Similar Questions

• How can I update the BIOS without using a CD?

  Hello!

  I recently decided to update my RAM from 2 GB to 4 GB. After installation, I started my computer to find that it would not recognize the new memory. After doing some troubleshooting, I decided to try to update the BIOS, like the 2010 version. I have downloaded the update to the BIOS boot CD implementation of lenovo, burned a disk and restarts, I found that the boot order has no CD contained thereon. Here's the catch: I do not have the supervisor password. It is a mobile phone in hand, and I tried to find the password nothing is done. It's the current boot order: USB key, hard drive.

  My question is, can I create a BIOS update disk using a USB key, or update the BIOS of another way?

  I understand that it is impossible to recover the supervisor password without having served (that I prefer to not do, even if I have to return my Crucial RAM)

  My system features:

  ThinkPad L512

  BIOS version: 1.04

  BIOS date: 2010-3-26

  Controller of Embeded Version: 1.01

  Windows 7 32 bit

  Thanks for your help.

  Welcome to the forum!

  Two things here:

  (a) If you run the system update, it should offer the latest BIOS for your machine as well. I never did on a protected device, so it may or may not work, but perhaps worth it.

  (b) I doubt the ability of the system to recognize the new RAM has something to do with the BIOS. Much older than your ThinkPads will take place 4-8 GB of RAM with an old BIOS, older than your machine initially.

  Good luck.

• Who has the labSQL can use in labview7.1?

  Hey, who has the labSQL data set can use labview 7.1? Thank you

  It is on the LabSQL page. It is said that the requirements LabVIEW 6.0 or later version.

• How to install or update the store applications using the dongle

  I don't have a wifi connection. I want to download or update applications on the store of windows in my pc. How can I do because he just waits for Wi-Fi every time I try to install or update an application.

  Hi Abhishek,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  I also like the fact you want to update or install applications using the USB.

  I suggest you to connect your computer to the Internet using the USB dongle.

  You can refer to this article:
  http://Windows.Microsoft.com/en-us/Windows/Connect-Internet#1TC=Windows-8

  Without the Internet, apps will not install or update.

  You can also light updates automatic app.
  Reference:
  http://Windows.Microsoft.com/en-in/Windows-8/automatic-app-updates-help

  See also:
  https://support.Microsoft.com/en-us/KB/2800086

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem to update the views by using templates

  Hi all

  I'm trying to implement the model of presentation using Cairngorm in my flex application. I have a problem to update the views using the presentation model.

  Here's what I do.

  1. I am trying to create a login screen.
  2. To store the current of the user logged in ModelLocator, I created a "currentUser" property
  3. My Member information screen (the screen is displayed after successful login) displays the username like this.
     • < mx:Label label = "{memberUI.fullname}" / > "
  4. I created a template, memberUI for Member information screen. It has a property called "name", which stores the full name of the current user.
  5. I created a method in the presentation model called setFullname() which does the work of definition of the fullname property. This function is called in the answering machine for the connection event.

       public function setFullname():void {
            var appModel:AppModelLocator = AppModelLocator.getInstance();
            appModel.currentUser = event.result as UserVO;
            var uim:memberUI = new memberUI();
            uim.fullname = appModel.currentUser.firstname + " " + appModel.currentUser.lastname;
       }
  

  But even when I was able to login, I am unable to display the full name in the view. Why is this happening?

  Can someone tell me what I am doing wrong?

  Thanks and greetings

  ShiVik

  I've seen two approaches to this within the PM + Cairngorm architectures.

  (1) pass a reference of your MP in your Cairngorm event to allow the command / responder call Update with the results of a service. It's an approach simple but tie your orders and the speakers to your PM class, which makes them less versatile.

  (2) have your PM record reminders with your Cairngorm event to allow results to be returned to your MP. Reminders may take the form of event, function references listeners or an object that implements IResponder.

  Unfortunately, I'm not aware of many examples online for this, but the following link to get (2) passing references to functions:

  http://www.allenmanning.com/?p=31

• problem updating the contract line using OKC_CONTRACT_PVT.update_contract_line

  Hi all
  
  I am facing a problem trying to update the end of contract line dateusing the api OKC_CONTRACT_PVT.update_contract_line. When executing the procedure that calls the api it returns the State S without error and also update the table of base that is OKC_K_LINE_B with new end date successfully.
  
  The problem is that whenever I'm if commit the changes to the front end, application - contract line record gets endangered. What is happening to all instances of the element. Here are the settings I am passing through the api,
  
  p_chrv_rec.ID: = < id for row in the okc_k_lines_b table >;
  p_chrv_rec.end_date: = < new_end_date >;
  p_chrv_rec. VALIDATE_YN: = 'N'; -I don't want the api to validate attributes
  
  Please note that the api is correctly updating the record base table but not able to display in the application. I tried to compare the same record before and after the update to confirm if no value of the indicator is is changed due to the record does not appear in applications. but there is no such changes except the new date and the annualiazed_factor. Can is it you pls let me know no work around as if any option profile must be changed to achieve the same.
  
  Navigation to the im application to check the update new end date of contract line is:
  
  Oracle Install Based Agent user-> Instance element-> contracts
  
  Thanks in advance.
  
  Kind regards
  Hespel.
  
  Published by: user10545574 on July 8, 2010 06:56

  Hello

  Shouldn't you be using the public api (OKC_CONTRACT_PUB) rather than the private sector? By directly using the package private, you are probably bypassing some features that could cause problems like the one you are talking about.

  Kind regards.

• Error trying to update the model XML using XML Publisher administrator

  Hello people,

  We are on R12.1.3

  I changed a condition in a report and you try to download the new model XML using XML Publisher administrator.

  When I click the button to apply, it is throwing an error "bad request".

  Navigation: XML Publisher Admin > data definitions > query report

  Click on the report name > click 'Update file', in addition to the data model > choose file > click Apply

  I get the below error

  Bad request

  Your browser has requested that this server could not understand.

  
  

  Now, I could not download a new model of XML.

  
  

  I'm doing something wrong.

  
  

  Kind regards

  Kris
  

  user10163762 wrote:

  Thanks Eugen and Hussein.

  The problem is not with the template.

  It seems to be a problem in this particular case.

  Transferred to another instance.

  However once I run the program, I can't display the output as flashes and disappears from the window of the browser.

  My colleague says, it's to do with the trusted site to download something from the browser.

  Can you please guide me on how to solve this problem?

  http://bit.LY/1k8e2vi

  Thank you

  Hussein

• Update the VMWare tools using Power CLI: select VMGuests

  Hello world

  I have the following script to upgrade VMWare Tools without a reboot.

  update-tools - VM VNNx - Noreboot

  However, I need only update client VMWare (UAT) 200 instead of my full prod environment.

  can I use this script and refer to a text file for determine which I want to upgrade customers.

  Or another script that would allow me to use a VMGuests text file I want only ugrade.

  
  Thanks for your help

  If you make a file text VMs.txt with on each line the name of a virtual computer that you want to update, you can update all these virtual machines VMware tools with:

  Get-Content -Path VMs.txt | `
  ForEach-Object { Update-Tools -VM $_ -NoReboot }
  

  Best regards, Robert

• How to update the table by using the value of a column in a table field

  Hi all
  use APEX4.1,
  I have a tabular presentation based on the HOLIDAY table, it contains the following fields,

  Leave_id
  Employee_name
  No_of_days
  Status

  Here's the column LOV updateable status.
  Lov includes 2 values IE APPROVE and REJECT
  
  and I have another Table called LEAVE_HISTORY, it contains the following fields.

  Emp_name
  status

  Here whenever the ststus is updated (click the button SUBMIT) in tabular form should also be updated in the LEAVE_HISTORY of the SITUATION of the table column.
  
  I tried the following in the process of "WE SUBMIT AFTER CALCULATIONS AND VALIDATIONS,"

  begin
  update LEAVE_HISTORY set status= status where upper(employee_name)=upper(emp_name);
  end;

  but it is not kept up-to-date,
  When we updated through forms we can use something like this,

  update LEAVE_HISTORY set status= :P200_status where upper(employee_name)=upper(:P_200_emp_name);  <----here we are referring page item i.e (:P_200_emp_name)

  as the code above, how to run the columns in a table?
  Thank you.

  Hi Gurujothi,

  Try this,

  begin
  update LEAVE_HISTORY
  set status= :STATUS
  where upper(Emp_name)=upper(:EMPLOYEE_NAME);
  end;
  

  Brgds,
  Max

• MDS-01401: fails to update the configuration by using the console of B2B

  Hello expert B2B.
  I get the following error applied changes to TP using the console of B2B. I checked the log and it give me any more information than that below. I restarted two weblogic soa breaks, and yet it is to launch the same error.
  
  MDS-01401: update of a node in a single document "/ soa/b2b/tp_MyCompany.xml" with another document node "/ soa/b2b/tp_MyCompany.xml.bak" is not allowed.
  
  ADF_FACES-60097: for more information, please consult the error log of the server for an entry beginning with: 60096-ADF_FACES: server during the PPR, #39 Exception
  
  
  Any ideas on this one?
  
  Thanks in advance!

  I doubt that the B2B repository has been corrupted. Take export from the repository, purge the existing design time repository, restart the server and then import it again. If this does not work, lift a SR with support. You can consider diffusion through your repository B2B export to my id.

  Kind regards
  Anuj

• update the table by using the analytic function

  I have a table like this one:
  

  create table fred (test varchar2(50), seq_no number(18,0));
  
  
  insert into fred (test) values ('A');
  insert into fred (test) values ('A');
  insert into fred (test) values ('A');
  insert into fred (test) values ('B');
  insert into fred (test) values ('C');
  insert into fred (test) values ('D');
  insert into fred (test) values ('D');
  insert into fred (test) values ('D');
  insert into fred (test) values ('D');
  insert into fred (test) values ('E');
  insert into fred (test) values ('E');
  insert into fred (test) values ('E');

  I want a single statement that will update seq_no with a unique number for each test in seq_no insert value
  
  for example like this:
  

  SQL 001> select test, row_number() over (partition by test order by test) from fred
    2  /
  
  TEST                                               ROW_NUMBER()OVER(PARTITIONBYTESTORDERBYTEST)
  -------------------------------------------------- --------------------------------------------
  A                                                                                             1
  A                                                                                             2
  A                                                                                             3
  B                                                                                             1
  C                                                                                             1
  D                                                                                             1
  D                                                                                             2
  D                                                                                             3
  D                                                                                             4
  E                                                                                             1
  E                                                                                             2
  E                                                                                             3

  I am sure that this should be an easy thing, but for the life of me I can't figure out how do it in a single statement. I should know this... hangs head in shame

  Use MERGE

  SQL> merge into fred
    2  using (select rowid rid, test, row_number() over (partition by test order by test) sno
    3      from fred) fred1
    4     on (fred.rowid = fred1.rid)
    5  when matched then update
    6     set seq_no = sno
    7  /
  
  12 rows merged.
  
  SQL> select * from fred
    2  /
  
  TEST                                                   SEQ_NO
  -------------------------------------------------- ----------
  A                                                           1
  A                                                           2
  A                                                           3
  B                                                           1
  C                                                           1
  D                                                           1
  D                                                           4
  D                                                           3
  D                                                           2
  E                                                           1
  E                                                           2
  
  TEST                                                   SEQ_NO
  -------------------------------------------------- ----------
  E                                                           3
  
  12 rows selected.
  

• Error updating the properties of use

  When you go to setting > options > extensions > dataplugins clicking on a use on the properties... button gives me an error.

  I get the error

  Error executing command 'SUDDlgShow '.

  Error: Access Violation

  Address of the error: 0007c2ca

  Module name: gusiex.ocx

  Clicking OK gives me another error displaying script code

  I have uninstalled/repair/reinstall several times and can not get this error go away.

  
  

• To update the database by using selection lists in an interactive report

  I use the Application Express 4.2.6.00.03.

  I have an interactive report in two columns with a selection list in the second column. The generated query the report is

  Select pn.project_name,

  (Select APEX_ITEM. SELECT_LIST_FROM_QUERY(2, PN.) Batch, 'SELECT status_name d, r from RES_STATUS order by sequence batch', NULL, 'NO') of double) STATUS

  of res_project_name_detail pnd, pn res_project_name

  where pn.project_name_id = pnd.project_name_id

  Now I need to find a way to change the database to reflect the changes made to a select list that appears in the second column (batch) as they are made. Are there any suggestions as to how this could be done? I have experience of limited Java script if a solution that I can use directly would be great.

  Martin

  Reference SebastianR

  
  

  created a small example

  https://Apex.Oracle.com/pls/Apex/f?p=28281:16:16619647501605:no:

  WORKSPACE:-REEMATEST

  username:-test

  password:-test

  application 28281

  page 16

  hope this helps you in some way

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• I tried to update the drivers that I used my motherboard Asus drive and some how it changes some firmware on the operating system

  OK, my problem is that I don't have a PC before generation. It is a custom build. A week ago while I was trying to update the drivers, I used my motherboard Asus drive and some how it changes some firmware on the operating system. now that is fixed. and now, just yesterday I downloaded the Windows Essentrils to win mail. This morning I woke up and started my PC and I get a red screen saying that some unauthorized to the firmware change has been done to solve this problem, I think I have to erase my hard drive and re to stall my win 7. and how do I do with the disc because it is a refurbished lic. Windows Essentials

  Yes

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation