Why can I not access some of the fonts I have installed on my Mac? This never happened before creative cloud.

Similar Questions

• Why can I not see some of the button in my client of VI?

  Dear all,

  IM new to ESXi. I using 3.5 and I continue on client VI with additional features such as scheduled tasks? However my version seems not to have these. Yes Im using the free version. Is is possible to load down a level if so someone could point me to it?

  Kind regards

  Some features, such as scheduled tasks are only available with vCenter.  If you are using a standalone ESXi Server, you will not have the scheduled tasks feature.

• Why can I not access / open my outlook e-mail account?

  Why can I not access / open my outlook e-mail account? Recently, I can't open my microsoft office outlook account.  Whenever I try to open it it comes up with the message: cannot start microsoft office outlook.  Cannot open the outlook window.

  I tried to fix it.  When it did not work, I removed & tried to re - install again.  It still does not work & I really need to get to my emails!  I am connected to a remote server, someone else is also related to the so they can access emails from same as me & they have no problems at the moment.

  Why can I not access / open my outlook e-mail account? Recently, I can't open my microsoft office outlook account.  Whenever I try to open it it comes up with the message: cannot start microsoft office outlook.  Cannot open the outlook window.

  I tried to fix it.  When it did not work, I removed & tried to re - install again.  It still does not work & I really need to get to my emails!  I am connected to a remote server, someone else is also related to the so they can access emails from same as me & they have no problems at the moment.

  Try if it works. It does for most people, but one of the posters said recently he did not for him or her.
  Start button > run > type /resetnavpane outlook.exe in the box > OK

  Note (space) between exe and / '.

  If you do not have the option RUN, use the start search box instead.

  Please post back the result.

  t-4-2
  t-4-2

• where my sweet im gone for messenger and why can I not access my winks when I'm chatting on messenger?

  Why can I not access my winks in messenger and where my sweetim has disappeared that I used to have here as well?

  Hello

  Messenger questions are asked and answered in different Forums as these.

  Here is the link to them:

  http://windowslivehelp.com/product.aspx?ProductID=2

  There is a list of Messenger Forums, including one for Instant Messages.

  See you soon.

• Hi, I need to install Adobe Flash Player, because the version I have installed on my Mac Os is old, but I can´t because I need to write my email and my password and I Don t remember my password, what can I do?

  Hi, I need to install Adobe Flash Player, because the version I have installed on my Mac Os is old, but I can´t do it because I need to write my email and my password and I Don t remember my password, what can I do? Thank you

  Email and the password will be the security of your computer, not something for all Adobe products.  You may need to consult the Mac clients if you are unable to determine the required information.

• Why can I not access my my music on my iPad.  I always get a message that says "not available".

  Why can I access my own music is no longer on my ipad.  Unless it's something I bought at the Apple Store I get a message that says "not available".

  On your music application, select my music down, in the middle of the screen there should be a dropdown menu with the Albums or artists or something. Click the menu drop down and make sure that only the downloaded music is not enabled (not green).

• Why can I not move objects to the bottom of the timeline in the video?

  

  Hello

  Why can't I move the new object I inserted (this is a PNG image) all down the timeline just above the video/audio? That's where I need?

  I edit the video with stripes, zooms and slices. I really hope that I can move it to the bottom of the timeline.

  Thank you

  This a cpvc of the project, right? Several chronologies are open when necessary, and it is indeed not possible (as in cptx projects) to change the stacking order. However, this could be a workaround: move the timeline you want to down horizontally until you have an empty space: you can then move it to the bottom. You'll go up the other deadlines in the location where you want to have this object at the bottom... Then, you will have to move again. Very heavy, I think it's much easier to think before you add objects and add them in the right order. CPVC-feature did not get much attention, after it was introduced, it is probably not that popular?

• Why can you not change currency on the model of cost in CB 1.5?

  Hello

  I wonder why not change you the currency on the model of existing costs?

  Thank you

  Hello

  Just to add to this answer, the chargeback does not change currency for the following reasons.

  1. as opposition to the payment does not have currency conversions, cost values must be converted correctly, which includes the configuration cost changes history as well.

  2 If a cost template is updated with a new currency, all costs associated with this cost model fixed (with history) are also must be updated.

  Because this operation could potentially lead to inconsistencies, chargeback does not allow it.

  If it is freshly created with incorrect currency cost model and therefore you do not want to change to the good motto, you could create a new model of cost with the appropriate currency.

  However, if you are using the cost model for some time in a single currency and now you want to change to another currency. Could you please let us know here your use cases?

  Kind regards

  Agnes

• Why can I not see details of the metadata in the panels to the right edge in the workspace "Essentials"?

  After using the bridge successfully for years, a weird problem occur. When I use my usual way, by using the workspace Essentials or a personalized version of this, I cannot see the metadata information (or sees only partially) nested inside each of the tabs - file properties to the Exif camera data to alter history.

  See the screenshots below. It seems that the formatting has been changed to align with the right side instead of the usual left edge which moves when the Panel is moved from the text. I've done the obvious things but did not a complete uninstall/reinstall, partly because I can't take the time or the risk other problems right now. I use CS6 now; the next step will be to CC.  Anyone has any suggestions for a fix of the reinstall? Thank you!

  That's what I have now:

  

  I can pull the right panel window much more to the left to reveal all the metadata, but I lose all real estate for the thumbnails. This is clearly a sign of something wrong:

  

  It's what I used to see, and what I expect to see:

  

  I don't know otherwise how can I phrase it, but I'll have one more try...

  You expand the Panel by dragging the border of the Panel, so you can see the two columns of text in the metadata Panel.

  Then, place the cursor on the small space between the two columns of text in the metadata Panel, NOT the border of the Panel. The cursor turns into a bar with arrows. If you drag it to the left, the left column should get closer and the wider right column.

  When the left column is the right size, take the edge of the Panel and reduce it to its original size. The right column of the metadata text must always be visible because the left column is smaller.

  I'm all out of words.

• Why can I not access "Tools"?

  It is suggested that I go to "tools/options/...etc" but I have no icon 'tools' at the top of my page. Can you help me to restore the correct layout?

  Hello, the bar menu is hidden by default in firefox - you can press the ALT key so that it appears...

• Why can I not play game spark gap of bubble for more than 5 minutes at a time before the cursor freezes and I can play is no longer?

  Have you tried to restart, clean disk, defrag.no help.

  Hi Lew50,

  Welcome to the Microsoft Answers Community Forum site!

  Please provide additional information to resolve your issue.

  1. What is the operating system that you are using?
  2. Was there any recent changes/updates / drivers installed on your computer?
  3. You have installed this game on your computer or you try to play online?

  If it's a game online, offers to optimize the internet Explorer by following the instructions mentioned in the article.

  http://support.Microsoft.com/kb/936213/

  Suggest you temporarily disable all security software and check if it helps you play game.

  There are chances that Bubble Popper is perhaps not compatible with the operating system you are using. Invite you to check if the game you are playing is compatible or not.

  To check the compatibility of Windows Vista, I suggest you visit the below mentioned link.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  To check compatibility in Windows 7, I suggest you visit the below mentioned link.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  If your game is compatible and you are always faced with the question, suggest you to visit the community Bubble Popper and look for the question.

  http://www.igarchive.com/Forum/?GID=9889&game=bubble+Popper

  I hope this helps solve your problem!

  Thank you best regards &,.

  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

• When I try to access Google I get a not found message "404" this never happened before

  Same thing with 'Bling '.

  Hi Jim,.

  ·         The question is limited to Bing and Google?

  ·         Do you use Internet Explorer to browse the internet?

  ·         Other sites work well?

  ·         It happens every time you access these Web sites?

  Check to see if this article helps you.

  Can't access some Web sites in Internet Explorer

• Why can I not access a computer2 from computer1, but not the other way around?

  I have a home network using the ethernet cable connected to an ATT Wireless and wired modem/router wired. Vista premium Computer1 and computer2 has Vista Home premium. Both printed and discovery / network file sharing on. The two appear on the network and sharing Center. I tried to turn off the two firewalls, configure permissions and shared file. Always the same. Computer1 can access computer files/programs. But computer2 is impossible. I get an error code: 0 x 800. I looked at the error online code, but the answers don't give me what I've done; share the installation program, permissions, firewall, reset the modem/router. In addition, the computer that has the problem?

  Hello

  1. What is the exact error message you received?

  2 have you made changes to your computer?

  I suggest you to follow the links and check out them.

  Method 01:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 02:

  Share files and folders on the network

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-files-and-folders-over-the-network-from-Windows-Vista-inside-out

  Method 03:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

• Why can I not add music to the next place more?

  This new update *. The feature that I found important on the old update has been removed, the possibility of creating a queue up next. I don't see why you could get rid of this ability. Explanations or something, I see no need to for?

  In addition, the design itself *, on both the app and the office. It was better before.

  You have to touch to add songs to your queue until the next Force the song you want to add to the queue and select play. The song will be added to your queue up next and will play just after the end of the currently playing song. What you can or can not find in the Force Touch menu is the option to play letter which replaced the option Add to the next place on previous versions. Everything you add to the next queue play literally will then play unless you rearrange once on the queue. Some have reported having the option of playing later in some cases, and then it disappears. Me, I've not seen once again. I hope this helps.

• Why can't I access object inside the ListItemComponent.onCreationCompleted C++... ?

  Hello world

  My application has a HTTP connection to retrieve the XML stream and insert data to the ListView using DataSource and DataModel, and I want to hear at each of its ListView ListItem is created and completely to use a ListItemData for my c++ object. So I write my code like this

  In main.cpp

  int main (int argc, char * argv)

  {

  App app (argc, argv);

  new MyApp (&app);)

  returnApplication::exec();

  }

  In MyApp.cpp

  MyApp::MyApp (bb::cascades:Application * app): //constructor

  {QObject (app)}

  QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);

  QML-> setContextProperty ("app", this);

  AbstractPane * stream = qml-> createRootObject)

  App-> setScene (NCA);

  }

  void MyApp::doMyFunction (const QString & someData) {}

  qDebug()< "yes!!="">

  }

  In main.qml
  {Page}

  {Of container

  {To ListView

  dataModel: myDataModel

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {Of container

  onCreationCompleted: {}

  Console.log ("-LISTITEM ONCREATION COMPLETED");

  app.doMyFunction (ListItemData.someData);    //<  but="" console="" print="" about="" "can't="" find="" variable="" "app"="">

  }

  }

  }

  ]

  } //end listview

  } //end container

  onCreationCompleted: {}

  myDataSource.load ();

  }

  attachedObjects:]

  {GroupDataModel}

  ID: myDataModel

  },

  DataSource {}

  ID: myDataSource

  Source: "some URLs to get RSS... blah blah."

  type: DataSource.Xml

  onDataLoaded: {}

  myDataModel.clear ();

  myDataModel.insertList (data);

  }

  ]

  }

  I try to run mycode. But a console is printed on "can't find variable: app". " How can I solve this problem?

  Thanks for any suggestions.
  MAZ

  Its because the listitem is not in the same document as the Page tree really, he lives with ListView and does not have direct access to the elements of the Page.

  What you can do is create a javascript function in the ListView, and then the listitemcomponent facing, which in turn can relay to your environment variable "app."

  int listitemcomponent add id: itemContainer your container can
  itemContainer.ListItem.view.someFunctionDefinedInTheListView (data)

  in the listview:

  function somefunctiondefinedinlistview (data) {}
  app.doMyFunction (data)
  }