Why cannot create the table partitioned successfully?

Similar Questions

• SanDisk extreme pro 128 GB cannot create the NTFS partition

  Hello
  I have a sandisk extreme pro 128 GB usb and I try to format it to NTFS in windows and it is impossible.
  The only way I success for formatting on my MAC but the NTFS partition is not visible in Windows...
  Use NTFS or HFS partition without problems, but on Windows the button does not work on my MAC and can...
  Does anyone have a solution for me?

  PS: I try windows XP, 7 or 8.1 nothing works...
  Windows see 2 partitions on my key, but cannot format.

  I just fix myself... about here was a good idea LoL

  So my problem was when I format the key the first time I use my MAC, and by default the MAC use GUID partition to format the key and on Windows, we should use MBR partition.

  Then when I format the USB on my MAC using disk utility, on the score of "variants" tab change when to create an NTFS partition MBR (instead of default GUID) partition

  After this, format the key and that's it!

  Its working fine now, I'm happy with this beautiful, design USB by Sandisk ;-)

• Cannot create the 2nd partition

  OS x 10.8.5

  attempted to create a 2nd partition for El Capitan

  Started in recovery partition

  open disk utility

  Click on the (+) sign to create a new partition

  partitioning began

  says the disk that shrink

  crashed - had to force reboot

  Started in single-user mode

  Run fsck - fy

  disc repaired

  I tried partitioning again

  After a long time, a message says that it na not create partition

  of course now I have even more afraid of putting at level m...

  is there something wrong with my HARD drive? If she wrote on the site of data?

  (OS X 10.8 was a clean install after a failed upgrade)

  in any case, is it possible to divide this drive? (clean install of El Cap would be nice but is not worth it because it might be too slow for me - early 2009 iMac)

  How much free disk space do you have?

• Cannot add the table to partition to partition

  Hi guys,.

  my version of oracle is 11 GR 2

  I created the table with the following DDL

  CREATE TABLE PERSON

  (

  ID_PERSON VARCHAR2 (10 BYTE) NOT NULL,

  NAME_PREFIX VARCHAR2 (5 BYTE),

  NAME_LAST VARCHAR2 (40 BYTE) NOT NULL,

  NAME_FIRST VARCHAR2 (30 BYTE) NOT NULL,

  NAME_MID VARCHAR2 (30 BYTE),

  NAME_SUFF VARCHAR2 (5 BYTE),

  CD_GENDER VARCHAR2 (1 BYTE),

  DATE OF DATE_BIRTH,

  FL_AGE18 VARCHAR2 (1 BYTE),

  ID_SSN VARCHAR2 (BYTE 9),

  ID_DMV VARCHAR2 (20 BYTE),

  ID_PH_NBR VARCHAR2 (10 BYTE),

  ID_ALIEN VARCHAR2 (10 BYTE),

  ID_TRIBAL VARCHAR2 (10 BYTE),

  NAME_TRIBAL VARCHAR2 (40 BYTE),

  ID_CITY VARCHAR2 (5 BYTE) NOT NULL,

  ID_AD_RESIDENCE NUMBER (38),

  ID_AD_MAIL NUMBER (38),

  CD_NVRA VARCHAR2 (5 BYTE),

  DATE OF DATE_ACCEPT,

  DATE OF DATE_EFFECT,

  CD_STATUS VARCHAR2 (2 BYTE),

  CD_STAT_REASON VARCHAR2 (50 BYTE),

  DATE OF DATE_STAT_CHANGED,

  DATE OF DATE_LAST_ACTIVE,

  FL_RESI_PF VARCHAR2 (1 BYTE),

  CD_RESI_PF VARCHAR2 (4 BYTE),

  CD_RESI_OTH_PF VARCHAR2 (40 BYTE),

  FL_ID_PROVIDED VARCHAR2 (1 BYTE),

  FL_ID_NEVER_ISSUED VARCHAR2 (1 BYTE),

  CD_ID_VALIDATION VARCHAR2 (2 BYTE),

  DATE OF DATE_ID_VALIDATION,

  FL_SIGNATURE VARCHAR2 (1 BYTE),

  FL_US_CITIZEN VARCHAR2 (2 BYTE),

  CD_CITIZEN_PF VARCHAR2 (5 BYTE),

  FL_ACP_PERSON VARCHAR2 (1 BYTE),

  ID_ACP VARCHAR2 (BYTE 9),

  DATE OF DATE_ACP_START,

  DATE OF DATE_ACP_END,

  FL_POLL_WORKER VARCHAR2 (1 BYTE),

  FL_CHALLENGE VARCHAR2 (1 BYTE),

  FL_PREHAVA_PERSON VARCHAR2 (1 BYTE),

  DATE OF DATE_DEATH,

  FL_ELIGIBLE_DELETE VARCHAR2 (1 BYTE),

  FL_ELIGIBLE_PURGE VARCHAR2 (1 BYTE),

  FL_DISABLED VARCHAR2 (1 BYTE),

  FL_ELDERLY VARCHAR2 (1 BYTE),

  NAME_SEARCH VARCHAR2 (40 BYTE),

  AD_SORT_NUM VARCHAR2 (20 BYTE),

  ID_VALID_OTHER VARCHAR2 (50 BYTE),

  ID_UVI VARCHAR2 (16 BYTE),

  ID_CITYSHIP VARCHAR2 (5 BYTE),

  FL_PROTECTIVE_ORDE VARCHAR2 (1 BYTE),

  FL_INACTIVE VARCHAR2 (1 BYTE),

  FL_OVERRIDDEN VARCHAR2 (1 BYTE),

  FL_ALT_REG_SIGN VARCHAR2 (1 BYTE),

  FL_PERMANENT_ABSEN VARCHAR2 (1 BYTE),

  CD_SPEC_STATUS VARCHAR2 (1 BYTE),

  FL_UOCAVA_COMMUNICATION VARCHAR2 (1 BYTE),

  AD_UOCAVA_EMAIL VARCHAR2 (254 BYTE),

  CD_PARTY VARCHAR2 (5 BYTE),

  DATE OF DATE_PARTY_ENROLL,

  DATE OF DATE_ACCEPT_ORIGINAL,

  DATE OF DATE_MOVED,

  DATE_CHANGED DATE,

  AD_EMAIL VARCHAR2 (254 BYTE),

  CD_RACE VARCHAR2 (5 BYTE),

  FL_CITIZEN_HEARING VARCHAR2 (1 BYTE),

  ID_USER VARCHAR2 (20 BYTE),

  TM_STAMP TIMESTAMP (6).

  DATE OF DATE_LAST_CONTACT,

  NAME_PREV_LAST VARCHAR2 (40 BYTE),

  NAME_PREV_SEARCH VARCHAR2 (40 BYTE),

  DATE OF DATE_REG

  )

  TABLESPACE PERSON_DATA

  PCTUSED 0

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  LOGGING

  PARTITION BY RANGE (ID_CITY)

  (

  P_PERSON_1 PARTITION VALUES LESS THAN ('1')

  LOGGING

  NOCOMPRESS

  TABLESPACE PERSON_DATA

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  DEFAULT USER_TABLES

  ),

  P_PERSON_2 PARTITION VALUES LESS THAN ('2')

  LOGGING

  NOCOMPRESS

  TABLESPACE PERSON_DATA

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  DEFAULT USER_TABLES

  ),

  P_PERSON_3 PARTITION VALUES LESS THAN ('3')

  LOGGING

  NOCOMPRESS

  TABLESPACE PERSON_DATA

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  DEFAULT USER_TABLES

  ),

  P_PERSON_4 PARTITION VALUES LESS THAN ('4')

  LOGGING

  NOCOMPRESS

  TABLESPACE PERSON_DATA

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  DEFAULT USER_TABLES

  ),

  P_PERSON_5 PARTITION VALUES LESS THAN ('5')

  LOGGING

  NOCOMPRESS

  TABLESPACE PERSON_DATA

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  DEFAULT USER_TABLES

  ),

  P_PERSON_6 PARTITION VALUES LESS THAN ('6')

  LOGGING

  NOCOMPRESS

  TABLESPACE PERSON_DATA

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  DEFAULT USER_TABLES

  ),

  P_PERSON_7 PARTITION VALUES LESS THAN ('7')

  LOGGING

  NOCOMPRESS

  TABLESPACE PERSON_DATA

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  DEFAULT USER_TABLES

  ),

  P_PERSON_8 PARTITION VALUES LESS THAN ('8')

  LOGGING

  NOCOMPRESS

  TABLESPACE PERSON_DATA

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  DEFAULT USER_TABLES

  ),

  P_PERSON_9 PARTITION VALUES LESS THAN ('9')

  LOGGING

  NOCOMPRESS

  TABLESPACE PERSON_DATA

  PCTFREE 10

  INITRANS 1

  MAXTRANS 255

  STORAGE)

  64K INITIALS

  ACCORDING TO 1 M

  MINEXTENTS 1

  MAXEXTENTS UNLIMITED

  DEFAULT USER_TABLES

  )

  )

  NOCOMPRESS

  NOCACHE

  NOPARALLEL

  MONITORING

  ALLOW THE MOVEMENT OF THE LINE;

  I tried to add the partition with the highest value 10

  change the voter table add partition P_PERSON_10 lower (10);

  change the voter table add partition P_PERSON_10 lower (10)

  Error on line 11

  ORA-14074: partition bound must gather greater than that of the last partition

  I want to add 100 to leave with max 100 value, please help me in this regard.

  Split partition also get the error

  Thanks in advance

  Kind regards

  REDA

  ID_CITY a VARCHAR2 is not a number.  Thus, although "less than ('10')" is correct for a VARCHAR2 ("equal or superior (10)"), where do you think the value '2' would go? '2' less than '10' is? Where would the '21' value?  Where would '56'?  Tip: '21' is less than '3' and 56 'is less than 6'.

  Also your first partition is defined as "less than ('1')", which makes no sense.

  Hemant K Collette

• Setup cannot create a new partition system or locate an existing system partition error on installing windows 7

  I am trying to install windows 7 on my emachines T6520 in with a single hard drive. so far, I can get to where it says select the partition. so I select the single partition it and it gives me this error "cannot create a new partition system or locate an install" ive tried EVERYTHING. I have only plugged in the USB is a MI to help install windows from. This time the boot priority is hard disk and then cd rom. ive google search for days and nothing helps. I have the windows installation disc, but whenever I boot from the disc it loads the configuration files and then right until he finishes it says "unexpected error" and I can reboot or turn off the computer, that's why im starting on a USB key. Ive also tried DBAN and no luck. Help, please!

  Hello

  I suggest you view and perform the steps from the following link to install Windows 7.

  Installation and reinstallation of Windows 7

  Always if you have any problems in installing Windows 7 perform the steps from the following link.

  Solving Windows installation problems

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win 7 Pro, FX6100, 8 GB of ram, 250 GB ssd; cannot find the system partition

  Basics are there.  It blocks from the tent to set up partitions.  I am giving all of the 250 GB SSD to use as seems it and it is just lost.  It does work with no partitions, partition of the entire disk.  He didn't tell me what he wants.  And error messages make no sense.

  They are like: (and my response)

  cannot find the system partition (do a stupid)
  Can not find the installation partition (crikey, I gave you the entire disk, make one)

  Talk about mega-frustration.  How about a useful error message and some useful ways to respond.

  >:-((

  If the ssd is not recognized in the first part of the installation process, as a location to install win on, you need to check the manual of the card mother about all the necessary bios for its port settings, or weather, you need to install any third-party disk controller.

  And if it's a new ssd, must not contain any partition table, unless you have prepared this ssd when you started in one of your other installations win, that can be part of your problem.

• creating the table

  Hello experts;

  I know that I cannot create a table like this but y at - it a solution for it

  create table like tp

  with t as)

  Select 1 as id, to_date (' 04 / 01/2015 ', ' DD/MM/YYYY') as d_from, to_date (' 07 / 01/2015 ', ' DD/MM/YYYY') as the double d_to

  )

  SELECT id, level + d_from - 1

  t

  connect by level < = d_to - d_from + 1;

  Alias is missing...

  Try this: (this one works)

  CREATE TABLE tp
  AS
     WITH t
          AS (SELECT 1 AS id,
                     TO_DATE ('1/4/2015', 'MM/DD/YYYY') AS d_from,
                     TO_DATE ('1/7/2015', 'MM/DD/YYYY') AS d_to
                FROM DUAL)
         SELECT id, LEVEL + d_from - 1 dt
           FROM t
     CONNECT BY LEVEL <= d_to - d_from + 1;
  

  See you soon,.

  Manik.

• DBCA cannot create the database in 12 c in Windows

  Hello

  After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question

  It throws an error message of "Recovery Manager could not restore the data files"

  I looked at the log files, here is some information:

  Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4

  Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data

  Not sure if this helps, but I am attaching several log files to help debug the problem.

  I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.

  Any help is appreciated.

  Thank you

  Pranav

  Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• drop and re-create the table using dynamic sql

  The following procedure should drop the table and re-create it. Currently, I get the dbms_output of the query. If I run the query only, it works well. but through the procedure, it does not work. Please help me
  
  

  PROCEdure emp_backup is
  sql_txt varchar2(10000);
  begin
       begin
       EXECUTE IMMEDIATE 'drop table emp_backup ' ;
       exception
       when others then
       null;
  
       sql_txt:= 'CREATE TABLE emp_backup as ' ||
                   'select * from emp  '||
                   'where dep_no=10 ' ;
       dbms_output.put_line(sql_txt);
       EXECUTE IMMEDIATE sql_txt;
  Exception
  when others then
  Null;
  
  End;

  Daniel wrote:
  I'm getting following error ORA-01031: insufficient privileges

  What is the command to grant privileges to this

  GRANT CREATE TABLE TO <>
  

  Detaching Frank, however, and echoing my previous comment, let them down and to re-create the tables makes no sense. It is logical to truncate a table if you test a load. If you build a data warehouse, it makes sense to delete and re-create a partition if you rerun a load for a particular date and that you have daily partitions. Deletion and recreation of a table in a stored procedure is not a reasonable way to test a system (nor is there a reasonable way to approach change control issues that will inevitably produce when you need to change the structure of a table).

  Justin

• ESXi 4.0 Dell T105 "cannot find the boot partition.

  Dban Nuke used to wipe my hard drives (two of them).

  Unplugged the secondary hard drive.

  Installed ESXi 4.0 (declared success).

  Machine starts, starts in ESXi 4.0, starts to load, then:

  "Cannot find the boot partition.

  Others have suggested to set parameter SATA AHCI controller. Not possible in my BIOS. I 'ATA Mode' and 'Off '. "Off" turns off the entire controller and my hard drive is not recognized.

  Others still suggested to install on a USB key. Wary of such a hack...

  Help, please. There is very little out there on ESXi 4. Even a pointer to VMware documentation with a list of error messages and their meaning/solutions would be helpful (unable to find such a list myself).

  I had the same problem that others are with the start-up for the drives. I went with the USB boot and it works very well because it has an internal USB port, it works even better because I'm not burn an external port. I use an older version of BIOS that does not start USB ports have enough fast for the key USB is recognized from a cold start *bummer* but not a big deal. Once this is done, I'm off the coast and run very well.

  I would recommend going this way until someone comes up with a better alternative, which I would be interested in doing.

• create the table as

  I have a table repair with 500 repairs (range) on 10.2.0.4 db
  
  I created a table in db 11 g 2 using db link
  
  create the table temp_order_hist in select * from order_hist@10db;
  
  When I do its partations not create
  
  is there way I can do create table and get the partations
  
  Thank you

  is there way I can do create table and get the partations

  Yes,

  CREATE TABLE my_objects
  PARTITION BY RANGE (created)
    (PARTITION part_old
       VALUES LESS THAN (TO_DATE ( '201001', 'yyyymm')),
     PARTITION part_other
       VALUES LESS THAN (maxvalue)
    ) AS
    SELECT *
    FROM   user_objects;
  

  Concerning
  Peter