Why all the sites, even Mozilla, detects my Firefox as an old version when I have the latest version?

Similar Questions

• Why all the icons in the notification area are identical

  Why all the icons in the notification area are identical

  Hello

  ·         What operating system is installed on your computer?

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link and check if he issue persists:

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

  Method 2:

  If the previous step fails, perform a system restore to a time where everything worked well. Follow the steps from the following link to complete the restore of the system:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Also take screenshot of the show and sending the steps us in the link below:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• Why all the emails Outlook express opens at the far right of the screen?

  Why all the emails Outlook express opens at the far right of the screen? I have to take the cursor to the top right of the computer screen, then click to maximize the file so that it opens to the normal size and location. Does not try to 'change' the file to the normal position. Thank you

  Any window that you want to resize all the time must be the last closed window.

  Take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.

• How do I determine that my copy of windows contains all the latest updates, service packs, patches, etc?

  How do I determine that my copy of windows contains all the latest updates, service packs, patches, etc?

  In addition to the updates of Windows, there are some tools to run that will give you all kinds of information on your PC:

  Microsoft Baseline Security Analyzer

  Belarc

• We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

  We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

  Why is your site, not be able to be consulted in current Firefox?

  Firefox 3.0 is now rather old and vulnerable.

  If you must use a version of Firefox 3.0.x for that one site then try the portable version of Firefox 3.0.12. English is near the bottom of the list.
  http://sourceforge.NET/projects/PortableApps/files/Mozilla Firefox 2% C Portable ed. / Mozilla Firefox Portable edition 3.0.12 %2C.

  ^ copy + paste the url above.

  Installs it portable Firefox is autonomous, that it does not touch your version of Firefox or normal profiles for her.

• When I create a desktop/tablet/phone version of a site, why all the pages are blank?

  Hello, listener/user of long date, first time caller

  I use Muse since jumping on the train of creative cloud a few years ago, but so far my experience has been to maintain and update a desktop version of a few small sites.  I liked the idea to help the creation of separate traces of mobile/tablet/Office (ie the delicate design) of Muse, and last week was my first experience using it as I worked on a regeneration of ground-up of the http://www.eridusociety.org.  I started with a presentation of the phone, with the intention to get this right and then expanding outward to a version of the Tablet, and once it was over, adding a provision of office.

  After completing the mobile site and test it on Business Catalyst (thanks to all those involved in this seamless integration, by the way), I clicked on the + tablet button and began to build on the presentation of the tablet of the site.  To my dismay, all the pages he built were empty.  I tried to remove and re-doing with different combinations of the options checked, does not.  Then I ran out of the web browser the closest and began the search - probably, I missed a step, or the collective brains of the internet could alert me on a way to do this.  Alas, no luck.

  White pages are intentional, and how to fill these blank pages is to return to the configuration of the phone, open the page, and then copy all of the content, then switch back to the presentation of the Tablet and open the corresponding page of the provision of the Tablet and paste the contents of the presentation of the source... and of course, rinse and repeat for both office layout (but for my workflow I copied pages of) available Tablet finished to create the desktop version).

  For me, from all elements of the presentation of the source page is much easier than from scratch on every page.  In this way, I know I have everything page and I can add to (or subtract) as well as change the page layout to fairly short term.  I was driving me crazy with all bounce back between the layouts to copy/paste of what I'm working on my site, and for later use, I would like to know if there is a way that can be avoided in the future?

  Ideally, I would like to see an option in the page Setup dialog box to create in order to copy the content (and choose the layout of the source to be copied from).

  Also, another great option for this dialog box would let me choose to spend all the page links to the new provision.  In other words, when it copy and glue all the content of the presentation of the source page, Muse would then also update the links to the pages on the site so that they link to the pages of the presentation.  So when I create a version of the phone, then click on + Tablet, I can check a box to copy content from the source page, specify the source and then another box to update the links to the page layout.  After Muse does its magic, I have a provision of the tablet which already has the content of the page on this subject, and this is the link to other pages on the presentation of the Tablet (and not available to source/phone pages).

  Thank you to all the team members of Muse for a large enough product and the people manning the Twitter account to answer my tweet and direct me here.

  Reactive Adobe Muse CC 2015 is now online. Please install the update of CC > Apps.

  What's new: news summary

  Release notes: https://helpx.adobe.com/muse/release-note/adobe-muse-release-notes.html

  Delicate design:

  Adobe help Muse | Create responsive Web sites

  Adobe help Muse | Responsive web design in Adobe Muse

  Adobe help Muse | Migrate existing Adobe Muse Web sites to answer

  Tutorials

  To get started with Adobe Muse (replaces how to make a website with Adobe Muse (coffee of Katie)):

  - https://helpx.adobe.com/muse/how-to/create-responsive-website.html

  Create a sensitive webpage with Adobe Muse:

  - https://helpx.adobe.com/muse/how-to/responsive-web-design.html (more detailed features RWD of Muse demo)

  Thank you

  Sanjit

• Why all the mini-usb Chargers don't work with my pre! Grumble, boo-hiss...

  I forgot to take my charger with me for what was supposed to be a quick trip.  After many postponements, flights cancelled, calls for the family and a 'help' of the airline office... I noticed that my battery was low so I decided to buy a charger at the airport.

  Here comes my problem with my Pre and Palm...

  1st stop, I have overall love this phone and understand that a new version can not have all the features I want/need.

  What I don't understand, is why any mini-USB charger does not work!

  I visited a few shops and kiosks where NONE of the generic Chargers would work and they did not offer Palm products.

  I've certainly limited technical knowledge these things here, but can someone please explain to me why there are standards (USB, Mini-USB, etc.) but Palm makes their mini-usb special requirements or unique so only some products work?

  I have used several brands and everybody has worked so far for me. I have even a mini - mic adapter that adapts to any standard mini-usb and works fine.

  Just to clarify, you said you have mini-usb, the pre uses micro usb.

  Micro-usb is also going to be the standard.

  http://www.Engadget.com/2009/02/17/GSM-Association-sets-2012-target-date-for-universal-cellphone-ch/

  Message edited by tagz on 09/30/2009 15:48

• Why all the bad reviews of el capitan?

  Why all this negative opinions on El Capitan?

  In General, you should always pass to the last possible system like you meet the specs for, as long as you do not have "must have" applications that do not meet specifications. The idea that the updates/updates cause problems is probably derived from discussions that see you here. ASC is like an emergency room for people to have problems, especially the sick, those who come here. Hundreds of thousands of people pass without difficulty, never here and go merrily on their way. In addition to the improved features, updates/improvements important security fixes.

• Why all the results are duplicated when searching in my bookmarks library?

  If I search for "Shell", for example, and then click on the 'name' column, most of the 'results' are duplicated. For example, "Perdido | On Shell"in the"shell"folder Parent is shown twice... same URL and al. I see that the or after the 01/02/2013 added bookmarks are NOT duplicated.

  In my case, the bookmarks ARE actually duplicated. I checked by exporting and by analyzing the HTML code.
  The whole "All bookmarks" hierarchy had somehow been copied into a random location of my favorite tree. This is why all bookmarks except most recent lie twice.
  It looked like this:

  - All Bookmarks
    + Bookmarks Toolbar
    + Bookmarks Menu
       + MY_FOLDER_A
       + MY_FOLDER_B
       - MY_FOLDER_C
         MY_NESTED_FOLDER_A
           - All Bookmarks
              .... older state fully duplicated!!!
  

  I deleted the nested copy of "All bookmarks" and it seems OK now.
  I made this copy by mistake (which I highly doubt) or a bug caused.

  Good to hear that you are not using Firefox Sync (I use it). It would have been a Prime Minister candidate for causing a problem like this. (My bad favorites have been replicated to all of the computers connected with synchronization).

  The copy of "All bookmarks" should have been made over the past months, but I couldn't determine exactly when. The copies have the same ADD_DATE and LAST_MODIFIED timestamp in the HTML file.

• Why ALL the links to a page "server not found"?

  This problem is ongoing on all computers I own (6 in total) and all have parameters different and others - so no, it's not my problem.

  From this link no response
  https://support.Mozilla.org/en-us/questions/767320

  You can see that the problem has been around for OVER a YEAR and still no Firefox address.

  The problem is as the title implies, a server not found error message to display EACH link I click and I have to click "Try again" repeatedly get the page to load.

  It gets really annoying after typing a long answer and clicking the button send to have to retype everything because of the BS 'server not found '. I'll try to go back this post every day until measures are taken. I must learn to copy everything I type in which case the page does not load.

  Finally found something that works!

  Step 1: Uninstall Firefox
  Step 2: Start internet explore
  Step 3: Download the fact that IE sucks green weenies
  Step 4: Enjoy as a result of all the links that you click actually LOADS A PAGE.

  No more clicking on 'Try Again', thank God.

• Why all the additional ads are added to the App updates?

  For IOS 9.3.1

  I also upgraded the application to the 'Dictionary of Meridian', and this update takes the screen with advertisements, as before.  Even at the point of a full page ad.  I would go back to the version back, but I can't?  It seems that all the App updates are not just improved to fix bugs?

  It would be a complaint directly with the supplier of app. But no, you can't downgrade to an earlier version. You may want to consider another approx. many dictionary are available.

• File navigation on OS x using openDlg() - why all the folders are grayed out?

  I am configuring a file and folder browsing dialog that works for the two Win/OSX and with filters to narrow the search to specific file types dialog box. I received a lot of help from another user on the forum (Matias Kiviniemi) in order to obtain the function of filter working - but now I have another problem: a little strange.

  When you browse the files under OSX, all the folders are greyed out!

  You can always navigate (somewhat) via the Favorites list and directory tree button at the top in the Center, but actually clicking in the records does not at all.
  
  

  I also tried saveDlg() to browse the files, but I have exactly the same problem with greyed out records. SaveDlg() is not the second parameter (the filter function) to restrict the dialogue to a specific file type - which is something that I need.

  // Utility functions for checking if the OS is Win/OSX
  function isWindows(){
      return app.systemInformation.indexOf("Operating System: Windows") >= 0
  }
  function isMac(){
      return app.systemInformation.indexOf("Operating System: Mac") >= 0
  }
  
  
  // All params below are strings
  function promptFile(dialogMessage, dialogType, extFilter, oldPath){
  // Description: Opens up a file or older dialog window for browsing (Win/OSX)
  // Returns: Absolute path (string) to the file or folder that was picked by the user
  
  
      // File
      if (dialogType == "file"){
  
  
          // Create filter function for the File.saveDlg -function
          var filter = null
          if (isMac()){ // OSX
              if (extFilter){
                  var filter_regex = new RegExp("[^\.]*\."+extFilter+"$")
                  filter = function (file_entry){
                      return filter_regex.test(file_entry.name)
                  }
              }else{
                  filter = function(){ return true } // All and any file(s)
              }
          }else if (isWindows()){ // Win
              if (extFilter){
                  filter = extFilter.charAt(0).toUpperCase() + extFilter.slice(1)+"-files:*."+extFilter
              }else{
                  filter = "All files:*.*" // All and any file(s)
              }
          }else{
              filter = null
          }
  
  
          // Create file dialog
          var path = new File(oldPath);
          // var dialog = path.saveDlg(dialogMessage, filter); // Same kind of error with saveDlg
          var dialog = path.openDlg(dialogMessage, filter, false);
  
  
      // Folder
      }else if(dialogType == "folder"){
          alert("folder diag:\n" + oldPath);
  
  
          // Create folder dialog
          var path = new Folder(oldPath);
          var dialog = path.selectDlg(dialogMessage);
          while (dialog.alias){
              dialog = dialog.resolve.selectDlg(dialogMessage);
          }
      }
  
  
      if (dialog){
          return dialog.fsName.replace(/\\/g, "/") // Back to Front slashes
      }
  }
  

  I'll cross post since my last response to the other crossed the moderation and released after you posted this (and it is relevant for this topic)

  There seems to be backup dialog boxes _SEVERAL_ versions

  • file_entry.saveDlg (): file_entry content is the default value, but do not know if he has locked her
  • File.saveDialog (): same as file_entry.saveDlg, but none value of screening. Maybe it is not locked to original dir
  • folder_entry.saveDlg (): looks identical to file_entry.saveDlg, do not know if there is a difference.
  • Folder.selectDialog: seems more versatile, "simply to choose a file.

  You probably just do some trial and error to choose one that fits, what are the rules everyone has. So far I think Mac has no option for "create a new file, but only this extension." Extension filter only seems to apply to existing opening and win (although even there, he hides just, you can actually set different extension in her typing).

  Confusion between the part which is the "grayed out of all cases" it would imply in fact wants the filter even though the docs say it is not. I.e. you'd need to do a filtering function that accepts two folders or files with right like below (not tested)

  filter = function (fileSystemEntry) {}

  If {(fileSystemEntry instanceof file)

  Returns true

  } else {}

  return filter_regex.test (fileSystemEntry.name)

  }

  }

• Help! Why all the text in my changes just went missing?

  From one day to the next my file suddenly doesn't seem to include all the changes I made in PDF - in the case of destruction (in blue) with a substitution (although I saved all changes are all missing in the relevant boxes). Help!

  Hi - 2015 version, Version 007.20033

  I made comments and they were not lost. But two other things happened, and I think that know why. (1) for anywhere, I deleted and added text, the deletion was upheld, but the addition was empty. (2) anywhere, I added text was lost.

  I went for a while to preview because it has a search function of different or better, and the document from an extract of registration causes these specific types of losses.

  A severe headache!

• Why all the new features do not appear when I upgraded from 3.6.15 4.0?

  I upgraded from 3.6.15 4.0, but the appearance of Firefox has not changed at all. There is no Awesome Bar, Firefox Button or bookmark button. The only change was 2 of my addons have been disabled.

  The new interface is the default on Windows Vista and Windows 7 only. To get it under Windows XP, you must hide the menu bar. Do, in the view menu, select Toolbars, then click on the entrance to the "Menu bar".

  If you need to access the menus, you can press Alt or F10 to display temporarily.

• Why all the elements of the array does not appear?

  Hello

  I'm learning about the handling of tables.  The example finder includes this one, 'build array_forum.vi', which shows the two modes, concatenate and adding, I understand, HOWEVER, I can't understand how they built this vi.  For example, I can find the Array function to build, but I do not understand how they created the "digital data table 1" "data table 2" digital... etc, and I can't find the functions on the pallets that cause display "build the CONCATENATE entries table". ".  Where are these blue functions?

  Where these functions are found in the palette, and how we build them like that?

  The other vi indicated here, 'for loop array_forum.vi' is my attempt to reproduce, but it doesn't show all the elements of the array; However, it only displays a SINGLE element, the last element of the array.  How can I view all the items in the table I am creating using the FOR LOOP?  I am doing something wrong with the LOOP FOR?

  Thank you

  Dave

  Right-click your scoreboard, uncheck the "Display as icon" and see what happens.  There are two ways of viewing terminals, most of us like the simple point of view, the default value is the display of the icon.