '?

• Under XP, while doing a disk cleanup, get a message "files required for windows runs properly have been replaced by unrecognized versions.

  While doing a disk cleanup, I received a message "files which are required for windows to run properly have been replaced by unrecognized versions.» To maintain system stability, Windows must restore the original versions of these files. Insert your CD-ROM in Windows XP Home Edition now. "and I did not... I can restore it online?

  * original title - windows file protection *.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If you have a genuine XP installation CD bootable which corresponds to your currently installed Service Pack, you won't get away with instructions to run sfc/scannow.

  Windows file protection wants to replace a file of the backup copy he keeps in the dllcache folder and WFP found that the backup copy of the file on your system is not look right, so he complains (there is a list of 3498 files PAM knows).

  When you see the original message, if you click Cancel, then choose 'keep' the file afflicted, you will see a warning message, and then a message like this in the case where the system log viewer:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64005
  Description:
  The protected system file taskmgr.exe had not been restored in its original, valid version because the Windows File Protection restoration process was cancelled by user interaction, user name is Jose.  The file version of the bad file is unknown.

  As you can see, the file that WFP is concerned is clearly stated in the paper, so now you know what is the file.

  For the above example, I used my (taskmgr.exe) Task Manager file to reproduce the problem.  You need to see what your event viewer message says.

  When you know what the file is, you can decide what to do about it.  There are probably other copies of the files on your system, or you can get the files from another source.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  eventvwr.msc

  Click OK to launch the event viewer.

  Check your event observer system log and look for a proposed Windows file protection event.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove personal information from your information
  After having stuck if you are forced to do so.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Backup error: "error 0x810000ED while doing Backup, error:"backup could not verify your backup settings.

  I recently did a system restore and now my scheduled backups fail. the error that says that "0x810000ED error while doing Backup, error:"Backup could not verify your backup settings"also my backups are scheduled for backup on the DVD edrive.» When I tried to change that there is no choice of road. Vista premium is the opsys. I think that the backups fail because there is no disk in the drive. I think that she previously saved to my second partition on the hard drive. I think bad?

  Hello

  backups must be stored on an external hard drive or DVD

  There is no backup point on another partition in case of disk failure hard as everything will be lost

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Screen not displayed while doing a background activity

  Hello

  There are many resources in this forum on it and I tried most of them, but none of them does not work for me.

  I want to display full screen while doing a background activity. I have:

  1. created the screen with a class that extends the class screen
  2. created a thread with my function activity of bottom ending with poping up on the screen.
  3. pushScreen()
  4. thread. Run()

  The right way to start a thread is thread.start (), not thread.run)

  If you call thread.run (), you simply run the Runnable class run() method with your own feed of the event, and this is what causes the screen to display * after * your activity of 'background' (which really exists in the foreground) ends.

• Am increasing the drive C for XP VM, get error while doing below it please help me.

  

  Am increasing the drive C for XP VM, get error while doing below it please help me.

  In this case, the reason is the virtual IDE drive. Increasing the disks IDE is not possible the vSphere client.

  Take a look at KB VMware: conversion of a virtual IDE disk to a virtual SCSI disk to see if this is an option for you.

  André

• Firefox crashes (even in safe mode) constantly and use 50% CPU while doing

  I use Firefox 36.0.1 and Windows XP (32-bit version).

  Lately, Firefox made this weird thing where it stops randomly load anything, as if the connection has been broken (it isn't, any other works very well). In this case, Firefox uses 50% CPU, when it is usually revolves around, well, 0%. Restart the browser, or waiting for a few minutes "fixed" the problem temporarily. Same thing in safe mode, too.

  I have the feeling that this * might * be related to Flash, since it seems to happen more often when I am watching videos, or stream on the shaking. I tried to disable the plugin-container and update the Adobe Flash Player plugin, with little success. Malwarebytes could not find anything either, and it does not feel like a virus anyway.

  Whatever it is, I'm out of options at this point. I had a lot of problems with Firefox for a while now, especially when it comes to videos/animations (I can't play the videos of Vine.co , for example), and it starts to make it difficult for me. I really don't want to switch to Chrome, I don't trust of Google and their browser doesn't have a lot of key functions I like in Firefox (such as the sidebar bookmarks < 3), so I really hope I can get help here.

  Any suggestions?

  Chrome is a pain, I tried to go back and difficulty of Firefox (so far), and again, I think I found the problem. I should mention that I tried these 5 suggestions before, btw, and none of them got rid of the problem. Yes, even in safe mode, with a profile is empty, no plugins, no firewall and without tab, it happens again, somehow. And Yes, Chrome will work fine with Firefox running in the background, as I mentioned in my previous post.

  What he did for me was turn off Prefetching and IPv6 times in all: config, following the instructions on this this page .

  I'm not sure that one did the trick (I kinda afraid to mess with that again, but I could test if you want to, it might be useful to others), but it looks like everything is going well for the moment.

• My computer eating more than half of RAM while doing nothing

  I don't know what is happening, but my ram keep going crazy today than before. at the time my computer to eat than 700 to 1200 MB same I use so much application it does only 1 700 MB, but today, I'm not doing anything he can hit 1 700 MB and when I opened my Chrome he hit from 2100 to 2700 MB, and if I open Skype it struck 3700 MB.

  Now when I post this question while opening windows media player, it remained between 1700 to 2000 MB

  can someone help me please:'O
  I use win7 ultimate 64-bit
  My specs:
  Gigabyte
  i5-2400 @3. 10 GHz (4 CPUs), ~3.3GHz
  4096 MB RAM (DDR3)
  NVIDIA GeForce GT 220 (2762 mb)
  And also I have installed Java on my computer, is Java really eat so much RAM? because it's in my computer

  Check the Task Manager > processes to see exactly what is running. Look for first two process
  use relatively large amounts of RAM, for example 50 000 k or more.
  If you see a program using a lot of RAM and you do not need this program that runs in the background all the time then you can stop it to load with Windows through the Configuration of the system
  (Type msconfig in the command run or start search for the menu bar to open Sys Config).
  Go to the Startup tab and uncheck the box next to any program that you know you don't need
  having loading when you start in Windows.

  If you can't find anything using a lot of memory when you view the Task Manager, you run
  a time to start full scan with your antivirus.

  64-bit Win7 use more RAM than a 32 bit OS. Mine is never less than approximately 1.35 GB at idle.
  It should be a fairly intensive system to use the 2 GB remaining, so it is
  no need to worry too much how much RAM is used at the time.

  Java is necessary and do not use a lot of RAM by itself. Java is not yet listed in the process
  on my machine at the moment.

  .

• Question while doing an OSB from REST to pass through.

  Hi all

  I'm doing a REST pass-thorugh-> OSB-> Service REST.

  While I am able to do a GET successfully, the JOB gives me questions.

  The POST is Source of REST gives no specific error, but the entity is created. Instead of 201 CREATED in response I get 200 OK in response.

  The strange thing is that while I try the OSB through curl command execution I don't face problems and everything goes smoothly. But Source rest the problem occurs.

  The difference that I see black and white hit the curve and source of REST I see is the type of payload.

  using curl the (json) payload into OSB entered service is like:

  {"casmwdcipwwlus111": {"jcr:primaryType": "nt: unstructured","job-signature": "environment Luma: local;}} Source:; ","adekai": {"jcr:primaryType":" nt: unstructured ',' al1de912tbk': {'platform':} "' Veswwtel: MBEEXD # 2s ',}

  {'support-status': 'white', 'nDECsl notes': '',' model': 'rfreDAL1912STBK', '-version of the software ":"0.7.7S","jcr:primaryType":" nt: unstructured "},"Fedwsdfl2410tbk

  However, since the source REMAINS the payload becomes like:

  JCR % 3AprimaryType = nt % 3Aunstructured & % 3Aoperation = import & % 3AcontentType = json & % 3Areplace = true & _charset_ = UTF-8 & % 3Acontent = % 7B % 22casmwdcipwwlus111%22% 3A % 7B % 22jcr % 3AprimaryType % 22% 3A % 22nt % 3Aunstructured % 22% 22% 3A % 22% 22job-signature %2C

  Luma + environment % 3 a and 3 b local % Source % 3 a + http % 3 a % 2F % 2F % 2Fapi 3 b + % 22 %%2C % 22adekai% 22% 3A % 7B % 22jcr % 3AprimaryType % 22% 3A % 22nt % 3Aunstructured 22 %%2C % 22al1912tbk % 22% 3A % 7B % 22platform % 22% 3A % 22Vdedtdel

  I think the issue I'm failng is due to this type of content payload.

  Guidance on this subject.

  Kind regards

  R V

  The question has solved when I changed the content type of "application/json" to "application/x-www-formulaires-urlencoded.

  Thank you

• Satellite C855-2GX - touchpad is lagging while doing somehting that need RAM

  Hey all :)

  I have a toshiba Satellite C855-2gx
  My problems touchpad lag so much if I install a software or I'm doing something which need to ram (games, defragmentation)

  There is no solution for my problem please :'(

  and sometimes the shift of the pc (keyboard and mouse do not work)

  Sometimes, I noticed the same on machines with low performance. It happens when the drive is extremely busy and portable needs performance for some intensive like defragmentation operations or antivirus scan.

  What you can do about it? In General, you can improve Ram to increase performance of s for laptop and also you can optimize the preinstalled operating system. With optimize I mean you can disable all unnecessary applications and the boot process for your laptop will take care with less background process.
  Also disable the Windows automatic update installation. Use the option check for updates but let me choose...

  I think that you need to upgrade RAM. If you need advice or help with this let us know.

• Incorrect Bitmap while doing a check of the file

  * Original title: bitmap

  the bitmap is wrong when he does a file check. How to fix?

  Open cmd, type: Sfc/scannow once thru type: CHKDSK C: /F agree to restart, type: EXIT

  restart the pc

• Laptop turns off while doing a restore on an installation of Vista OS; Displays a command prompt

  Okay, so to explain, I tried to fix my laptop all day, and I am REALLY frustrated right now. First of all, it is even dvd player does not work for some reason, so I but hey, maybe I can get a (an i'm going to probably won't even get help for saying this, but I'll do everything to set) iso. I do it, it's the installation goes well and everything, and then it stops. I turn the thing back roller, then it stops again! So I turn on again thinking that it should be fine, I'll just restore it once more and go just doing nothing until tomorrow, because I got all these windows problems 7 is already leading me because of this crappy bug that screws with the battery. When I try to roll back, it is therefore display a command prompt with X:$Windows.~BT\Windows\system32 window. I'm honestly about to _ just cry because I spent all day trying to solve something and instead my laptop goes right down. I seriously No. CLUE on what to do. Help, please.

  Yes, I know that I used an iso, what can do you will not help me, but please I need to know what to do.

  Hello

  The line of the command prompt indicates that it is thanks in part to a facility, likely from the .iso file you downloaded. Partly the problem from that that the installer has no way to mount a file .iso on the hard disk without loading an operating system that includes support for the execution of a (usually a virtual CD drive) .iso image. Thus, installation does not end because it cannot locate the drive that contains the necessary information. Now, you're stuck with a partial installation and no way to move back and forward.

  At this point, there are a regular install disc and a scanner to work. With laptops, it is best to use disks to restore / installation provided by the manufacturer the nature of one of their facilities. If your camera allows, you may be able to get away with a removable external disk to complete the installation, but you need to replace the internal drive not working in both cases.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Error code: 0 x 80042302 while doing the system restore.

  Original title: I need to restore my computer, but it says restore has the error 0 x 80042302. Someone at - it help him?

  Something done all my fonts if small you can read sentence so I thought that I was just restore to a date earier. But then when I went to restore it sad it has an error and does not work. Error # is 0 x 80042302

  Thanks to all those who can help you.

  Hi JanetAitken,

  1. What is the issue with the departure of the police?

  2. you remember to make changes to the computer before this problem?

  Method 1:

  Verify if the Volume Shadow Copy Service, the System Restore Service is started and set to automatic
  a. type Services.msc into the Start Menu search box, press ENTER.
  b. make sure that the Volume Shadow Copy Service is running and set to automatic.
  c. If the State of the System Restore Service is not started, start it. Also set this to automatic if it is not.
  d. restart the computer and check.

  Method 2:

  If still face problems, and then you try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  You can also check if the FI, you can restore the system in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Hope this information is useful.

• Getting an error code 0 x 80070005 while doing the system restore.

  * Original title: System Restore

  System Restore is not able to complete on my laptop, Windows 7. No matter what I choose, I get the error code 0x80070005 and the process is not complete restore point. I also turned off both my security programs as suggested, and it does not work. Security Essentials and MalWareBytes say there are no errors. Please notify.

  Hello

  Try using Safe Mode system restore.

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  See you soon.

• Cannot read CD while doing backup

  * Original title: cannot read blank CD

  It has been a few days now, when I tried to locate some files in a backup CD, I noticed that the drive does not recognize it at all.
  At first, I thought it was a hardware problem, but the DVD drive can read other CD or DVD, same blank DVDs, but refusing to read the blank CD, maybe, it was a problem of CD, I checked in my laptop CD was read normally and I could write about it with not even a problem.
  After that, I tried another CD label, nothing new.
  So I thought it would be an OS problem, I searched on the internet and the multiple topics that I saw that I realized that I must be in the right way, I followed a few guides, but still I couldn't solve the problem, come to the point to open my own topic.
  I have windows 7 64 bit Edition home premium, drive Samsung burner.
  I used Microsoft difficulty It Center and brought to action for playback of CD/DVD and writing
  I also checked for files, registry Upperfilters and Lowerfilters (the record was not the same that guides (similar to a huge key) so I searched the folder that have buttons for DVD player or something like that and I didn't see them.)
  I checked the updates of DVD drive drivers, but they were up to date and remove and reinstall the drivers... but still no effect.
  I also check the power and sata cable if they have been damaged, just in case
  additional info: the CD when inserted seeks to be read by the drive and when it stops at the icon in the folder of the computer, it's the same as it is when the disc is empty

  Thanks in advance for any response

  I've tried different brands of CD but with a difference... in any case, the problem cannot be solved... I have to restore my system... Thank you all for your time.