Why can't replace OCR 11.1: PROT-1: failed to initialize ocrconfig

Similar Questions

• PROT-1: failed to initialize ocrconfig

  RHEL 5.2 + Oracle 11g
  
  Two servers with storage (gfs2)
  
  Example: [http://oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnRHEL5UsingVMwareESXAndNFS.php]
  
  [img] [http://img209.imageshack.us/img209/5514/screenshotexecuteconfignu0.png]
  
  1 script - ok
  2nd:
  
  Oracle root@RAC1# /u01/app/crs/product/11.1.0/crs/root.sh
  WARNING: directory ' / u01/app/crs/product/11.1.0' is not owned by root
  WARNING: directory ' / u01/app/src/product "does not belong to the root
  WARNING: directory ' / u01/app/src ' does not belong to the root
  WARNING: directory ' / u01/app "does not belong to the root
  Check to see if Oracle CRS stack is already configured
  
  Set the permissions on OCR backup directory
  Setting up directories network socket
  PROT-1: failed to initialize ocrconfig
  Failed to update the configuration of the Oracle Cluster registry
  oracle root@RAC1#.
  
  [img] [http://img511.imageshack.us/img511/1185/screenshotwarninglk7.png]
  
  [img] [http://img212.imageshack.us/img212/4551/screenshoterrormn4.png]
  
  Output generated by the configuration wizard "Oracle Notification Server Configuration Wizard":
  Command = /u01/app/crs/product/11.1.0/crs/install/onsconfig add_config rac1:6251 rac2:6251
  Failed to create the configuration of the NSO
  
  Configuration wizard 'Wizard in Configuration Oracle Notification Server' failed.
  The "/ u01/app/crs/product/11.1.0/crs/cfgtoollogs/configToolFailedCommands" script contains all of the commands that failed, was omitted or were cancelled. This file can be used to run these wizards of configuration outside of YES. Note that you may need to update this script with passwords (as applicable) before executing the same. -.
  
  PLS, help.

  Hello

  I think that the problem is in fact of GFS is not supported by Oracle 11 g on RH5.

  Take a look on Note: 279069.1

  Kind regards

  Rodrigo Mufalani
  http://mufalani.blogspot.com

• Why can't replace my drive hard hp compaq 6200SFF 250gig with the largest disk

  I think I posted this in the wrong section earlier.   I want to replace my drive hard HP Compaq 6200SFF with a larger 250gig. I've done it before with other computers with no problems. I bought a 500gig drive at a local store and makes a picture of Symantec Ghost (option was image-boot) to my 250gig drive.    Then I installed the drive and started again with my ghost drive.  Normally I just launch the function of disk image restore to restore the image of the old drive to the new drive.  When I tried to do with the 6200, very well restored ghost image but as soon as I start on the new drive, I get an error message saying that "windows does not stop normally.   I never get to see the Windows Startup logo and welcome screen or something else than this black screen with white letters.  Windows did end normally when I was last using the 250 GB drive and it will power off.  I can't get the restart to go further - I just get the same error screen - there is no options or choice - all said the message is to call your service representative.  Is there something special about 6200 readers?  Do you need to do something instead of or in addition to making a ghost image?  Is it something in the bios that should reset itself?

  Thank you, Hanspuppa.  I think you have a more recent version of Acronis, I ghost.  However, I was able to solve my problem using the Windows repair disk.  I ghost a disk image (ghost - ib) of my drive hard old man and then did a ' local disk image - of ' put the image on my new drive.  I received the repetitive message "Windows 7 does not normally" but then inserted the windows repair disk and booted from it.  He finds that the boot image on the new drive was bad and repaired.  He did not cela easily - reboot/turn off many times before the finished repair disk, I had and the pc booted from the new hard drive properly.  Now, I can do this with windows 7 and the emulation of hard drive has been to AHCI.  Knit a friend and I tried to do this on an another HP6200 with an image of Windows XP. We did not have a handy XP repair disk, but we went in the settings of the bios under storage on disk and passed the SATA AHCI to IDE emulation.  When we restarted Windows message here once, we supported on enter and him went pc to boot normally.  So the problem revolved around the difference in the AHCI IDE and the boot image created by Ghost.

• I have 10 windows and that you can not install LR6.  I get "Installer failed to initialize" appears each time. It worked fine on Windows 7.

  

  That's what I get. And the Adviser of support is no longer available.

  Please see the links below.

  • Error: "cannot install initialize | Windows
  • The Adobe CC Installer failed to initialize [windows OS]
  • https://forums.Adobe.com/thread/1848277
  • Creative cloud Installer fails to boot into OSX Mavericks

  Hope this will help you.

  Kind regards

  Hervé Khare

• Why can we not replace the WLAN on Satellite L670 card?

  Hello

  I use a PSK3EE satellite L670-143, which comes with a default of Atheros AR9285 wireless network adapter.
  I tried to replace it with the 5 GHz Intel Centrino Advanced-N 6230, who has a 2-pin connection too.
  Unfortunately, the card is correctly recognized by Windows7 but for some reason any, he gets no signal.

  Running inSSIDer, there is no unique surrounding device found, while even my own router is advertising in the 5 GHz band, and the taskbar icon, said Intel's Wifi network but it still says that Wifi is disabled.

  Trying to enable/disable wireless network connection by using the special key FN + F8 combination, I am unable to turn it on.

  Please someone has installed a third-party network adapter in a satellite? Toshiba blocks everything, but default wireless adapters? or how to operate next door only be correctly detected by Windows, but cannot turn the signal?

  Thanks for any help.

  > Why we cannot replace the NIC on Satellite L670?
  In General, hardware upgrade on laptops is very limited because of platforms of specific material used for mobile computing.

  Associated s user updates are only RAM and HARD drive. If you have any other questions on this I recommend you to contact the nearest Toshiba service provider. They have access to the database of Toshiba and can offer any kind of information about the hardware and the hardware upgrade.

• Why can't I have a free windows 10 to replace MyWindowsApp vista

  Why can't I have a free windows 10 to replace my windows vista. / / /

  The main reason, I think, is that there is too much PC running Vista which are not compatible with Windows 10.

• Why can't get my music on Apple music?

  I believe that this question was asked here several times but I do not see that it has been answered.

  I have music from Apple, and I have a lot of songs on my 6 iPhone through Apple music.  However, it is a fair bit of stuff that I have on my MacBook, which is not on the Apple's music.  Why can't I just put these albums on my iPhone via iTunes as I used to?

  All I get when I try to sync is "iCloud Music Library Is On" but if I try turn off voltage, it tells me I'm losing every album that I saved my music Apple, which is hundreds and hundreds... and something I don't want to do.

  Can someone help me please?

  You cannot synchronize manually if you use Apple music disco iCloud.

  Apple music works such that if the songs in your library iTunes on your computer is not found in the iTunes Store music library, it will download the unmatched songs so you can still access it if the music to iCloud service.

  To do this, iTunes must analyze your library on your computer and download these songs.

  Add music to your collection to your music library Apple - Apple Support

  If you turn off iCloud music library, then everything that is in iTunes on your computer will replace the content of the music on your iPhone app. This is why he warns you.

  Your iPhone and your library of music from iTunes on your computer must contain the same elements. The iPhone can also contain a subset of the items in your iTunes library, but essentially, it's all on the music from your iPhone app must already exist on your computer in order to avoid the deletion of things on the iPhone.

• HP 6600: why can I not print with only black when I have only black cartridge in hp 6600 as hp 4500'?

  and he always says that color cartridges are leaking so I had to make one more only accepts black and I can not print with only black.

  How can I print with only black when I have the only black in the printer.

  Why only black does not work with the color cartridges.

  What is the error message you see with the color cartridges installed?

  HP and other printer manufacturers have technology another printer for different needs.  For ink jet printers:

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. 5665 envy is an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet Pro 8610.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the print head because of clogs, air ingested in the printhead or grilled printhead resistances of shooting. The Officejet 6600 is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.

  If you do ever print color laser printer would probably be a better choice.  If you occasionally print color but especially black a HPI printer as those in the first category above can be a good choice.

• Why can't I open a downloaded file "OFC"?

  Why can't I open a downloaded file "OFC"?

  You need a program to open it with.

  http://FILExt.com/file-extension/OFC

  The OFC file type is primarily associated with "Open Financial Connectivity File. Connectivity OFC (Open Financial) is a file format obsolete for the information on financial transactions. It has since been replaced by OFX.

  http://support.Microsoft.com/kb/890400

  The import of the .ofc file fails when you try to download and then import a statement OFC Open Financial Connectivity () from your financial institution in Money 2005

  http://www.FileInfo.com/extension/OFC

  Financial data format, developed by Microsoft as an open format for exchanging data with other financial programs; replaced by the . OFX format in 1997, and is not supported by MS Money 2005 or later.

  See you soon. Mick Murphy - Microsoft partner

• Why can I not use my product key after re-boot my operating system?

  I had to do a system restore for my operating system due to virus. I had a previous version of Microsoft 2007 on the computer, but when I did the re-boot it wasn't there. I have the product key for the original program. Why can't I use it when I downloaded the program again on the site?

  Microsoft Office 2007 Download Center:
  http://www.Microsoft.com/Office/downloads/

  Requires that you have a valid Office 2007 product key.

  How to order an Office 2010 and 2007 disk backup:
  (for 2007 see the link located at the bottom of the page)
  http://www.Microsoft.com/office/backup/en-us/default.mspx

  How to replace Microsoft software or hardware,.
  order service packs and replace manuals:
  http://support.Microsoft.com/kb/326246

  = The phone activation may be required.

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

  Activate the 2007 Microsoft Office programs
  http://Office.Microsoft.com/en-us/SharePoint-Designer-help/activate-Microsoft-Office-programs-HA001233434.aspx
  (See telephone activation)

  Older version of Office: Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851

  = Other options =.

  Trial versions
  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

  Type errors product key invalid that occur in Microsoft Office 2007 or 2003
  http://support.Microsoft.com/kb/2549291

  Phone activation: http://office.microsoft.com/en-us/sharepoint-workspace-help/activate-microsoft-office-programs-HA010354227.aspx
  Activate by using the telephone
  You can telephone an Activation Center and activate your product with the help of a customer service representative.

  Important
  Phone numbers of activation do not appear in this article, because there are a lot of numbers, and the correct number for you depends on several factors. Microsoft software can be obtained under various licenses, including individual retail licenses, original (OEM) licenses, and volume licenses OEM. Phone numbers vary by product license and country/region. In step 2 of the Activation Wizard, use the phone number provided to contact the Microsoft Activation Center.

  Telephone activation may take longer than activation through the Internet. You should be at your computer when you call, and you should have your software product key.

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs
  http://support.Microsoft.com/kb/927921

  J W Stuart: http://www.pagestart.com

• ODI can be replaced with FDMEE?

  Hello

  I was just wondering, ODI can be replaced with FDMEE?

  These are the questions I want clarification on:

  can 1 - use ODI to achieve the upload of a file basis as done by FDMQ? I think it's possible.

  2 can we achieve break through the ability of the ERPI with our custom application and ODI? I think it will be much difficult.

  3 is it wise to replace FDMEE by ODI and customization?

  4. any idea of license? is expensive ODI or FDMEE?

  
  Appreciate your help guys.
  Concerning

  Hello

  I'll answer your questions, but you need to understand is that FDMEE is built at the top of the ODI and relies on it to make its charges of data etc. It offers is a user-friendly interface and a lot of value-added features like that out of the box auditing, reporting, Pierce back capabilities and an extremely powerful and accessible mapping engine. If your target applications are part of the entire Oracle Hyperion product, then FDMEE would be the wise choice for loading the data. ODI is a business integration tool that can move data between heterogeneous technologies. It provides templates of code in the form of its knowledge Modules that support different, but integration strategies in general, we must still build all streams integration of a set of components, nothing came out of the box. Compared to FDMEE it requires more technical knowledge and is not very accessible to your users of the average company in its pure form.

  (1) Yes you do.

  (2) Yes, in theory, but it would be a customization that requires a bit of work. Why would you re - invent the wheel when you have one output of the solution of vbox offering these features and much more?

  (3) it depends entirely on your needs, but for target of Hyperion applications, for most integration strategies I would say certainly not.

  (4) the licensing models are different. I'm no expert on licensing, but I think that FDMEE is user based licenses while ODI is licensed per processor on staging database technology. Better check with your friendly Oracle for details sales representative.

• Why can't I activate photoshop cs

  Why can't I activate photoshop cs

  Photoshop cs to 2003?

  If so, adobe disabled the activation servers, you need to download a replacement activation free photoshop cs2 to use instead of your old photoshop cs.

  Use the serial number on the download page.

  https://forums.Adobe.com/thread/1195856

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Why can't I drop the ASM disks and stop ASMLib?

  Hi, I wanted to remove the disc, but this operation has failed:
  
  1.
  
  /etc/init.d/oracleasm deletedisk DATA1
  Remove ASM disk "DATA1" [NOT]
  
  I know there is the solution to replace header ASM on a disc information
  DD if = / dev/zero of = < your_raw_device > bs = 1024 count = 100
  
  and then droping is successful
  
  but I've also seen resources who said that it should be count = 50
  
  If someone could confirm count = 100 or 50?
  
  2.
  
  In addition to this I tried to stop ASMLib and she doesn't have too:
  
  stop /etc/init.d/oracleasm
  Drop Oracle ASMLib discs: [OK]
  Close the driver Oracle ASMLib: [FAILURE]
  
  OK, so using dd will help me to get rid of the disks, but I'm worried about ASMLib in general, why can't you stop it? All instances of the ASM have been removed before. There is no software installed ASM, in addition to ASMLib.

  There are several things not clear

  1 as most of the people here you forgot to display four-digit version number, assuming that Oracle never changes, or we can guess that you are running.
  The two statements are false. To stop asmlib, you use exit oracleasm

  2 you use the root account or another account? You must use the root account

  3. Why do you not use the oracleasm command?

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• where can I replace my macbook lithium?

  Where and how can I replace my 15 "macbook pro late 2013 lithium?

  In an Apple store.