Why Apple did remove the ability to change fonts and activate the mode night in ePub created in IBA?

Similar Questions

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why Apple music removes the already downloaded songs

  When I try to read an album I downloaded already it will pop the whole album to go to next songs on the playlist. Why does do that if I pay for the subscription?

  Data of Mobile (cellular) Try out for music from Apple in the framework > Mobile section and framework > music.

  Close the music application

  Go to settings > music

  Disable the library music icloud

  Go to settings > Itunes & app stores

  Disconnect from itunes

  Wait 3 minutes

  Log in to Itunes

  Return to settings > music

  Turn on icloud library

  Reopen the music app

• Why Apple did remove S.o.s. keychain?

  What do we do if we have problems with Keychain now? How can you fix a keychain without Keychain first aid in Mac OS X El Capitan 10.11.4.

  There is no s.o.s. keychain more. You can't do a repair. I guess that the system now takes care of it automatically.

  They have also ruled out utility repair disk permissions.

  I think they took because of some security issues with it.

• I send email to different contacts in different groups. Apple has removed the old symbol of head and shoulders to select contacts. The new system if possible he's so screwed you cannot understand it.

  Apple has removed the symbol of the head and shoulders of e-mail that was used to select contacts. Very very easy. Now, it's so complicated on my new macbook, it is impossible to understand how to select several contacts during transfer or composition. Groups for me is not the answer.

  I'm not sure that I understood what you're asking, but you select several contacts in Contacts.app in the standard way. It is to hold down the ⌘ (cmd) key while selecting them with the mouse clicks. Then drag the names chosen for the To: field of the message.

  C.

• When you search our office location, 700 N. Pearl Street Dallas, Apple cards removes the PIN in a location 12 miles away.  How can this be corrected?

  When you search our office location, 700 N. Pearl Street Dallas, Apple cards removes the PIN in a location 12 miles away.  How can this be corrected?

  In the lower-right corner, click on the 'i' and select report a problem.

  It takes time, but the problem should be solved after as they verify the information.

• Why Microsoft has removed the WMI Code Creator from downloads V1.0? It is an amazing tool.

  Why Microsoft has removed the WMI Code Creator from downloads V1.0? It is an amazing tool.

  Why Microsoft has removed the WMI Code Creator from downloads V1.0? It is an amazing tool.

  It's no big deal. When you type the phrase
  Download wmi code creator
  in the text box of a search engine then you have a lot of alternatives, for example one below. You have to be a little flexible.
  http://download.CNET.com/WMI-code-creator/3000-2229_4-10731137.html

• Why do they play the widesceen films etched to create dvd windows in narrow image mode

  Why do they play the widesceen films etched to create dvd windows in narrow image mode

  Why do they play the widesceen films etched to create dvd windows in narrow image mode

  ==========================================
  A few thoughts... good luck...

  It might be useful if you set DVD Maker 16:9 before you import
  the source files. If this does not help... you could try to prepare the
  project in Windows Live Movie Maker (choice of widescreen).

  The aspect ratio seems to work in creation of DVD so better the
  video source is in the. WMV format.

  The following article might be worth a visit:

  Windows 7 - Windows DVD Maker Widescreen Workaround
  http://www.pcmech.com/article/Windows-DVD-Maker-widescreen-workaround/

• change font and font size in all text fields

  Hi, I want to change font and font size in all text fields. I tried under the code, but it changes the font size but has not changed the font. can u pls help me. Thank you...

  Police - Courier New

  the size of the font - 10

  Loop through the fields in the document

  for (var i = 0; i < numFields; i ++) {}

  Get a reference to the current field

  var f = getField (getNthFieldName (i));

  Change the properties of certain types of fields

  {Switch (f.type)}

  case 'text ':

  f.textFont = fonts. Courier New;

  f.textSize = 10;

  }

  }

  You have a good reason to want to use Courier New instead of the built-in Courier font? In all cases, you must change one line to:

  Use the built-in font Courier

  f.textFont = fonts. Court;

  -or-

  Use the Courier New

  f.textFont = "CourierNew;

• Why apple did stop their 'material' servers?

  Why apple not stop their servers 'material' software, I understand that it is always available in the app store.

  It was not a deal that worked for them. Form Apart the Xserve (who they have stopped selling in 2011) all the other servers were simply ordinary Mac OSX Server.

  As you say, you can update osX to the alternative server for just £15.

• How to remove the default 'Contours' text when creating forms of vector layers?

  Hi all!

  You know the text, it adds to the layer name when you create forms of a vector layer who says the contours? Well, someone knows if it is possible to change it or remove it?

  It sucks to have to remove it manually, especially when there are a lot of layers and you took the time to prepare them in illustrator.

  Thankss,

  Oliver

  So the answer is no, there is no way to automate this process. There is no rename the lot for layers in AE, Illustrator, Photoshop, In Design or any other application I've ever used and that has layers.

• Why did remove the option "organize bookmarks" in the top menu bar. I hate the bookmarks bar - he did organize my favorites more difficult instead of easier.

  I have more trouble to organize my bookmarks in a sidebar. I want an entire page to work with like in FF3. Also, when I tried dragging the bookmarks in a folder in the sidebar, she also copied the bookmark and I had to then delete the copy. More work instead of less. Is it possible to get to organize back bookmarks on the page top Favorites menu?

  It is always there, it was renamed. "Organize bookmarks" has been renamed to "show all bookmarks" in the bookmarks menu.

• When I deleted a picture of my MacBook, why it also remove the external hard drive?

  So I tried to help my wife to free up space on his MacBook Pro by putting all of his photos on an external hard drive. After iPhoto slide the hard disk and wait 40 minutes so that he could transfer, I wanted to make sure it worked. I ejected the disk and then plugged in. Of course, all iphotos were still there. Just to be sure, I deleted one file in the folder on the computer's iphoto. I went to my shock and horror, the external hard drive, that it has been deleted it too! How is that possible? I've been scouring the Internet trying to retrieve this file with no luck. It was not in the trash. There is a tab "recently deleted". Time machine was not turned on. iCloud shows nothing. I can't download any software, because the computer is completely filled. How is it possible that by deleting this folder on the computer he did also leave the hard drive? AND it has not been saved in the trash? I have used PC, and whenever I need something in return, he was ALWAYS in the trash. And if I deleted something on the computer with an external hard drive connected, it would NEVER be removed from the external hard drive at the same time. I'm so frustrated and feeling SO bad that I deleted a folder with important pictures of our kids. Is that what I can do to recover the pictures? Any help is greatly appreciated.

  You used Time Machine at all? I see you say it was not on, but it never on and is at - it a backup Time Machine on the Macbook Pro?

• Why can't remove the table?

  I find a table under soctt Solaris 11g, named BIN$ dnz9wkbnQZaxdctGcob3RA == $ 0, as follows:
  SQL > select * from tab;
  
  TNOM TABTYPE CLUSTERID
  
  BIN$ dnz9wkbnQZaxdctGcob3RA == $0 TABLE
  BONUS BOARD
  DEPT TABLE
  EMP TABLE
  SALGRADE TABLE
  
  I do not know when the table created, if I want to delete the table, can I use following command:
  SQL > drop table BIN$ dnz9wkbnQZaxdctGcob3RA == $0;
  drop table BIN$ dnz9wkbnQZaxdctGcob3RA == $0
  *
  Line 1 error:
  ORA-00933: SQL not correctly completed command.
  
  Why I can't remove this table? How to do?
  Thank you

  Handle: EdwardKing
  Status level: Beginner
  Join date: 27 May 2002
  Messages total: 61
  Total Questions: 24 (24 remaining)
  so many questions without answers ANY .
  :-(

  http://forums.Oracle.com/forums/Ann.jspa?annID=718

  Why I can't remove this table? How to do?

  When a table is dropped, it goes in the TRASH; It may therefore be FLASHBACK.

  What you're trying to DELETE a table already in the TRASH; is NOT authorized.

  When all else fails, read the Fine

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28310/tables011.htm#ADMIN11682

  Published by: sb92075 on February 11, 2011 17:47

• Why TCP tunneling removes the 503 of the asynchronous call WS http response?

  Hi all
  
  I am facing a weird problem.
  I have developed and tested an asynchronous BPEL process which, among other things, invoke a 3rd party web service.
  It works very well in the development environment.
  When I migrates to the test environment for clients, I get an error http 503 in the BPEL process (the only difference in the BPEL code is WS endpoint).
  Try to understand what happened, I used a tunnel through TCP monitor. This solves the problem!
  
  So why go through a TCP control running using the BPEL server?
  Continuing with TCP monitor in production is obviously not an option, so not only that I have to understand why using a TCP my help, but also find a way to fix the underlying issue.
  
  I should mention that I use BPEL version 10.1.3.3, and I've tried the connection between the BPEL server and 3rd party web service and not a problem.
  
  Any help is very appreciated.
  Kind regards
  Aagaard
  
  Published by: Aagaard on March 23, 2009 09:48
  In Metalink in "TCP Tunneling the Oracle BPEL Process Manager" (283484.1 document id) it is proposed to change the ownership of the 'opt-SOAP-shortened' in the 'Manage BPEL domian"from false to true if you want to use TCP tunneling.
  I don't see this property in the BPEL console or in the domain.xml file in $ORACLE_HOME/bpel/areas / < used domain > / config.
  This would be part of the problem?
  The BPEL server in the customer test environment is a clone of the BPEL server in our development environment, so I don't see how this could be the problem.

  Just to think logically, he cannot be firewall as SOAP communicates vi the http remote server port. It has nothing to do with the installation of BPEL.

  19313 should be only one communication port.

  The main thing to look at is TCP LUN act as a proxy in some way? My understanding of the app is there's some monitors.

  Also when you test the browser have you disabled all proxies?

  As mentioned above the HTTP503 establishes a connection, but it is unable to complete for some reason such as timeout, which could have been caused, but load.

  see you soon
  James