Why am I getting messages of "not responding"?

Similar Questions

• Why do I get message not delivered on my SMS

  Why do I get message not delivered on my SMS

  Because they were not delivered for some reason any!

  Make sure that you connect to your cellular network (if you are using SMS), and that you have a data connection as well (if you use iMessage).

  In addition, call the intended recipient and ask that they check the same.

  You can also turn off and on your phone.

  Then test some messages.

• Why I get "pages do not respond" in google chrome?

  Original title: completely fed up

  Why I get "pages do not respond" in google chrome?

  Hello

  You must check with their forums and Google Chrome support.

  Support for Google Chrome
  http://www.Google.com/support/chrome/

  Google Chrome forums
  http://www.Google.com/support/forum/p/chrome?hl=en&utm_source=HC&utm_medium=LeftNav&utm_campaign=chrome

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I've already converted to Skype, so why do I get messages to do?

  I've already converted to Skype, so why do I get messages to do? I already have the latest version of Skype. Can't tell you when someone has already converted to Skype?

  Contact customer service

  TIME ZONE - US EAST. LOCATION - PHILADELPHIA, PA, USA.
  
  I recommend that you always run the latest version of Skype: Windows & Mac
  
  If my advice helped to solve your problem, please mark it as a solution to help others.
  Please note that I usually do not respond to unsolicited private Messages. Thank you.

• Why do I get "Message Agent wants to use the"login"keychain and how to stop it and 7 other bunch of connection."

  Why do I get "Message Agent wants to use Keychain 'login' and how to stop it and 7 other bunch of connection points most every time I login?

  Hey Roman man,

  I understand that you see a prompt for your login keychain. I can't anymore how do I fix this.

  Now if you have recently changed your password for your Mac, then the password for your keychain will need to be updated. You can make this change in the Keychain Access application. If you do not know the password, then you need to reset the password in the keychain. Take a look at the article below for specific details get this sorted out.

  If your Mac keeps asking for the password in the keychain
  https://support.Apple.com/en-us/HT201609

  Take it easy

• I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

  I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

  Hello golden2,.

  I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

  Please, try the procedure described in this article using the disc is ejected.

  Get help with the SuperDrive slot on your Mac - Apple Support loading

  Do not eject discs or discs eject slowly

  1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
  2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
  3. If the disc does not eject, try dragging the icon of the disk to the trash.
  4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
  5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
  6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

  Take care.

• When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

  How to fix error code 105-100003

  I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

  Hi, Jimmy.

  Make the printer and model would be useful.  Thank you.

  Try the following:

  If your printer is connected via a wireless network:

  1. Make sure that your printer is turned on. (Start button / stop is turned on).
  2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
     • If the blue wireless LED flashes, your printer is not connected to your router.
     • 1. Follow the steps in the configuration of wireless network Guide (named the network installation Guide, if your printer has Ethernet printer capabilities) to connect your printer to your router.
       2. If you are unable to connect the printer to the router:
          1. Turn off the power to the router, and then turn on the router
          2. Follow the steps described in the [wireless] Network Installation Guide once again.
          3. If necessary, see what should I do if I can't configure my all-in-one printer (including the connection of wireless configuration)?
  3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
     • If the error ' printer does not "occurred while you have been setting up the printer:
     • 1. Open Software Center.
       2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
       3. Follow the on-screen instructions to set up the printer.
       4. Try to use the printer again.
     • If the error occurred after you completed the roll-out of your printer from Home Center Software:
     • 1. Make sure that the print queue is online.
       2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
       3. Click on your printer.
       4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
       5. Try to use the printer again.

  If the error persists:

  1. Remove the printer from your computer.
     1. Select start > settings > printers and faxes.
     2. Right click on your printer, then click on remove.
  2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
     1. Select start > Control Panel.
     2. Double-click user accounts.
     3. Click turn user account control on or turn it off.
     4. Select the check box use user account control.
     5. Click OK.
  3. Configure the printer again.
     1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  4. Try to use the printer again.

  If the error persists:

  1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select Disable.
     5. Click OK.
     6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
  2. If you configure your printer, run the KODAK printer setup utility.
     1. Select start > programs > Kodak > KODAK Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  3. Select the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select automatic.
     5. Click OK.
  4. Try printing from the center of renovation again.

  If the error persists:

  1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.
  
  NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
• Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
• Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.

NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

If the error persists, contact us.

http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

• Why do I get messages saying that I have not destroyed tabs; I ususally click on the red dot. why I get this error message?

  In the past I could navigate from one site to another without closing a tab. The messages now appear that say I have does not close a tab and need to close or to restore. I tried closing of tabs as I've used them but my tab bar shows no tabs open when I close Firefox. When I restart Firefox I get messages saying that I did not close the tabs! It's very annoying. How do I put it back for when I click the red dot, it is closed. and when I restarted Firefox it just goes to my home page? I use a Mac 10.6.8

  No, there is no problem now with this parameter when the bug is fixed.
  the problem is basically firefox 20 wrong classifies this way to close the browser as an accident & will launch the restore function of session at the next launch of the browser. the key to everything: config above completely shuts down service sessionrestore for accidents.

  Once the bug should be fixed in firefox 21, I would recommend resetting browser.sessionstore.resume_from_crash back to its default value "true" If, so that you get the benefit of a restored session, where firefox crashes really some time.

• I'm organizing "my images" subfolder of the "my documents". I get constantly one "not responding" who will be unhang after 5 to 10 seconds.

  Original title: my pictures "not responding".

  I'm organizing "my images" subfolder of the "my documents".  I constantly get a "not responding" (when I look at the Task Manager to see why he is suspended) which will be unhang after 5 to 10 seconds. It's very frustrating because I do not organize the photos in any case.  :)  I've read enough to try the "boot in safe mode" and see if the problem is still involved.  I did this and did not get the error in safe mode.  The challenge is that you can't do 'film' in safe mode, only the photos.  I run a symantec update complete and found no errors.  Problem when 'my documents' is the only program that I opened.  I completely rebooted, that doesn't work anymore.  I have also defraged and that did not help.  I really want to get the kids pictures together for Christmas, please help.  -Dawn in Texas

  Hello

  1. have you made changes on the computer before this problem?

  Try to perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on Startand then click run.
  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Why my FireFox went painfully slow/Not responding since the last update?

  Since the last update Firefox doesn't want to just not worked for me, most of the Web pages take 20 to 30 seconds to load, and often it will simply not respond and take a minute to load, and when he does have a script error that for google images will forget this topic well in 2 minutes after the message not responding is finally going to my brother also uses Firefox and his works perfectly fine, I disabled all addons and it's the same thing. If I use another browser (Chrome) is super fast, I tried a few suggestions for other positions like firefox high priority and such there is little difference if all don't please makeme use chrome

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Why doesn't MS MediaPlayer will not respond when I try to open the ITI

  Media Player does not respond when I try to open it

  Hi Paquicito,

  1. what operating system is installed on the computer?
  2. don't you make changes to the computer before the show?

  Ry Tthe steps from the following links:

  Solve the problems of Windows Media Player video and other media or library
  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Windows Media Player stops responding after you install a third-party product that registers its own version of the Wmp.dll file
  http://support.Microsoft.com/kb/947541

• try to download silverlight (kb2416427) get message may not download? What is it & why do I need? Keeps popping up!

  I don't know what silverlight is & why I? Should I get this downloaded, or can I uninstall this?

  Hi my computer,

  1. What is the error message that you receive during the installation of this update?

  2 are you able to install all other updates?

  Silverlight is a powerful development platform for creating engaging, interactive user for Web experiences, desktop and applications when online or offline.

  I suggest that you manually download and install the latest version of Silverlight 4 and check if it works.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why do I get constants and not desired 'Update available for Acrobat DC' messages on boot to the top?

  I have the full version of Acrobat Pro installed and authorized on my computer, but I don't want anything to do with the "Acrobat Document cloud"!

  But whenever I boot, I get a message saying "Update available for Acrobat DC".

  

  That this has something to do with the fact that I have installed Adobe Creative Cloud?

  I was must have installed when I subscribed to a monthly subscription of minimum cost for Photoshop CC.

  But I never wanted anything to do with all the features 'cloud' regarding Acrobat Pro.

  How can I make these messages stop appearing?

  Autochthon I had this issue for months and called / chatted with Adobe. Their attitude is that "Acrobat has different structure of program developing the other CS 6 products, it's the reason why it shows as update".

  I explained that it would obviously be my Acrobat X Pro, because he wants to "Refresh", and it should show as 'try' like other applications. I have Illustrator and InDesign CS6 installed with my photography CC program. These applications show that previous Versions, with related CC showing Versions as "try." The final message from Adobe has been 'since you don't have Acrobat X Pro, please ignore this update on the application of CC desktop '. Is more difficult, because I do need to update the CC apps I installed one at a time, avoiding the option Update everything. I also had to disable the Notifications of OS Desktop level for the application Adobe CC.

• I got 40 Firefox and I'm on the beta channel - why do I get messages saying that my browser is not updated?

  I've been on the beta channel for centuries and have found this problem for some time. Many Web sites meet that my browser is not up-to-date, as the Mozilla site done before asking this question, but when I check updates the answer is always that the browser is up-to-date.

  Why?

  Hi larssonswood, this is caused by the masking extension agent you have installed.

  Disable or remove modules

• Get the program "not responding" error message

  get the program does not

  Hey jessejender

  Well, this may be due to 2 things:

  1. you don't have enough RAM to run all the processes on your system, you must add more RAM.

  2. you have viruses or worms currently running on your system, you will need to install a program antivirus or scan your system with the MRT (windows malware removal tool), to run it, open the system32 directory in the windows folder, then search for MRT, first, run a quick scan, if you find something, then you should run a full system scan and it may take some time. Note: It is recommended if you have updated the tool before running it.

  Hope it is helpful