Who is the last recommended build?

Similar Questions

• What is the last recommendation on the use of Aperture with El Capitan system software?

  What is the last recommendation on the use of Aperture with El Capitan system software? I'm sure to BONE 10.11.x since I was a big user of Aperture?

  TIA,

  If you need a feature that has opening but Photos doesn't work, click here and follow the instructions.

  (141652)

• who is the last R12 version available

  Hi friends,
  
  Who is the last R12 version available for download. pls guide me.
  
  
  Thank you
  Rambeau

  Hello

  Electronic transmission site, you can download 12.1.1

  Oracle e-Delivery
  http://eDelivery.Oracle.com

  For 12.1.2 Please see:

  E business Suite Release 12.1.2 now available
  http://blogs.Oracle.com/stevenChan/2009/12/ebs_1212_available.html

  Kind regards
  Hussein

• Flash in the last nightly build is not working and causing accidents. Help?

  I use an Asus Transformer tf101. I updated today every night and now flash does not work in the program. Once I try to play any flash video, the program crashes and it blocks once or twice more after that before so I can use it again. I deactivated all my plugins and cold booted but in vain.
  Another question, that I have, is that it freezes sometimes on the homescreen at startup. This instance occurs usually after that I try to type an address or use a bookmark. The only way I found around her had to press one of the three icons top site first. Does anyone have a solution to this?

  Edit: I started the previous generation at the moment. It is not as nice as the style of the most recent version, but it plays better than other mobile browsers out there flash video. As a break, jump before or put the video in full screen, the controls are always hit or miss.

  This is a known issue with the current nightly builds. We hope she will rule early next week. I don't think Aurora builds are affected by this problem. http://www.Mozilla.org/en-us/mobile/Aurora/

• who is the last disk in per_all_people_f and per_all_assignments_f

  Hi friends,
  
  I'm relatively new to HRMS. I am trying to connect to per_assignment_f and per_people_f to get the last record employee...
  But I end up in multiple records are displayed...
  
  can you provide sample sql exactly last record for account held the employee...
  
  Thank you
  ASP.

  Hello

  the conditon should be:

  trunc (sysdate) between rt.effective_start_date and rt.effective_end_date
  and trunc (sysdate) between pt.effective_start_date and pt.effective_end_date

  Try this: -.

  Select pt.person_id,
  PT. Employee_number,
  PT.title,
  PT.full_name,
  PT.first_name,
  PT.middle_names,
  PT.last_name,
  nickname of PT.known_as,
  PT.date_of_birth,
  PT.marital_status,
  PT. Nationality,
  PT.national_identifier,
  PT.email_address,
  PT.work_telephone,
  PT.effective_start_date,
  PT.effective_end_date,
  RT.assignment_id,
  RT.grade_id,
  RT.position_id,
  RT.job_id,
  RT.employment_category,
  RT.manager_flag,
  RT.payroll_id,
  RT.location_id,
  RT.primary_flag
  of per_all_people_f pt.
  per_all_assignments_f rt
  where
  PT.current_employee_flag = 'Y '.
  and rt.primary_flag = 'Y '.
  and pt.person_id = rt.person_id
  - and pt.person_id = 111110
  and trunc (sysdate) between rt.effective_start_date and rt.effective_end_date
  and trunc (sysdate) between pt.effective_start_date and pt.effective_end_date

  Hope this fixes your problem

  See you soon

• I have a number of accounts (left), I would like to change the order in which they are displayed, THE who is first and who is the last.

  In the left column of the program is a list of all the e-mail addresses that Thunderbird checks. I want to change the order of the list of e-mail addresses. Some addresses are more important to me than others. I would like than to be at the top of the list. How can I move them in the order I want?
  Thank you

  Install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/

• who was the last version to allow the opening links in a new window by default?

  Used to have the opportunity to set as default, when I clicked on a link, it would always open in a new window. I want to revert to this version... If it is supported or not! I HATE THE TABS!

  You can disable tabbed browsing in the options:

  Orange Firefox button or classic menu Tools > Options > tabs

  Uncheck the boxes of the first and the fourth. This will restore the default behavior for links, which is:

  • If a 'target' is defined in the link, or launch a new window or replace the contents of the existing window with the same target.
  • If a script is triggered when you click on the link, leave the script to open a new window.
  • Otherwise, follow the link in the same window.

• Who is the last update for adobe photoshop?

  I check for the software adobe photoshop, my friends system, so I ask what is it. It is explain some point of view, photo editing and create another design graphics by me. I have no idea so share this site and said that learning here. Helps a lot of people here so please guide me.

  I think you should get the latest version.

  See pricing and membership creative cloud plans | Adobe Creative Cloud for plans and prices.

• who is the last update for photoshop cs6?

  Hello

  I run under 32-bit w7 cs6

  and I've updated to 13.0.1

  but here http://www.adobe.com/support/downloads/detail.jsp?ftpID=5408 it is Adobe Photoshop 13.0.1.1 update for Adobe Photoshop CS6

  and if I go in Help and updates... it does not find 13.0.1.1 but only 13.0.1

  can I download and run the update? or 13.1.1 is the same 13.0.1?

  and dynamiclinkmanager.exe part of photoshop cs6 standalone or master collection?

  because I've never seen with photoshop cs5

  PS is it a complete pdf manual or manual not download pdf

  Thank you

  PS is it a complete pdf manual or manual not download pdf

  http://helpx.Adobe.com/PDF/photoshop_reference.PDF

• SQL to bring the last line and the just previous row in the table

  Hi all

  I have a table of orders, where a serial number can be booked with different number several times over several days.

  Requirement is to bring the last order (based on the date of creation) number associated with this serial number and just previous order number and data in the format below.

  Last order number

  Serial number

  Reservation location

  No booking

  Previous order number

  Serial number

  Reservation location

  No booking

  It is essentially to generate the report that a reserved serial number with how many times with different orders and report must contain details of order two in a line.

  Kind regards

  You asked for the last line, and you have not provided data of the example or the expected results, so you get what you asked for.

  You may be looking for data to be partitioned on another value, for example

  SQL > ed
  A written file afiedt.buf

  1. Select deptno, ename, empno, mgr, hiredate, prev_empno, prev_ename, prev_mgr, prev_hiredate
  2 starting at)
  3. Select deptno, ename, empno, mgr, hiredate
  lag (empno) 4, over (partition by deptno arrested by hiredate) as prev_empno
  lag (ename) 5, over (partition by deptno arrested by hiredate) as prev_ename
  lag (mgr) 6, over (partition by deptno arrested by hiredate) as prev_mgr
  lag (hiredate) 7, over (partition by deptno arrested by hiredate) as prev_hiredate
  8, case when hiredate = max (hiredate) on (deptno partition) then 1 0 otherwise fine as max_hiredate
  9 of PEM
  10       )
  11 * where max_hiredate = 1
  12.

  DEPTNO EMPNO, ENAME MGR HIREDATE PREV_EMPNO PREV_ENAME PREV_MGR PREV_HIRED
  ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
  10 7934 MILLER 23/01/1982 7782, 7839 KING 17/11/1981
  20 7876 ADAMS 7788 23/05/1987 7788 SCOTT 7566 04/19/1987
  30 7900 JAMES 7698 03/12/1981 7654 MARTIN 7698 28/09/1981

  who is the last disc, by Department, as well as the previous within the same Department.

• Build the name of guard of the table of the last element, but not the others. Workaround solution?

  Hello

  Sorry if this has been posted before, I did the search first, but can't find anything.

  Problem is that I have two configurations which are identical and must be ordered by a single vi. Given that they are the same, they are configured with the same sets of parameters so I decided to create a cluster of these and then build an array of clusters. In this way I need to use only a thread and if I need a given parameter I can get it easily from here (or so I thought) and also because I need to see if anything changes I can compare a thread instead of each of the parameters.

  The gui has the list of parameters, then in the block diagram I group them appropiately, using "Bundle name" and then each bundle in a table by using "build the table. Problem is when I have the index in the array for the first place of the configuration and usage to unbundle the parameters I need, using "ungroup by name" (although if I use "Unbundle" the same thing happens) and lo and behol, the output names come from the configuration of the second, not the first.

  Here's the curious thing, though, even if the names are all wrong, that the values are correct. I could live with that, but it's more boring it will be another very difficult user to understand the schema more this is just a proof of principle to test with two, eventually there will be eight or more and who's going to get really confusing.

  Is there a way to get around this? Even if it is to change the names after unbundling.

  Check the attached vi to see what I mean.

  I think you forget an important point on the tables.  The only thing that may be different between each element of a table is its value.  The elements in the array must all share the same properties.  This would therefore include the names of the different elements that make up the cluster that is a table element.

  It seems that the last group that builds in the table is the one that defines the names of the items that are in the element of the cluster.  You must give all elements of the array with the same name within the cluster.  Or use a cluster of clusters rather than a table of cluster to create your data structure.

• How to upgrade my Adobe Acrobat 9 Pro? Got this message on an adobe document: this file seems to use a new format that this version of Acrobat is not supported. It can not open or display correctly. Adobe recommends that you upgrade to the last verse

  How to upgrade my Adobe Acrobat 9 Pro? Got this message on an adobe document: this file seems to use a new format that this version of Acrobat is not supported. It can not open or display correctly. Adobe recommends that you upgrade to the latest version of our Acrobat products.

  Basically, you spend money and buy the last version, which I think is a product of cloud...  Acrobat cc - Plans and prices | Adobe Acrobat DC

• Building for Stage3D - can't find the last api

  Hello

  I Flash CS5.5 and am trying to build a sample Model Viewer Away3D 4. I can't be the last api for fp11, because the compiler is back with this:

  "Type is not found or is not a compilation constant: TextureBase.

  The file 'RendererBase.as' of the Away3D library is to import a number of files in the package flash.display3D (including TextureBase), which apparently I didn't.

  I downloaded the latest version of the debug flash player 11, what else I should do? Thank you

  -rich

  Hi, I found an interesting article that will guide you through the entire process. He talks about the installation of libraries for a new version of Flash Player in general, don't get confused by the "10.2" he speaks.

  http://rhuno.com/flashblog/2011/04/04/how-to-compile-for-Flash-Player-10-2-with-Flash-CS5/

• iPhone battery drains too fast since the last update! Please fix this

  MY battery life drains too fast since the last update. Use to be able to use my phone all day and have more than 50% at the end of day. Now I can't do half a day yet. And that's just since the last update

  Hello JasonV!

  I definitely want to get the most out of the battery of my iPhone, considering how much I use and depend on.  We can certainly check a few settings.

  First of all, check out this article to see if there are any apps or processes that use more battery than expected: on the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  Then see that all of your settings are configured as this guide recommends: Batteries - maximize Performance - Apple

  Once those who are defined, give it a try with the settings and let us know which applications use the most power and the percentage.

  See you soon!

• FAQ (29): why the "See the last SoftPaqs" button grayed out?

  When I'm in the mode 'All products' or "Building Driver Pack", "Show the last SoftPaqs" button is gray. How to enable this feature for SDM will show me the latest versions of the SoftPaqs for my selected models?

  

  In the modes of 'Building Driver Pack' and 'All products', you have the ability to check more than one model. Unfortunately, showing the latest version of a SoftPaq for more than one model is problematic because the same version of a SoftPaq maybe not the one which is responsible for all the models selected that makes the application unnecessary and ambiguous.

  Just think about it for a second. If we had a model (let's call ModelA) 5 years ago and another model who is only 1 year old (let's call ModelB) selected in SDM. Keep in mind that computer models of different years will probably have material differences that require different hardware drivers. Also note that this could be the case even if the models were of the same year. Furthermore, models most recent software qualification only goes back a number of years. It could very well be that the software can run on older models, but if HP do not qualify and test it, HP will not associate the new version of the SoftPaqs with older models.

  So, what does the request: "Show me the latest versions of SoftPaq for some models ModelA and ModelB" really means? We asked this exact question to various people and two completely DIFFERENT responses are returned. The answer seems to be influenced by the different needs of the Organization to which the respondents belonged to.

  For some, the answer was: ' show me the most recent SoftPaq who qualified for BOTH models. This is known as a query "AND". This query would only show what are the common SoftPaqs between ModelA and ModelB, but would show NO SoftPaqs, who were qualified for only one and not the other.  With this query, most of models that are selected, the lower number of SoftPaqs appears.

  But for other respondents, the answer was ' show me the lastest Softpaq is qualififed for EITHER model; which is a query "GOLD". This query would show all the SoftPaqs associated with each model. But it is not clear if each SoftPaq was qualified for ModelA, ModelB or for both. This request seems to be too broad, because the models have been selected, more likely it is that a SoftPaq would appear even if she wasn't qualified for a model on the list only.

  So, to illustrate this, imagine the following scenarios...

  Scenario 1

  We have three SoftPaqs. SoftPaq1 qualified for the ModelA and ModelB, SoftPaq2 is ONLY responsible for ModelA and SoftPaq3 is ONLY responsible for ModelB. What SoftPaqs should appear as the "last SoftPaq ModelA and ModelB"?

  Answer:

  Query AND: SoftPaq1 because it is "the latest version of a SoftPaq who qualified for BOTH models.

  GOLDEN request: SoftPaq2 and SoftPaq3 because everyone is "the latest version of a SoftPaq for at least one model.

  Scenario 2

  What happens if the SoftPaq3 did not exist?

  Answer:

  Query ANDoftPaq1 because it is "the latest version of a SoftPaq who qualified for BOTH models.

  OR queryoftPaq1 and SoftPaq2 because everyone is "the latest version of a SoftPaq for at least one model.

  Scenario 3

  What happens if the SoftPaq1 did not exist?

  Answer:

  AND query: No. SoftPaq is qualified for BOTH models

  GOLDEN request: SoftPaq2 and SoftPaq3 because everyone is "the latest version of a SoftPaq for at least one model.

  Add more models and SoftPaqs and results gets confusing real fast. Therefore, to avoid confusion, it was decided that the "View the last SoftPaqs" button would be disabled if more than one model was chosen because it is the only case where "See the last SoftPaqs" is not ambiguous. Thus, the "View the last SoftPaqs" button is available, if only a model (and OS and language) are selected.

  If you have several patterns that you manage, and you want to use the button "See the last SoftPaqs", please enjoy SDM configurations and save a configuration for each model. For more information on SDM configurations, please see using SDM.