Satellite M30-107 - guard wireless disconnect and never connects

Similar Questions

• Satellite M30-107: I/o error and impossible to copy data

  I'm trying to back up my data to DVD blank and I "Draq n drop" software to do as well as other kinds. Insert the blank dvd - R and dvd + R disc, and nothing happens. It does not seem to recognize.

  When I try to open it from the dvd icon this message sometimes "demand impossible because of an i/o device error. I a super multi drive which should read all kind of cd and DVD but something is wrong." I went to my computer and double click on the icon and under the recording tab, I clicked on "Enable recording on this cd player" I dragged then records in the dvd and it seems to have worked, when I inserted the dvd then it doesn't let me open it...

  Could someone help me with this please? I'm not too good with computers and I had it for two years and this is the first time that I am trying to back up my files and I can't do it.

  Thank you very much for your time.
  JC

  Hello

  Drag & drop is not bad bud, I advise to use the software "Nero burning rom" to burn the DVD.
  This software supports many burning options and allows you to burn the middle with best performance.

  Additional you need to know that the player doesn't support not all CD or DVD of all brands.
  In the user manual, you will find a list of compatible CD DVD manufacturers and supported.

  But please don't be confused about the unfamiliar names like IE Mitsubishi.
  Manufacturers and not sellers as TDK. Do not mix manufacturer and seller!

  Best regards

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• Satellite M30-107: WPA and WEP security software

  I want to connect my Satellite M30-107 P - M 745 to a network of wifi MIMO inverters to date.
  I bought a router and a PCMCIA adapter.
  I wish security WPA and WEP setup - I need any special software Toshiba on the PC itself to do so, or simply use the software that came with the router and adapter card?
  Thank you

  Hello

  There is no software Toshiba for the WLAN settings. Toshiba has created the only monitoring software called ConfigFree. By using this software, you can watch the WLAN and LAN connections. This software can also help you identify a connectivity problem if occurs.

  Back to your question: for WLAN settings, you can use the standard Windows WLAN settings or use WLAN data by software adapter settings. Please, make sure the wireless network adapter supports WEP and WPA encryption and also make sure you use the right settings on the router.

• Satellite M30-107: the DVD Supermulti drive burn DVDs?

  I have a Satellite M30-107 P - M 745 / XP HE / 512 MB / 80 GB / 15.4WTFT / DVD SuperMulti / WiFi.

  His CD/DVD player is described as: DVD Supermulti drive compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD-RAM
  Maximum speed: reading: CD-ROM 24 x, 24 x CD - R, 12 x CD - RW, 8 x DVD-ROM, 4 x DVD-R, 4 x DVD - RW, 4 x DVD + R, 4 x DVD + RW, 2 x DVD-RAM / writing: 16 x CD - R, 4 x CD - RW, 8 x HS CD - RW, 4 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM

  Can I use this disc in WRITING ("burn") the DVD and if I can, I need any special software and what type of disc can I use.

  I would use it to back up the laptop.

  Thank you.

  Hello

  Why you ask? You have published the specifications of player and according to these specifications of hardware of the player are able to write on 16 x CD - R, 4 x CD - RW, 8 x CD - RW HS 4 x DVD-R, 2 x DVD-RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM.

  For me it s case. You can write data and files on the DVD s
  I use "Nero burning ROM" software to burn it to CD or DVD. In my opinion it's the best program and very easy to use.

• Function FN keys don't work no-Satellite M30-107

  Hi all

  I have an old M30 - 107 that I recently reinstalled and updated the operating system.
  The function keys control the screen brightness, volume etc. do seem to work.
  I think that I've updated all the drivers for the laptop.

  Is there a specific driver (ie the chipset driver package) I should be looking that control these function keys or should they train with intervention of Ant in a pack driver bios etc. related?

  Satellite M30-107 XP edition SP3

  Thanks in advance... C.

  Satellite M30-107 is a part of the PSM30E series. Is this good?
  You can see this number when you look at the bottom of the unit. There should be a label with the model number.

  Go to the page of European driver of Toshiba and searching for archiving.

  Choose + Archive-> Satellite-> Satellite M Series-> Satellite M30-> Win XP +.

  You must download the * common Module *.

  This common module must be installed first!
  Then, you need to install additional software like Touch Pad on / off utility Hotkey utilities for display devices.

  These programs will allow the Fn keys

• I'cant connect. The wheel continues to roll and never connect. Internet works fine.

  I'cant connect. The wheel continues to roll and never connect. Internet works fine.

  If you are still having the same issue, follow the procedure below and check it once.

  N ° 1)

  Temporarily disable anti-virus and firewall.

  Step 2)

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  Step 3)

  Complete all Adobe processes as creative cloud, CoreSync, AAMUpdater... etc from the Task Manager.

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  It will open the Appdata folder.

  Then navigate to local > Adobe > OOBE. Open the OOBE folder and delete "' Opm.db ' file."

  Once you had deleted Opm.db file, launch Adobe Creative Cloud application and try to connect again.

  Always the same?

  1) go to C:\Windows\System32\drivers\etc and locate the file named Hosts inside the folder etc.

  Copy 2) host of the file to the desktop and open the same with Notepad.

  Check if you can see all Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

• Why all my files disconnect and re connect is no longer?

  Why all my files disconnect and re connect is no longer?

  @

  Hi Meg, thanks for your response. The files were imported from an SD card reader and I worked with them for weeks.

  As of this writing Adobe has reconnected the files automatically, YES! I think what happened was that I unplugged a disc, which was totally unrelated with

  in the project, but it was not properly disconnected. So I guess that Mac did not like this gesture...

• Satellite C50D-A-133 - WiFi disconnects and reconnects immediately

  Hi This is my first post and im hoping someone can help out me.

  I have a laptop C50D-A-133 of the satellite which disconnects my wifi router intermittently and then reconnects.
  What oddly happens too is that it also at the same time drops me ipad and tv connection apple deposited at the same time on the same wireless network.

  Ive been advised that it was a problem with my modem and wireless router

  However after intensive tests is not the case because when I use a laptop alternative on the same wireless network the problem never happens

  It seems that the problem could be down to the network adapter that is an Atheros AR956x the currently installed driver for this is 10.0.0.255

  Can anyone offer help please.

  Best regards

  Mark

  It seems that the problem could be down to the network adapter that is an Atheros AR956x the currently installed driver for this is 10.0.0.255

  I doubt that... why?
  Because you said that this happens to other devices (iPad and Apple TV)...

  I think he might have some kind of incompatibility between the devices and the settings of the WLan router.
  For example: the use of different standard WLan (802.11 A B G N) and/or cipher WEP WLan settings / WPA / WPA2 TKIP AES

  I recommend you to run tests.
  For example, to disable the encryption of WLan and try to connect the devices to open WLan (unsecured)
  Of course, this should only be done for testing purposes.

  Also check the WiFi connection using different WLan standard (as mentioned above 802.11 A/B/G or N)

• Satellite M30-107 - will not power

  Can someone please help?

  I currently have a problem with my M30-107, model PSM30E-7101V-7U, it lights or boot. All I get is the 'sector' and 'Power' light on the façade and the 'power' of light the multimedia button on top, no beeps or noise from the fan.

  One thing I noticed is if I disconnect the HARD drive and turn on the LED of the drive HARD rest turn on, and if I disconnect the DVD player light so that it lights up a second then turns off. Perhaps it is a feature of the model and part of pre-boot BIOS checks - do not know.

  At first I thought it was a fault with the motherboard, so I bought an exact replacement, including the USB ports, AV output, network & modem ports and socket connector DC with PCB power distribution, and even the speakers have been replaced! But it made no difference. Still only get the 'power' & 'Power' LED on.

  Then I tried to replace the CPU, but still the same. I also tried different RAM in different locations, new modem, removed card network wireless and fitted with a panel of media replacement keys - No difference. Disconnect the LCD screen, DVD player and HARD drive does not seem to make any difference either.

  Tonight, I tried capture the wires on the fan and splicing in a new fan using the existing record (I only had a spare with the right connector fan), but that made no difference. I also replaced the battery CMOS with a constant 3v DC supply - but still no luck. He's really starting to annoy me now :-(

  I just finished checking the tension of the PCB power distribution, and it seems to provide the motherboard with a constant voltage. I have ran out of ideas now.

  Everything has been replaced with the exception of the keyboard & touchpad and the CD key and indicator LED Panel on the front of the laptop.

  Anyone has any ideas what to try next? Any advice would be appreciated, I'm starting to pull my hair!

  Could someone also tell me the function of the small black chip that is mounted just below the LDC screen inside the lid of the laptop - part number 040-0004-946 Foxconn. I have not replaced either, but if I knew what it was I could be able to test it.

  Hello!

  Which is really strange, buddy! :(
  Have you tried another AC/DC adapter on this laptop? This is maybe causing this problem and so the laptop can start t properly check it!

  To be honest, I think the best way is you go to an authorized service provider. You need professional help, and the technician can check your laptop to determine the cause of this problem.
  This problem can't be solved in a few minutes, but it should not be a problem for a technician to the laptop.

  Good bye

• Satellite L775D-107 is not starting and black screen

  Hey
  I have a problem with my Toshiba Satellite L775D-107 and I hope you can help me.
  Since yesterday, my laptop displays a black screen. When I push the Start button, nothing happens, but you can hear it is aired but nothing more. a few hours before that I was working on it to Uni and everything was fine.

  I had the same problem a couple of weeks, and I read on the internet that he could help out the battery for 3 minutes and then press F2 and the Start button. Nothing happened, but after 2 hours I tried to start again and all of a sudden it started correctly and worked flawlessly.
  .
  Now I'm having the same problem again and I tried the same procedure but still nothing happens. Always the black screen and just the sound of the air coming out...

  I've got very important documents in United on this laptop, so I hope you can help me.

  Thank you in advance.

  Hey

  My L50 did the same thing. Sometimes, when an another Toshiba is nearby.

  Sombody bnows so this can't be helped?

  Mike

• Satellite M30: Are compatible SD-R6472 and R6572-SD readers?

  Hello

  the SD-R6472 and READERS of DVD - RW R6572-SD are compatible with the Toshiba Satellite M30?

  THX

  Hello

  I put t found additional information on the compatibility of the discs with the Satellite M30.
  But if you want, you can visit the Toshiba site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ONLINE_SHOP

  There you will find options and accessories for several units of Toshiba.
  Check it out.

  PS: You can also try to request the service of Toshiba in your country for details.

• Re: Satellite M30-107 - new compatible CD/DVD player

  Hello
  I need to find the DVD player that is suitable for my M30-107 sSatellite, can someone help me please?
  What is Teac dv-w22e?
  The original was Mat * a dvd - ram uj820s, but do not know where it would be possible to get it from...

  Thank you very much for your help!

  Hello

  (Page 4 to page 7) user manual contains information on the supported players!
  Looks like you didn't she check properly.
  This readers seems to be compatible:
  * UJDA750 *.
  * SD-R6012 *.
  * UJ-811 *.
  * DV-W22E *.

  You can find this number in google to get a...
  Otherwise, you may contact the ASP in your country for this player compatible

• Satellite C660D-10W - 02 wireless broadband does not connect

  Hello.

  I bought a new computer toshiba laptop, its called a Satellite C660D series Satellite C660D - 10W.
  Then I installed the modem 02 top wireless broadband.
  He showed a shortcut for 02broadband on the left side of the desktop.
  So far everything was going perfectly.

  But... then when I double click on the shortcut of 02broadband, 02broadband logo comes as usual, he shows his support for about 30 seconds, but then it says that it cannot detect or unable to connect! I disconnected and then reconnected to broad band several times, but it just keeps saying the same thing.
  There are 3 other laptops in the House and the 02 broadband installed and immediately connected on each of them.

  One of the laptops was just bought 2 hours ago and it installed and connected to broadband right now.
  This laptop from toshibsa is the only one the 02broadband connects not with, but it installs perfectly down to it.
  Its very weird and makes me absolutely nuts.

  Is there anyone else that happened and could it please help?

  Thank you
  brand

  Hello

  There is no module 3G inside the Satellite C660D-10W.
  Did you find the 3G module in Device Manager?
  I guess that you will not find everything and that's why you cannot use the software installed

  This is the reason why it does not work

• How to reset the State of package variables in all sessions connected (without requiring a disconnection and a connect) if they are reset in one of connected sessions.

  
  Hi people,
  Need help, the example requires that the value of packet data 'g_var' must be updated in the session/s connected everywhere without the session/s to be disconnected and reconnected.
  Here's the scenario:

  I created a table my_table having the pair name / value.
  A variable with global package "g_var' in his body and a get accessor method to access g_var variable from the outside world.
  This variable g_var is initialized within the block of the entry into force of the package and retrieves the current value of the variable from my_table.
  When I update the value in the table a trigger on my_table would reset the State of the package and therefore g_var to the most recent value in the same session
  All is well so far since the change in value is reflected in the current session, but if I've already connected session/s
  and I'm trying to retrieve the value of "g_var", it is not updated in already connected sessions and remains the same before the update.
  Can U help please how can I update this value in a session/s connected without having to disconnect and reconnect.
  because if I disconnect and reconect the existing sessions, it seems to show the updated value.

  Thanks in advance.

  Kind regards
  Gaurav Rajput

  Here are the Scripts:

  
  drop table my_table;
  create table my_table
  (
  my_variable_name varchar2 (100),
  number of my_variable_value
  );

  create or replace package my_package as
  Function get_g_var return number;
  end my_package;
  /

  create or replace package body my_package as
  number of g_var;
  
  Function get_g_var return number is
  Start
  Return g_var;
  exception
  while others then
  lift;
  end get_g_var;
  
  procedure init (my_passed_name varchar2) is
  Start
  Select my_variable_value in the g_var from my_table where my_variable_name = my_passed_name;
  exception
  while others then
  raise_application_error (-20004, "I got an error during Init");
  end init;

  Start
  init ('$'); -This is a call to time when the package is loaded into the memory of session
  exception
  while others then
  raise_application_error (-20003, 'Error in my_package');
  end my_pACkage;

  /
  create or replace TRIGGER my_trigger
  BEFORE DELETE OR UPDATE
  ON my_table
  FOR EACH LINE
  declare
  number of my_ret;
  Start
  DBMS_SESSION.modify_package_state (DBMS_SESSION. RESET);
  exception
  while others then
  lift;
  end my_trigger;

  /

  -It is initially set to null
  insert into my_table values ('DOLLAR', 62);
  commit;

  -test value for first time to package loading (62 views)
  Select * from my_table;

  Set serveroutput on

  declare
  my_variable varchar2 (100);
  BEGIN
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  -run the same block of end to start in another session it shows 62. All is well so far
  -check if the value after the update in the same session (shows 38), also check in another before the connected session as well (shows 62 and not 38)
  Update my_table set my_variable_value = 38 where my_variable_name = "DOLLAR";
  commit;

  Select * from my_table;

  Set serveroutput on

  -It displays 38 in this session, but there in an already connected session 62 and only after you log out shows 38
  declare
  my_variable varchar2 (100);
  BEGIN
  -my_variable: = my_package.g_var;
  my_variable: = my_package.get_g_var;
  dbms_output.put_line ($my_var);
  END;

  Package variables are stored in the private memory (PGA). The value is not visible in the session. A package variable is therefore not approach appropriate to your problem. You can look at in the context of the Application, as Solomon has said.

  http://docs.Oracle.com/CD/B28359_01/network.111/B28531/app_context.htm#CIHFJHCG