Problem starting. White Rectangle bars are displayed

Similar Questions

• Problem starting. Rectangle white bars appear.

  This problem started to happen after a clean Windows XP installed on my C: drive formatted.

  Whenever I turn on my PC, it displays the BIOS Intel/HP as usual, then the black screen for about 15 seconds.

  Then the white rectangular bars appear on the bottom of my screen. These bars fill up like a progress bar and it take about 2 minutes.

  Then it shows the loading of the operating system Windows XP and resumes the boot upward as usual, no problems later.

  My question is how can I get rid of this progress bar white on startup, to save 2 minutes of start time.

  I tried the following:

  Running the console to repair Windows XP and running CHKDSK/r

  -No problems have been found.

  Repair Windows XP files with disk.

  He seemed to have solved this problem myself.

  After approximately 67 resets, the problem seems to correct itself.

  But later, I got the problem again.

  If I booted up just my computer with the Windows XP Recovery disk,

  I chose to format the drive fast, before you install Windows XP on the partition, and it worked.

  I have more white bars at the start up.

• Windows 7 edition starter, r internet bars are there but yellow exlimation point

  HI, I'm u

  sing a windows 7 starter, the I'm having problems, it is that when I turn on my computer, internet bars are there but so is a sighn yellow on it.

  Also when I checked my internet status it shows two connections it what I do

  You will find support for your connection Win7 problems in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking

• Repair of window Vista - problem starting - stuck scrolling bar load

  Hello

  Looking for assistance here, if anyone can help, I have a laptop LG R410, age two months running windows vista basic 32-bit.

  Laptop used to start and rest the scroll bar loading.  Tried through 'F8' menu to start in "Safe Mode", but wont even boot into Safe Mode, is the last driver loaded:

  Windows system32 drivers crcdisk.sys

  Also, tried "last good configuration" but nothing is.

  Try to repair windows with the repair disk. but no joy once again, by looking at the details of the diagnosis and repair, it shows repair stalled when the event log diagnostic testing.  It will not accomplish this test, even after leaving during the night.

  Also tried to go back to a restore point, but because it is new, it doesn't show any restore points that were to restore the system back.

  No backup available or go to restore.

  Memory Diagnostic test has been successful.

  Ran sfc/scannow to command prompt, is back with "start scanning system.  This process will take time. "A few seconds later says"Windows Resource Protection could not perform the requested operation. »

  A ran Chkdsk C: /f so none of the bad sectors on the hard disk.  Summary says "Windows has checked the file system and found no problem."  But return the following message at the end summary "cannot transfer messages saved in the journal of the events with the 50 State."

  Any help to help solve my problem would be appreciated gratefully.

  Thank you.

  Hi Ashish,

  Thanks for responding.

  Problem solved, or not!  Hard drive is damaged.  As a result of tests with checkdisk and knowing that he is not really do a thorough job.  I checked the hard drive once more with 'SeaTools' of Seagate.

  The hard drive is riddled with bad sectors.  Filed in support of Service today and they confirmed the hard drive is faulty and they will replace it under warranty.

  Thank you for taking the time to answer my question in the first place.

  All the best to you and the team at Microsoft.

  Kind regards

  Scott Connoilly

• At the start, both operating systems are displayed - the first is not what I want

  When I start my Dell laptop a screen comes with two choices of operating system

  Both are XP Pro - the first is highlighted and unless I have arrow downwards it boots - when I try to run a program, an error message says there is not enough memory.

  When I start arrow for the second choice and I am able to run programs.

  Can I pass, or better still eliminate one?

  It's simple, right?

  Thank you

  "I have two installations of XP on the same partition" -http://www.michaelstevenstech.com/xpfaq.html#20 MS - MVP - Elephant Boy computers - don't panic!

• Without scroll bars when search results are displayed in the "content" section

  Hello

  I use reactive HTML5 in 2015 of Robohelp.

  The Azure_Blue layout works very well, but when search results are set to appear in the 'content' section no scroll bar is displayed, if you can't navigate to the results of research which are off the screen. Scroll bars are displayed when its set to appear in the sidebar. Tried with many different browsers - same result.

  Is it bug? Others do for this problem?

  See screen capture below.

  See you soon

  

  The CSS fix mentioned by Willam resolves the problem.

• Hi, my navigation bar does not work and only the white pages are displayed

  Hi, my navigation bar does not work and that white pages are displayed - I watched the debate and made sure that each page is checked on "Export Page"; I checked that all pages are included with hyperlink. I deleted everything and started a new navigation bar; I have created a new site and started from scratch... nothing seems to work!

  It does not appear in the preview IE. I created 4 pages and when you perform a navigation bar, the title of the pages appears but when I saw and click one of the links, I get a full blank page with no navigation bar. What I am doing wrong? He worked for a time perfectly, but no more.

  Also, is it possible to manually check the links to see where I am redirected to?

  Thanks for sharing the file with me. Everything looks fine when I checked your file on my machine.

  Clear the browser cookies could solve the problem as default browser preview Muse use to render the pages.

  Kind regards

  Vivek

• videos are displayed as a white rectangle on some sites, but ok on youtube and with Internet explore

  I can see the videos on youtube, but on sites that link to youtube, I get a white rectangle.
  This problem does not occur with Internet Explorer.

  Try disabling hardware acceleration in Flash Player.
  
  See the videos in Flash will not play in full screen

  Blink the window "display settings":

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/help01.html

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• problem of gadget gallery that gadgets are displayed for one second & yet they gets disappeared

  I can't open my Gallery of gadgets when I try to open my Gallery, gadgets are displayed for one second, & yet they gets disappeared. Please help me in Re install my Gallery or if there may be another procedure to pass through.

  Hello

  Thank you for writing to Microsoft Communities.

  According to the description of the problem, it seems that you are unable to open the gadget gallery.

  1. have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Restore the desktop gadgets installed with Windows.

  (a) click Start and then click Control Panel.

  (b) in the search box, type restore Gadgets and then click on restore the desktop gadgets installed with Windows.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/desktop-gadgets-frequently-asked-questions

  Method 2: Gadgets Windows 7 may not work or be displayed correctly: http://support.microsoft.com/kb/2515657

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Please follow these recommended steps and post if you still experience the problem.

• Since Firefox 4, the main body of the page does not work or open, shows just a bar area, current update F8 on WVista, that none of the solved problem on F8 help topics

  Problem started when F4 installed.
  Firefox installs apparently without any problems, but when the opening of the center of the screen shows the search bar Google, nothing else, bar does not accept any input. Beam, bars search, tabs, etc all work.
  Tried all the tips and tricks, uninstalled/reinstalled installed F8 still the same problem.

  The problem persists if start you Firefox in Mode safe? http://support.Mozilla.com/en-us/KB/safe+mode

  What is with an empty profile? http://support.Mozilla.com/en-us/KB/basic%20Troubleshooting#w_8-make-a-new-profile

• Problem with the Apple's music, let the white rectangle

  So I don't need Apple music and all the information it might have on a certain artist of my libraby (and it find it kind of annoying..)

  So I went to block it by parental control preferences (I don't have a case of AppleMusic uncheck on the GENERAL tab.) and now I find myself with a white rectangle like this:

  

  that is still more a pain in the *.

  Please, tell me how to get rid of this...
  Thank you very much!

  Enable Apple music connect new Parental slot, then clear display Apple music under the general tab.

  TT2

• How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  Use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Go to method 3.

  3. for the network icon.

  (B) to activate the icon network - Enable_Network.reg< click="" to="">

  * Don't forget to restart to complete the procedure. ***

• CANNOT ACCESS EMAILS; Why are we unable to access our emails through windows. Problem started last night.

  Is that w could do to be able to access our emails, once again?

  Since you said "problem started last night '...

  Assuming you are using Vista.
  The method may not work, but it's worth a try:
  Do a system restore. Choose a date where you did not have this problem as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• If I open a picture of the bridge, I often have the large white or black areas/blocks/rectangles in the pic. Changes in areas, if I choose another size. If I save the pic is ok, nothing to see rectangles. What is c? How to stop it? Thank you.

  If I open a picture of the bridge, I often have the large white or black areas/blocks/rectangles in the pic. Changes in areas, if I choose another size. If I save the pic is ok, nothing to see rectangles. What is c? How to stop it? Thank you.

  It is a question of gpu. It has been discussed many times here. See this thread. https://forums.Adobe.com/thread/1855166?q=black%20and%20White%20squares