Why TCP tunneling removes the 503 of the asynchronous call WS http response?

Similar Questions

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why Microsoft has removed the WMI Code Creator from downloads V1.0? It is an amazing tool.

  Why Microsoft has removed the WMI Code Creator from downloads V1.0? It is an amazing tool.

  Why Microsoft has removed the WMI Code Creator from downloads V1.0? It is an amazing tool.

  It's no big deal. When you type the phrase
  Download wmi code creator
  in the text box of a search engine then you have a lot of alternatives, for example one below. You have to be a little flexible.
  http://download.CNET.com/WMI-code-creator/3000-2229_4-10731137.html

• How to remove the white space between two response reports

  How to remove the white space between two response reports
  
  In the section of dashboard, I have 2 rqeuest. Each query returns Table view. When I view the dashboard, it shows a blank separating 2 table views. How can I get rid of the band of white/white space?

  See this link

  Re: Remove the space between the two reports on the dashboard page OBIEE Section

  Kind regards
  Sandeep

• LabVIEW executable not feasible using the asynchronous call

  Hello

  my project works very well from the source, but fails to run as an executable file. I was able to follow him to the asynchronous call of a VI.

  

  So far, I was able to solve the problem by using a queue dummy and loops in order to start the VI parallel to the rest of the code.

  I tried:

  1 mass recompile

  2. build the source distribution, remove existing build, create new

  3 allways include reminder all screws and all the screws called by reference via Server

  Always without success. I tried to hide the forum to find answers, but only found suggestion I already tried fail. Help, please

  So problem solved...

  Now it works.

  

  But I can't understand why and what was the problem.

• Start the asynchronous call brutal Typedef Bug

  There is a nasty bug which I think is the cause of many anomalies weird I see with the events of the user, like where some get fired and if I probe the refnum of the event on a VI that was launched using the asynchronous call node start I get some weird value for reference as 8450 or 5500 instead of some great typical integer. It is not also match the value that I get when I initialize the reference. This happens only intermittently, but I can reproduce the bug that I see on a smaller scale to a certain extent. This is not exactly the same as what I see in my current project, but I guarantee you both are related. Also, I'm pretty confident that this has to do with the help of LVlibs as well.

  So... to reproduce some questions:

  Unzip the attached code and open the project

  Open Main.vi. It is hard to see because it's pink, but notice the point of constraint on the node to call asynchronous start. This is provided at this point because I have a cluster of non-typedef in the connector pane, but a TD cluster plugged into it.

  Now open AsyncCall.vi

  Drag the eventcluster.ctl of the project on the façade of the asynccall.vi

  CTRL + x on the typedef cluster that has placed you on the front panel

  Select the non-typedef cluster by clicking it

  CTRL + v to replace the TD not cluster with the cluster of TD and save

  Return to main.vi, you will notice that the point of constraint does not go far.

  Open context-sensitive help and notice that the ctrl types match, but it's as if LV does not recognize it on the beginning of the node of the asynchronous call.

  Remove the node from asynchronous start call, then replace it. The cluster to the top wire. Voila, no point of constraint.

  Second question - same result but different method to get there.

  Now that you have components of connector typedef stress points and no more because you've taken the first steps of this 'exercise', remove the EventCluster.ctl from the library and record.

  WOAH, look the points of back strain, because node call asynchronous start still referencing the typedef cluster that he thinks that should be in the library. This can be seen by removing the cluster on main.vi and then right-click on the node to call asynchronous start on the side of the connector and creating a new constant of cluster

  It is creates a greyed out of control! Why? Well, we will reopen the context-sensitive help. Whadda you know, it's always looking for the control in Bug.lvlib that no longer exists.

  Now, the question that I'll have in my complete project that I can't post and can not reproduce on a smaller scale updates the typedef causes the dot of coercion. Otherwise I can't update my typedef cluster that contains all my events without going and replacing EVERY SINGLE launch async call node EVERY time I have add a new event.

  Major problem.

  Please let me know if these steps to reproduce were not clear or you have difficulties to reproduce the problem. I use LV2013 SP1. I opened the project in 2014 to see if it has been fixed in a later version, but I saw the same thing.

  I can repro with measurements of @GregFreeman and also confirm that I saw this same issue at least since the LV2012, but they have not reported it having not been able to provide a minimum test (thanks, @GregFreeman!) scenario

  For the record, it seems that the bug here, it is the spread of type sometimes makes an incorrect assumption / optimization as to if the conpane of the start the asynchronous call node must be updated when the source changes.

  A more obvious change - say, add/remove an entry, reverse order, or change data types altogether - always seems to spread properly.

  Incorrect optimization seems to be a terminal retains the same type of database, but transforms the type definitions - or, if the type definition is re-related or related outside a library owner.

  @GregFreeman watch the bug goes from non-typedef typedef, but it's actually worse in the other direction - when a link to a missing file is maintained.

  Call the asynchronous starting node seems to maintain a list of links that is distinct from that of the VI, and this list of links separated, this is what seems to not be properly invalidated. For example, in the screenshot, I illustrated example of Greg that the node generates no error in the compiler even after parenthood and rename the Typedef...

  

  ... even when we "Create Constant" on this terminal incriminated with list obsolete links, we get a compilation error. Since then, the grayed out type highlighted in the contextual help cannot be found, because 'Bug.lvlib:EventCluster.ctl' no longer exists, but the list of links separated from this node was not notified:

  

  It is worth noting that "Bug.lvlib:EventCluster.ctl" does not appear in the list of links of the VI at this stage.

  Often, no compiler error is generated after this failure occurs and as Greg reports, you could end up with undefined behavior (e.g. suspicious Refnums and events that seem to not fire not) (and I'll add it to this list a hearty portion of DAborts with diversion total number of messages).

  In addition, you * could * receive errors of cryptic linker for generations, but maybe not (the above screenshot, you'll notice I added two builds, neither of which seems to have a problem of building). (It seems that the broken link is travel with the distribution of the source, even if 'Disconnect the definitions of Type' is selected during the build process. That is why I believe anecdotally that node maintains a list of link separately the list of VI, and it's maybe part of the problem).

  It is noted that during this refactor (de-parent and rename) all screws and control remained open and in memory and all files have been saved. No funny business where LabVIEW would be unable to update links in a file that was not in memory.

  Another note - in the original example, all source files have been unifiles, and I can add anecdotal report this bug is much more insidious when separate compiled Code is active on the source files. In this case, the source may appear to be perfect - no point of constraint, no link expired - but the code that is currently running can be broken. In other words, what you see is not what you get, which makes debugging impossible. (This bug in particular is one of the few who makes "Cache of compiled clear objects" become a normal procedure controlled throughout the application development)

  Anyway, I wanted to draw attention to this issue, given that this thread is not yet associated with a CAR and it's a serious bug that generates a behavior undefined performance caused by a fairly normal refactor now has a well-characterized small repro case.

• path to vi the asynchronous call

  I'm trying to implement a splash screen that calls my main VI of asynchronously and displays messages during the charge of the VI.  Everything works fine in the development system, but it is not the case in EXE.  This is my first attempt to call a VI like that so I don't know that I'm missing something simple.

  See the image as an attachment.  The static reference points to a location on my server but I want to run the VI which is "Still included" in my EXE build, not the VI of the server.  The path of the VI comes back here is a combination of the path of the server and the location of generation, which is obviously not correct.

  What is really strange for me, it's that the main.vi is in fact running even if the path is incorrect.  The splash screen displays messages received from the hand, but when it is charged to the configuration settings, it fails because the vi path is c:\program files\tester\main.exe\z\labview\tester and it does not find my INI file.  How can I dynamically load this VI and even power give him my refnum of notification for my splash screen and return to the correct path of VI?  I tried to remove the path below property node and just add a constant path with main.vi as the value.  But it seems to get the path of the strict type reference (I understand is type only).

  

  I'd be willing to bet that your complete and complex application calls some VI who lives on the C drive, so to avoid any potential ambiguity, it uses the full path in the compiled (by chance) application, but on different drives. Your simple application probably calls subVIs that are only on the Z drive, so there is no possibility of confusion and it uses a shorter common path as a starting point.

• deployment of the asynchronous call

  I need deploy an executable on a computer of the client and for the first time, I need to use an asynchronous call in my program I don't know how I'm going to keep the path to the 'reference of VI Open' valid after I build and deploy the application.  The obvious way would be to use a configuration file to allow me to set the path independently of the LabVIEW Application.  However, when you include A VI in the always 'include' is not an EXE so not include a file in the folder of generation, which in fact had reference on the host computer.

  Teaching tips on how to proceed would be to very help full to learn to deploy this application

  Attached is a code snippet of how I am currently using an asynchronous call

  Thank you

  Mark R.

  That's how I always call a VI by reference.  Saw the ref static VI causes LabVIEW load this VI in memory and be able to find it by name when opened.

• Why did you remove the Bookmarks Sidebar button? It is the most important feature of firefox.

  Since the last update of firefox, the button to open the sidebar bookmarks have been deleted (ctrl + B) equivalent.

  I don't want to do a ctrl + B command in a GUI that I use so often. There is no pretty good extension for this task.
  This is THE reason why I used firefox since the beginning.

  I have gazillions of bookmarks neatly ordered for YEARS of browsing the web. This is how I use internet. If I have a project, I create a folder and I put all interesting links that I want to remember her. There is no way to do it in a drop down menu that close with each click.

  I know that those who use chrome and keep up to 60 tab open just to remind themselves what they need.

  I just spent half a day, looking for a good extension in chrome and opera.

  I feel so frustrated and helpless in front of browser development, I tell him. I'd be happy to pay $ 20 a year to keep that work there, one button send ctrl + B command, so simple and already coded.

  Firefox has been my only browser for years, I leave you with this. Now, I'm going to download and try the new internet explore.

  This button has been removed in Firefox 29, but there is a new button of the sidebar in Firefox 30. It is labeled boxes and sits in the control panel Menu-> customize.

  How to customize Firefox controls, buttons, and toolbars

• Why can't remove the table?

  I find a table under soctt Solaris 11g, named BIN$ dnz9wkbnQZaxdctGcob3RA == $ 0, as follows:
  SQL > select * from tab;
  
  TNOM TABTYPE CLUSTERID
  
  BIN$ dnz9wkbnQZaxdctGcob3RA == $0 TABLE
  BONUS BOARD
  DEPT TABLE
  EMP TABLE
  SALGRADE TABLE
  
  I do not know when the table created, if I want to delete the table, can I use following command:
  SQL > drop table BIN$ dnz9wkbnQZaxdctGcob3RA == $0;
  drop table BIN$ dnz9wkbnQZaxdctGcob3RA == $0
  *
  Line 1 error:
  ORA-00933: SQL not correctly completed command.
  
  Why I can't remove this table? How to do?
  Thank you

  Handle: EdwardKing
  Status level: Beginner
  Join date: 27 May 2002
  Messages total: 61
  Total Questions: 24 (24 remaining)
  so many questions without answers ANY .
  :-(

  http://forums.Oracle.com/forums/Ann.jspa?annID=718

  Why I can't remove this table? How to do?

  When a table is dropped, it goes in the TRASH; It may therefore be FLASHBACK.

  What you're trying to DELETE a table already in the TRASH; is NOT authorized.

  When all else fails, read the Fine

  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28310/tables011.htm#ADMIN11682

  Published by: sb92075 on February 11, 2011 17:47

• When I deleted a picture of my MacBook, why it also remove the external hard drive?

  So I tried to help my wife to free up space on his MacBook Pro by putting all of his photos on an external hard drive. After iPhoto slide the hard disk and wait 40 minutes so that he could transfer, I wanted to make sure it worked. I ejected the disk and then plugged in. Of course, all iphotos were still there. Just to be sure, I deleted one file in the folder on the computer's iphoto. I went to my shock and horror, the external hard drive, that it has been deleted it too! How is that possible? I've been scouring the Internet trying to retrieve this file with no luck. It was not in the trash. There is a tab "recently deleted". Time machine was not turned on. iCloud shows nothing. I can't download any software, because the computer is completely filled. How is it possible that by deleting this folder on the computer he did also leave the hard drive? AND it has not been saved in the trash? I have used PC, and whenever I need something in return, he was ALWAYS in the trash. And if I deleted something on the computer with an external hard drive connected, it would NEVER be removed from the external hard drive at the same time. I'm so frustrated and feeling SO bad that I deleted a folder with important pictures of our kids. Is that what I can do to recover the pictures? Any help is greatly appreciated.

  You used Time Machine at all? I see you say it was not on, but it never on and is at - it a backup Time Machine on the Macbook Pro?

• Why can't remove the button long BOOKMARKS since the end of the right hand of the bookmarks toolbar?

  This button is totally superfluous and takes place on my bookmarks toolbar. How can I remove it please?

  To be clear, I have the "normal" bookmarks button on my main toolbar that opens to the top of my favorites in the Panel on the left. What is the purpose of the button bookmarks on the right end of the bookmarks toolbar that opens the same bookmarks in a different presentation, and how can I get rid of him?

  There are two icons stars; We open the sidebar and the other opens a drop down menu, but the procedure to add or remove is the same. It's inflexible, you can try to keep it more firmly before by dragging in the window customize. Please note that sometimes this icon may jump to another location when you click Customize and can also do not show the text, it may not be immediately visible.

• Why Apple did remove the ability to change fonts and activate the mode night in ePub created in IBA?

  Re: "on the files ePub created with iBooks author - Apple Support"

  I want to IBA allows you to create ePub files that take advantage of all THE features of iBooks. However, in accordance with article above, this is not an option: "you will not be able to change the fonts or view files ePub created with these new models in night mode."

  I use the night mode all the time, and I often want to adjust the size or font style, so I have these options available in ePub files I create. I don't want to lose the ability to use features iBooks group of Notes and cards to study.

  I've tried the iBooks format, but these capabilities are also not there, since iBooks are made to be formatted in a particular way and has not changed a lot. That's why I'm set for the ePub format.

  Is there a way to create ePub IBA files that actually can take advantage of all THE features of iBooks?

  DLM

  Moon d wrote:

  Is there a way to create ePub IBA files that actually can take advantage of all THE features of iBooks?

  N ° inform about new features you want to see through the Apple

  http://www.Apple.com/feedback

  I think that some authors use InDesign to EPUB more elaborate.

• Why Apple music removes the already downloaded songs

  When I try to read an album I downloaded already it will pop the whole album to go to next songs on the playlist. Why does do that if I pay for the subscription?

  Data of Mobile (cellular) Try out for music from Apple in the framework > Mobile section and framework > music.

  Close the music application

  Go to settings > music

  Disable the library music icloud

  Go to settings > Itunes & app stores

  Disconnect from itunes

  Wait 3 minutes

  Log in to Itunes

  Return to settings > music

  Turn on icloud library

  Reopen the music app

• Why did you remove the option the APP for AppleTV Radio Music in this new update?

  I'm only not is not thrilled, in fact completely disappointed, the Radio part of the music app has been removed? What was the point of this?

  We don't know, since we are just users like you. Send feedback to Apple: Apple - Feedback. They do not individually respond to comments, but they read it.

  Good luck

  GB