Why all my open windows minimize when I move another window on the screen?
Hello
What happens is that when I move a window on the screen all my other windows minimize, as this half the window sometimes disappears or appears another window on top.
I am currently running Windows 7, it is aware of the updates. I ran virus checks. Also, I found a way to stop it from happening by unchecking the "use Visual styles on windows and buttons" in the performance options, however my PC should run with this setting is enabled, and it has been for more than a year.
If it helps, here are the basis for my PC specifications:
i5 - 2500 k
8 GB RAM
1 TB SSHD (this is where the BONE is)
HARD DRIVE 500 GB
160 GB HDDGTX 770
OCZ ZS 650W 80 + Bronze
All the drivers are up to date.
Any help is appreciated
Thanks in advance,
Alex
I don't know why I didn't try this earlier but I changed the theme to one of those aero preset instead of one custom I made, has so far prevented the problems I had with the windows tearing and glitching. Im not sure what caused my custom aero theme to cause a lot of problems.
Thanks for all your help!
Tags: Windows
Similar Questions
-
I use Windows 7 and office. MY email account is through yahoo att.net
Could be a hardware problem with your mouse or touchpad.
If you are using a mouse, have you tried to plug in a different mouse?
If you use a Tablet, have you tried to use a mouse?
-
When I use the tab key on my keyboard to try to move between fields on the screen, instead of move the cursor, I have a toolbar that appears in front of the window, showing all my open windows. I don't want to get more, please tell me how to stop it.
Sounds Windows thinks that the Alt key is pressed (yet).
This help if you press all the keys (shift, Ctrl, Alt) state several times?
Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
Question
I do not know how to configure closingFirefox to have all tabs open next time when I open it, without calling to RESTORE PREVIOUS SESSIONTools > Options > general
- Top when Firefox starts: show my windows and tabs from last time
You always bring up your homepage later.
-
How can you reduce all open windows on the desktop the buttons in the taskbar?
How can you minimize all open windows on the desktop to the taskbar buttons
Right click on the taskbar | Show desktop. Or you can add an icon to the taskbar.
How to re-create the show the desktop icon in the Quick Launch toolbar
http://support.Microsoft.com/kb/190355 -
connection problems on hotmail through msn
After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnectingHello richardcatchpole,
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
When I click and drag a window to move its location on the screen does not move properly.
When I click and drag a window to move its location on the screen does not move properly. It leaves a "track" of windows. Whatever the problem is scroll is also affected when the page moves in waves. Why he started to do this, and if someone can offer a solution? Thank you!
original title: "leakage" of windows
It is a common problem with how XP displays the items on your screen. When things get a bit bogged down, you'll start to see trails of the window as you drag. Unfortunately, there is no solution, but future versions of Windows do not have this problem with a new rendering of the graphics system.
-
Windows 8 does someone knows how to get the icon to navigate to the start page? When I move my mouse in the lower left of the Office start page navigation icon does not appear. All of a sudden it stopped working.
Hello
May I ask if clicking on the lower left corner always takes you back to the menu back? Or is that the disabled also?You might want to try this:- Press the Windows key, then type "cmd", right mouse click on command prompt, then click "Run as Administrator". If you are prompted by user account control, just accept.
- At the command prompt with admin, type privileges window ' sfc/scannow ' or ' sfc/scannow ' also works. And then press enter.
- Wait a few moments so he can analyze the system files, you may need to restart then.
Please let me know if it works. I hope this has helped.
-
Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them
Is working this morning!
Depends on your operating system
Go to google, try typing in
Change the Windows permissions
or
Change the permissions of Mac
-
using Firefox 11.0 on Windows 7 prof 64 bit, when trying to 'bookmark this page' in the bookmarks drop-down menu at the top of the browser bookmark pop-up window. When I move my mouse over the bookmark pop-up window to change the directory where you will store the bookmark, it disappears before I can do something? If I move my mouse near the yellow star on the right side of the window to the url, the menu bookmark can appear again, but it disappears when I move my mouse over it?
Hello!
We have seen similar problems in the past. Read this 2-wire and let me know if they help you:
https://support.Mozilla.org/en-us/questions/899098
https://support.Mozilla.org/en-us/questions/850203Good luck
Ibai -
Origin and Windows XP, when I move a window on the screen is there any effect. Now, but I do not know what I changed, a trace remains until the window is in motion. What can I do to avoid this?
Hi James,
Finally I got a good answer on the forum french and Spanish, the process is really easy, but when you do not use this normally, it is hard to remember.
The solution is:
-Right click on the deskboard (the screen). -Properties - appearance - Efects - and then likely or another option.
(Click derecho - Propiedades - Apariencia - effects - y usar o Atenuacion offset).
Thank you for your help
-
How to open photoshop with tools window around the screen?
How to open photoshop with tools window around the screen?
Try this:
I hope this helps!
Julia
-
need help to move a rear window on the screen
rather than reduce a window I was drag to the side of my desktop and accidentally moved completely out of sight. now when I click on the button in the task bar the only options I have are to close the window or move it. When I click on 'move' I get the four-headed arrows near the place, I moved the window off the screen. Can someone tell me please how do I move the window on the screen? Thank you very much.
Right-click on the tab of the window in the task bar and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the desired size. File | Output and Windows will remember the size and location when you open it again. -
HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen
I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.
When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.
I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?
Thank you, Glenn...
It looks like one or more of the boot loader files has been corrupted.
You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that. Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.
The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
When you download this file, it will be an ISO file.
To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick. Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
-------------------------------------
Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
You will probably need to run Startup Repair three times for him to fix all the boot loader.
Once completed, your PC should start OK.If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.
Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/
Good luck
========================================================================
I'm a volunteer and I do not work for, or represent, HP.
---------------------------------------------------------------
If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
If my posts resolved your issue please click "accept as a Solution.
======================================================================== -
Can not start, after the logo window shows the screen empties.
I tried safe mode. When pilots take care it stops a...\system32\drivers\mup.sys crashes then.
Original title: after the logo window shows the screen turns off. I deleted the drivers and now I don't know how to reinstall if I can't see the windows or office. __
Hi Hermmm,
- Who were the drivers that you have deleted from your computer?
- You have the Windows XP installation disk?
Step 1
You can try to boot the computer to the last good known Configuration and check if it helps to start the desktop. To boot to the desktop in Dungeon known, pressing F8 during restart last good Configuration. Once you see the startup option in the last good known Configuration and press ENTER. Check if you can access the desktop.
You can also try to disconnect all external devices except the keyboard, mouse and monitor and check if you can boot to the desktop.
Step 2
If the steps above do not help, you can boot to the recovery console and try to disable the service or the device to the computer and check if it helps you to solve the problem. The links below for more information on how to boot to the recovery console and disable the service and the device in the access recovery console.
How to install and use the Recovery Console in Windows XP
http://support.Microsoft.com/kb/307654How to disable a Service or device that prevents Windows from starting
http://support.Microsoft.com/kb/310602I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Firefox crashes when you try to attach a file to gmail compose
Laptop Vista 32. When you try to attach a file to a gmail account, compose explore dialog and then firefox crashes. Happens every time and began (I think) with the 16 or 17 years old version. Updated plugins, crossed of troubleshooting on the Help me
-
How can I check on my Apple pencil remaiming charge?
-
EliteBook Folio 9470 m - how to create USB recovery in Win7 preinstalled?
Hi, this will be my first post here, so please be gentle I have a new and pretty HP Elitebook Folio 9470 m for the test - it came with the operating system Windows 7 preinstalled. I wanted to check some things, play with it and as a careful user I wa
-
Unable to connect SQL Developer on APEX host Local workspace
Hello worldI'm very comfortable using SQL Developer. I installed Oracle XE 11 g. It included Application Express 4.0 and I downloaded 4.2.3 and manually updated. I have a workspace on the subject called TEST. I was wondering how I could connect to it
-
Workflow code example need to stop the treatment when the violation occurred at the time of booking
Hello!I intend to create our own order workflow in a seeded workflow that will include an activity that stops the workflow itself, if a violation was committed at the time of booking. Violation may be some thing as if the order date is more 10 days a