White rectangle appears on exported Gif rollover

Similar Questions

• Satellite P30-145: White Rectangle on screen

  I have a Toshiba Satellite P30-145, and he has recently developed a problem with the display. Whenever the computer is turned on, there is a large white rectangle covering part of the screen from top to bottom.

  Stopping and restarting the computer didn't help, display settings settings I tried did not work and a system restore did not work.

  I think it's maybe a problem of overheating the computer often becomes very hot and sometimes stops due to overheating (even if fans don't seem to be blocked when this happens).

  Anyone know what could be the problem and if it can be fixed?

  Hello

  I think that the fault of the graphics card might be the problem
  Maybe the GPU damaged because the temperature inside the laptop.
  As you say the laptop is overheating and it is really possible that it was a reason for that matter.

  In my opinion, you need to connect the laptop to the external monitor to check if the same will appear on the second screen.
  If you're going to see the same rectangle on the screen then the graphics card is damage and the entire motherboard must be replaced

  Feedback would be greatly appreciated

• Problem starting. White Rectangle bars are displayed

  I did a clean install of Windows XP on my C: drive formatted.

  My startup is now more than 4 minutes.

  All this because of this progress bar with these white rectangles at the bottom of the screen that appears before Windows XP loading.

  I ran "CHKDSK/r" 2 times and no errors found.

  I tried to repair Windows without success.

  What can I do else!

  He seemed to have solved this problem myself.

  After approximately 67 resets, the problem seems to correct itself.

  But later, I got the problem again.

  If I booted up just my computer with the Windows XP Recovery disk,

  I chose to format the drive fast, before you install Windows XP on the partition, and it worked.

  I have more white bars at the start up.

• White lines appear on the videos from my new Mac Pro - why?

  Hello

  I am the proud owner of a Mac Pro 2.7 GHz 12 - Core Intel Xeon E5 / 64 gig RAM / 2 X AMD over-pants D700 6144 MB running on OS X 10.9.3 (13 D 65).

  I use the last CC version, but also Red Giant Magic Bullet LOOKS to color grade my videos (on an adjustment layer). I have 3 HDD (1 SSD in the computer with the programs + 1 external (Thunderbold) G-RAID for cache files + 1 external Pegasus R6 2 (Thunderbolt 2) for images).

  Sometimes, when reading (but more often during export into Media Encoder) white lines appear on the video (see image below). Why?

  Is this a problem first? Is something wrong with my Mac? I reinstalled everything from scratch but the problem remains...

  I worked with the same programs on my previous iMac and I didn't have this problem.

  Any idea?

  

  Nicolas.Olivier wrote:

  Sometimes, when reading (but more often during export into Media Encoder) white lines appear on the video (see image below). Why?

  It is a problem that is known at this stage and is still under investigation by the folks at Adobe.  As they work through it, move your projects to the software rendering and move the SOUL to software exports.  It may take longer to work through things, but you avoid the strange lines.

• How to backup only the images that are found only in the white rectangle?

  Hello!

  
  Good morning/afternoon/evening, I have a question... when I try to draw outside the lines, in my project final when I export it to an image file, looks... weird here, I'll try to upload some pictures.

  

  as I want to do as in my last project (picture) all I want is the substance that is in the white rectangle.

  Incidentally, I learn how to use it so I'm sorry!

  How do you save your picture? What type of file? What version of Illustrator?

  For example, try one of these:

  1.) export > click on work plans 'use '.

  or

  (2.) in the file > "Save for Web" it is an option for "Clip for work plan" which is what you're after.

  Perhaps one of those who will help and meet your needs?

• White rectangles instead of transparency

  Hi all

  I'm a beginnger in InDesign - what a great tool!

  I get white rectangles instead of transparency when exporting (any version of) PDF or printed, but very well when you export to JPEG. I use a 3rd party template

  Using InDesign 6.0

  Thank you

  Blackbird

  Your question of the export quality could be a couple different things. It could be the result of saterizing the vecor in an effort to solve the problem of white box, or it could be that the link is actually missing or obsolete.

• White rectangle remains on the screen when you use the ActiveX icon

  Hi,
  
  I am using AW5.2 and I have a problem with erasing an ActiveX Icon. 
  I embedded windows media player and when I want to erase my ActiveX icon, a white rectangle remains on the screen. 
  
  I have tried moving it off the presentation window then erase or unload but that does not work.
  
  I have also tried just using:
  EraseIcon(@"WMP")
  Unload(@"WMP")
  
  Any other suggestions?
  
  Thanks,
  Dean

  Check the display mode of the element behind the activex control. Try to set the mode of this opaque object and see if the box appears again properly. Also, make sure the location you place this element when you try to move it out of the screen. Move to a place where their left of at least one pixel of it on the screen.

  HTH,

  Mike

• When I run firefox a little white box appears and I can't do anything?

  I am running amd dual core windows 7 4 GB ram. When I run firefox everthing works ok, then a white box appears in the middle of the page. then it stops working. When I try to click on any key the only thing I get is a beep. my opening page is changed to looking cool. I ran spybot search and destroy, malwarebytes anti-malware pro, anti-malware fighter iobit, exterminate and I have avg internet antivires security and none of them can find nothing in firefox. I have uninstalled and reinstalled again but I have the same thing again. can someone help me please.

  I did as you say, it has not worked. I disabled the aol toolbar. It's always the same thing. so I tried an update in safe mode, and it starts right now.

• Now that I have downloaded FF 7.0 successfully and the orange rectangle appeared, I can no longer see my tools, assistance, etc..

  I downloaded ff7.0 and the orange rectangle appeared, but now I can find is no longer at the top of the page my tools, help and other things that I need.
  Someone would be kind enough to help me?
  Thank you
  Leeflea.

  If you prefer the bar classic menu on the menu new handset of Firefox, you can switch.

  Press the ALT key and select

  Menu view > toolbars > Menu bar

  This same menu area allows you to show or hide your other toolbars.

  Can retrieve you at your leisure?

• videos are displayed as a white rectangle on some sites, but ok on youtube and with Internet explore

  I can see the videos on youtube, but on sites that link to youtube, I get a white rectangle.
  This problem does not occur with Internet Explorer.

  Try disabling hardware acceleration in Flash Player.
  
  See the videos in Flash will not play in full screen

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• Satellite L450D-113 - white line appeared

  Hi guys, hope someone can help with.

  Earlier this evening a white line appeared on my laptop. Down on the right side from top to bottom, is located at the top of any open window and task/tool downstairs bar. Also, the mouse pointer disappears behind it. I made a stop and restart, the line back to the Welcome screen, I also rolled back the driver display and re-installed the last updated and all this has done is to remover my desktop image and leaves me with a black background. The only thing I have not tried is to connect to an external monitor.

  System Spec
  Windows 7 64 bit
  AMD Sempron if-42 2.10 GHz
  3 GB Ram
  ATI Radeon HD 3200 graphics card

  Someone at - he hints or tips?

  Cheers in advance

  Chris

  Hi Chris,

  > The only thing I have not tried is to connect to an external monitor.
  But in my opinion, you should try this. So you can identify it of a malfunctioning of the internal display or mother/graphics card.
  Check this box!

  In my opinion, it seems to be a spurious material and so contact the nearest authorized service provider to get rid of this.

  The latest Toshiba display driver is installed?

• Re: Satellite P750 - white dots appear with animations, not everything at stake

  White dots appeared with all the animations but note during the matches and need info on a solution to this.
  I did a factory reset again it's an update on the graphics card drivers and now the computer sometimes overheats and shuts down and also to slow.

  Any help would be appreciated!

  It s a Satellite P750 with gt 540 m graphics card

  > did a update on the graphics card drivers and the computer now sometimes overheats and shuts down and also to slow.

  You must use the page of the Toshiba driver graphics driver because this driver is designed for mobile use. Drivers from other sources are not changed and lead to overheating GPU. This may damage your laptop.

  PS: it would be interesting to know if the white dots are visible on the external monitor and when you noticed these white dots exactly (what animation?)?

• Problem with the Apple's music, let the white rectangle

  So I don't need Apple music and all the information it might have on a certain artist of my libraby (and it find it kind of annoying..)

  So I went to block it by parental control preferences (I don't have a case of AppleMusic uncheck on the GENERAL tab.) and now I find myself with a white rectangle like this:

  

  that is still more a pain in the *.

  Please, tell me how to get rid of this...
  Thank you very much!

  Enable Apple music connect new Parental slot, then clear display Apple music under the general tab.

  TT2

• How can I get rid of a small white rectangle that stays on my screen and it also does not allow me to turn off my computer?

  How can I get rid of a small white rectangle that stays on my screen and it also does not allow me to turn off my computer?

  Hello

  1. Since when are you facing this problem?

  2. have there recent changes or updates made on your computer?

  3. do you get an error message?

  4. what happens when you try to shut down the computer?

  5. What is the small white rectangle you speak?

  Method 1:

  Step 1:

  Try restarting your computer in safe mode and check if the problem persists.

  If it works fine in safe mode try performing a clean boot in order to find the cause root.

  Step 2:

  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• drawFocus, drawHighlightRegion & XYRect is equivalent to a white rectangle in a custom field?

  It's one of those days where I should have stayed at home.

  Why the following sets a rectangle white when the false boolean value on?

  In other words, when it put there at the point, I get the highlight of rectangle of color TYellow as expected, when there is no discussion on the custom field (a class that extends the field); a white rectangle is drawn.

  I don't want to take anything either when there is no accent, which is equal to the value Boolean false.

  protected void drawFocus(Graphics graphics, boolean on) {
    paint(graphics);
    if (on) {
      XYRect rect = new XYRect();
      getFocusRect(rect);
      drawHighlightRegion(graphics, HIGHLIGHT_FOCUS, on, 0, 0, w, h);
           int prevColor = graphics.getColor();
       graphics.setColor(Colors.TYellow);
       graphics.drawRect(x, y, w, h);
       graphics.setColor(prevColor);
    }
  }
  

  Good or bad, I solved the problem by following these steps:

  1. My rectangle of drawing in paint with the previous color.
  2. Adding a call to invalidate in the onUnfocus method:

  protected void onUnfocus() {
    invalidate();
  }
  

  If there is a better, I'll be first in line.