Why all my files disconnect and re connect is no longer?

Similar Questions

• I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  You have been discharged into a temporary user account. It may be a glitch, or your user account may be damaged. First try a system restore when things worked. If it suits it, fine. If it is not then your account is damaged and the best thing to do is to create a new user account and copy your data from the old to the new. I would also like to do a Chkdsk and then some hardware diagnostics on the hard drive and RAM to make sure that the material is solid.

  CHKDSK - click here to open the computer. Right click on the hard drive you want to check, and then click Properties. Click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will be prompted, see the disk check for the next time you restart your computer.

  Hardware tests - http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Corrupt user account - if your single administrative user account is damaged (and therefore have what one user account is A Bad Thing), you must log on to the built-in Administrator (disabled by default in Vista) account. From there, you can create a new user account for yourself. In these cases, I prefer not to copy the whole profile to a new way to do not copy the bits corrupt. I prefer a new user account to copy the data (documents, photos, emails, etc.). Here are the instructions to do this. I assumed that you had only an administrative account, then you might want to take a look at the "general recommendations for setting Up user accounts in Vista" at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  Activation of the built-in administrator.

  Method 1. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  If you do not have a Vista installation DVD, you can either make a bootable DVD of Vista repair in the file at this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD.

  After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account.

  Method 2. Or you can use NTpassword to enable the built-in administrator. In both methods, you need third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  http://home.eunet.no/pnordahl/ntpasswd/

  B. create a new user account for yourself and by copying data from your damaged to her user account

  1. you are now connected to the built-in Administrator account. Go to control panel > user accounts and create a new Standard user for your daily work. Let's call it "Sheldon" for this example. Also create an administrator user, called 'CompAdmin' (or 'Tech' or similar).

  4 Ouvrezunesession 'Sheldon' once for profile files are created. Now log off 'Sheldon' and 'CompAdmin '. In "CompAdmin", disable the built-in security administrator. Do this from a command prompt:

  Start > Search > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK to the UAC prompt. Now, you will get the command prompt. Type:

  NET user administrator / active: No. [Enter] and exit the command prompt.

  5. always in 'CompAdmin', you want to open two windows explore side by side. Open computer and navigate to C:\Users\old-corrupted-account. Now, do that again, but navigate to C:\Users\Sheldon. Copy the data from 'old-corrupted-account' on records in 'Sheldon '. Remember your Favorites, bookmarks (if you use Firefox) and by e-mail if you use an email like Windows Mail client.

  6. When you are finished, log in to "Sheldon. All your stuff should be there. When you are sure to have what you need, you can remove the old man-corrupted-account control panel > user accounts.

  General C. recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• How to reset the State of package variables in all sessions connected (without requiring a disconnection and a connect) if they are reset in one of connected sessions.

  
  Hi people,
  Need help, the example requires that the value of packet data 'g_var' must be updated in the session/s connected everywhere without the session/s to be disconnected and reconnected.
  Here's the scenario:

  I created a table my_table having the pair name / value.
  A variable with global package "g_var' in his body and a get accessor method to access g_var variable from the outside world.
  This variable g_var is initialized within the block of the entry into force of the package and retrieves the current value of the variable from my_table.
  When I update the value in the table a trigger on my_table would reset the State of the package and therefore g_var to the most recent value in the same session
  All is well so far since the change in value is reflected in the current session, but if I've already connected session/s
  and I'm trying to retrieve the value of "g_var", it is not updated in already connected sessions and remains the same before the update.
  Can U help please how can I update this value in a session/s connected without having to disconnect and reconnect.
  because if I disconnect and reconect the existing sessions, it seems to show the updated value.

  Thanks in advance.

  Kind regards
  Gaurav Rajput

  Here are the Scripts:

  
  drop table my_table;
  create table my_table
  (
  my_variable_name varchar2 (100),
  number of my_variable_value
  );

  create or replace package my_package as
  Function get_g_var return number;
  end my_package;
  /

  create or replace package body my_package as
  number of g_var;
  
  Function get_g_var return number is
  Start
  Return g_var;
  exception
  while others then
  lift;
  end get_g_var;
  
  procedure init (my_passed_name varchar2) is
  Start
  Select my_variable_value in the g_var from my_table where my_variable_name = my_passed_name;
  exception
  while others then
  raise_application_error (-20004, "I got an error during Init");
  end init;

  Start
  init ('$'); -This is a call to time when the package is loaded into the memory of session
  exception
  while others then
  raise_application_error (-20003, 'Error in my_package');
  end my_pACkage;

  /
  create or replace TRIGGER my_trigger
  BEFORE DELETE OR UPDATE
  ON my_table
  FOR EACH LINE
  declare
  number of my_ret;
  Start
  DBMS_SESSION.modify_package_state (DBMS_SESSION. RESET);
  exception
  while others then
  lift;
  end my_trigger;

  /

  -It is initially set to null
  insert into my_table values ('DOLLAR', 62);
  commit;

  -test value for first time to package loading (62 views)
  Select * from my_table;

  Set serveroutput on

  declare
  my_variable varchar2 (100);
  BEGIN
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  -run the same block of end to start in another session it shows 62. All is well so far
  -check if the value after the update in the same session (shows 38), also check in another before the connected session as well (shows 62 and not 38)
  Update my_table set my_variable_value = 38 where my_variable_name = "DOLLAR";
  commit;

  Select * from my_table;

  Set serveroutput on

  -It displays 38 in this session, but there in an already connected session 62 and only after you log out shows 38
  declare
  my_variable varchar2 (100);
  BEGIN
  -my_variable: = my_package.g_var;
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  Package variables are stored in the private memory (PGA). The value is not visible in the session. A package variable is therefore not approach appropriate to your problem. You can look at in the context of the Application, as Solomon has said.

  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/app_context.htm#CIHFJHCG

• Satellite M30-107 - guard wireless disconnect and never connects

  My Toshiba Satellite M30-107 with Intel (r) PRO/Wireless 2200BG Network connection is not connect wirelessly. I know that there is no hardware problem, because I used this laptop to different wireless networks in the past, and just recently I formatted my laptop using the recovery disk Toshiba gave with it.

  I set up the wireless entering the SSID and network key. But the wireless connects with the Excellent signal is only for a second and then disconnects, then reconnects, disconnects. After doing this for a while, it remains offline.

  How can I do to connect and stay connected as it should?

  It is not easy to say why all this happens. I also think that your laptop works well, then maybe you should check the router. Reboot the router and check the WLAN connection again.

  For a moment turn off WLAN protection and check if the same problem happens without entering the network key.
  Setting router to run on 802. 11 b / g only and check again.

  Play with these settings. Have you bought a new router? I mean if everything was OK in the past I m wondering why you are facing this problem now.

• Cannot open all the files in the drive connected

  Hi, I'm new on connected drive.  I see all my files (pictures, videos, etc.) in the home screen, but when I click on one it wont open.  I just get a "sorry, unable to open...". ».   All files appear also faded.   Thanks in advance for any help!

  Hi @kennybelill ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your laptop HP and problems with the HP drive connected. Here is a link to a document on how to work with the files.

  The other tabs could provide assistance.

  Thank you.

• How I have all 10 files group and are only a .txt file?

  Hello

  I have 10 '.txt' files in a folder, they are part of a single aquivo

  You can get all the files in a folder that contain a certain pace in their name, build an array of text content in a loop and save this content in a text file.

  Ben64

  

• Why users need to disconnect and reconnect to the VPN to RDP?

  Most of the time our VPN works perfectly, but sporadically users must reconnect to the VPN to use remote desktop. Is that the user can log on to the VPN and access to things like network drives, but not other features like RDP. If they disconnect and then reconnect to the VPN, poof, everything works fine. No matter if it is minutes or hours in the VPN connection, it still requires reconnection. It seems that it is always on the second attempt at the nick of this post point called 'the second time's a charm

  We are using RRAS in SBS 2008 and the problem is multiple users tempting to VPN in XP and Win7 machines. We replaced the switches (now using Dell Powerconnects) and the router (now using Cisco RV042) and the problem persists.

  Suggestions or responses are greatly appreciated.

  Hello

  The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• What is the best cleaning of utility software? I want to delete all my files duplicate and unwanted files... Microsoft has a?

  I want to delete all my duplicate files and also unwanted files.
  I'd also a utility to be able to see all my files grouped by type, such as backup software included when you by an external hard drive.

  I would like to increase my system performance.  I tried NoClone online... He cleaned up a lot, but I don't feel confident about obtaining software from the internet.  I went to Micro Center and they told me to get a utility software Performance... I really don't know what to get

  Hello

  Here are several free utilities and they have all their benefits and their methods.

  Auslogics Duplicate File Finder is the MD5 search engine that allows you to find duplicate
  files content, without worrying other matching criteria. It would be useful, for example, when two
  identical mp3 tracks or video files have different names
  http://www.Auslogics.com/en/software/duplicate-file-Finder

  find and delete the duplicate - free
  http://www.easyduplicatefinder.com/
  Versions Installer and Portable

  Search files in doubles or similar - even binary - free
  http://www.Joerg-Rosenthal.com/en/antitwin/

  quickly find all the files in a folder and its subfolders - free duplicate
  http://www.Mindgems.com/products/fast-duplicate-file-Finder/fast-duplicate-file-Finder-about.htm

  Duplicate File Finder software (pictures, mp3, iTunes)
  http://www.Moleskinsoft.com/

  ===================================

  Cleaning utilities:

  CCleaner - free - configurable as well
  http://www.CCleaner.com/

  WiseDiskCleaner - free
  http://www.WiseCleaner.com/download.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Why my Dungeon Messenger disconnect and reconnect? __

  Why keep back my Messenger is disconnected and then reconnected and disconnects constanlty?

  http://www.windowslivehelp.com/forums.aspx?ProductID=2

  They will help you with your question in the Forums above to Messenger.

  See you soon.

  Mick Murphy - Microsoft partner

• virus jumble all my file associations and will not let me reset them... upgrading to windows 7 will overwrite everything on my comp. including viruses?

  The virus is a popup window that said it was a windows xp security 2011.  I tried to end it in task several times Manager, then did a system restore.  After I did a system restore all my file associations were all mixed upward and every sense, I try to change the associations, it won't let me.  It doesn't let me even open system restore or something like that.

  My question is if I install the full version of windows 7 (at the moment I have windows xp) to my computer it also will erase everything on my computer, including virus?  Thanks for any help I can get!

  something special I have to do that if it is a laptop?

  I have a dell xps m140

  I expect BugBatter to answer here... but since it's been several hours and it didn't:

  before considering a change/upgrade of the operating system, you can check if you can solve the problem by following the directions/procedure listed here: http://forums.malwarebytes.org/index.php?showtopic=82696

  before you say it cannot be done, take note of doing things exactly as specified... in particular, I would like to highlight the following points of special 3 which are:

  (1) If you are unable to download MBAM directly on the infected computer, you should download on another computer and then transfer it (via key) to the infected machine.

  (2) given that .exe files does not work on your computer, you will need to Rename the mbam-setup installation file . exe:

  mbam-setup. com:

  (3) Similarly, after installation of the MMFA, you will need to Rename it to mbam. exe for mbam. com in order to run it.

  Keeping these 3 points in mind, go back and follow, step by step, the procedure in the above link.

  NOTE: If Bugbatter here meets the time wherever you are reading this, then please follow all what she said which differs from my suggestion.

• Why all my file extensions have changed ink?

  My computer is almost locked, as all my file extensions have mysteriously changed in INK. I can't do a system restore yet. It's already happened, and I don't remember how I overcame it. Is this a virus? I'm stuck. SOS

  Hello
  Follow the steps described in this guide: http://www.selectrealsecurity.com/fix-programs
  If you have any questions about the instructions, just ask. Let me know if this helps you.
  Brian

• How do you get all the files visible and shareable for the creative team of Cloud?

  Hi all

  My design team small recently signed for the composition of the creative team of cloud. It comes with 100 GB of storage space. As my team is scattered about the geography (two in the United States, one in Australia), we hoped to use this storage space as a way to share files more easily and control version on the joint projects.

  Searching through the help, it seems, however, that you have to select each file individually to share, and then type in an e-mail link. That could become very heavy when downloading multiple files.

  I think that, as a team setting, there is a way to define a default value for sharing on all or some members of the team so that each person can access the files without have to choose each one individually.

  Is this possible? I have the lack somewhere?

  Thank you!

  Currently, it is not possible using the CC file sharing mechanism. You must select the files individually and share them.

• Why all my desktop icons and the start bar disappear, but my document file will pop out every time I have to connect to my computer? but I ady scan my comp. is not a virus...

  I already tried a solution on another site... He asks me to type "explorer.exe" to the new task. but it does not help. the same folder 'My documents' eject too... until I have type 'microsoft word' den that my start bar n desktop icon appear but not the words of microsoft. What really is the problem? Please help me T_T

  Hi micoxmlc0,

  1 - is it disappear and come back after a time or will not return at all?

  Step 1:

  You can try to boot in safe mode and see if the problem persists or not.

  You can check the following link to start in safe mode with networking

  http://support.Microsoft.com/kb/315222

  Step 2:

  You can also check in the new user account.

  See the article:

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Hope this information is useful.

• I moved the strengths that had all the files pdf and image for adobe muse help re connecting them.

  I am creating a site that has more than 100 images/pdf and I don't want to move each of them via the assets Panel is any way I can avoid this and just five record were all the elements are located.

  I don't know exactly what you're asking here but recommended is to have all your images/PDF etc, in the same folder as your .muse file on there, our hard drive.

• All of a sudden a site I visit daily and I have since Firefox blocks symbol rises... Why all of a sudden and I will not allow this... can I remove it

  ? its locking parts of this... and I use it at least 10 times a day and all of a sudden... This symbol of blocking rises

  Hello

  To better help you with your question, please provide us with a screenshot and the address of the page where you are experiencing the problem. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!