Why color does not change when I copy one file to another?

Similar Questions

• Foreground color does not change when I use the color picker.  CS6.

  Foreground color does not change when I use the color picker.  CS6.

  Your document is in grayscale, convert color (Image > Mode).

• Why the gradient does not change when I copy and paste from one document to another?

  Here is a screenshot of the objects I want to copy to a new document.

  

  As you can see in the following picture, the gradient changes considerably between the two documents.

  

  All parameters in the gradient panel are the same, so I have to assume there is a document setting that differs between the two.

  Also, I tried to change the mode in the CMYK to RGB color Panel, and it was locked to CMYK.

  Any help would be appreciated!

  Thank you

  Robbie

  Sounds like the two documents is defined on (a RGB and a CMYK) color modes. The title bar should indicate the color mode you are using.

• Why voltage does not change when I put a resistor in parallel?

  Hi all

  I have observed something that seems quite strange and I do not understand. I'm under Multisim 10.1.1.

  I have a sinusoidal voltage source that is diode full-wave rectified by a RC parallel network for the purpose of obtaining 120VDC, who has everything works beautifully. I am in a position the voltage with a voltmeter. Crazy is when I put a resistor in parallel with this output 120VDC, voltage drastically changes. For example, when I put a resistance of 1kohm in parallel with the release of 120VDC, the voltmeter reading falls drastically to 0.835V.

  Of course if I perform this test with a simple DC 120V source, the voltmeter reading remains stable at 120VDC.

  Does anyone have AN idea why this is happening? I am full of ideas. Thanks a lot for all the help in advance!

  Sorry for the frequent posts, I was not thinking clearly yesterday night when I posted this question. Voltage divider simple problem. Sorry again!

• Why height does not change when I export?

  Hello. I'm creating a navigation bar. When I save for the web, my files are all the same width and height. BUT, I added a like a shadow behind each icon Gaussian blur for the on the page navigation bar. And now, when I save it for the web, it increases the height. It is the good 105px to 141px. There is no stray points, no rules. Only happens when I have add the drop shadow of a Gaussian blur. Cannot understand it. Can anyone help?

  Using CS2.

  Thank you!

  The Gaussian Blur is probably more than the work of art.

  See if you have linked preview selected in preferences under general if yes try that power off.

• Why Muse does not change the names of certain images or property when exporting to HTML format?

  Why Muse does not change the names of certain images or property when exporting to HTML format? and how can I keep the integrity of the name that the image/file has been saved as?

  General Muse renames a file imported image if the image is modified to achieve the design or the exit, or if the name change was necessary due to a name conflict (two different images which had the same file name when importing).

  The design-time features that will modify an image include cropping, rotation, rounded corners and effects (drop shadow, bevel or glow). It is also true that, in rare cases, Muse will merge an image with other content to optimize page download performance. An example of this would be to place a background image on a block of text that contains the text using system fonts. In this case, rather than a single image for text output and a separate image for the background, Muse will combine the two into a single image.

  If an image is placed or imported by Muse and not tampered with, the image is crossed without modification (including the file name) at export/publish (with him except that Muse will always rename if two different images with the same name).

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• Why iPhoto does not appear when I opened 13 items on iMac?

  Why iPhoto does not appear when I opened 13 items on iMac?

  Moving to the right forum

• Hello! The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do? Also says I h

  Hello!

  The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?

  Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID

  Hello

  Greetings!

  Is Typekit on?

  Visit this link: Add to your desktop of Typekit fonts

  Concerning

  Jitendra

• When I visit a link color does not change, and if this is the case, it is up to the color of unvistied in one day.

  When I visit a site rarely the color of the link changes to the color I chose. even if it does not change, it is color not visited in a day or two.

  Hello.

  What is happening (very probably) because Firefox is not store your history navigation for long, or at all. Go to tools > Options > privacy and if ensure that configurations are defined as you want to be. If they are, it is likely that you have some security software that is to clear the history of your Firefox (and possible other browsers have installed). The likely suspects are the antivirus, firewalls, and the suites of security, but utilities such as CCleaner cleaning are also able to clean up Firefox browsing history and other personal data. Make sure that you have configured them to do this.

  I must remind you, however, that some sites (they are rare, although) don't have not their links change color when it is visited. This happens only when their authors report deliberately does not change colors. You can force Web sites to use a color scheme of your choice by going to tools > Options > content > colors... and uncheck 'allow pages to choose their own colors ". You can also configure the color scheme on this screen.

  I hope this helps.

• Why the length of film does not change when I remove Vista Movie Maker clips?

  You have not answered my other question.  I get an error "does not fit" when you publish a movie on dvd. I deleted half the clips in the storyboard and length does not change. I always get the error "will not fit". After I saved the project. It seems that it becomes the length of the imported clips not what is in the table of Storyboard. The length of the table of Storyboard is only 01:30, but the length in the window shows 02:42 that is causing the error. It seems to me that it should use the length of the table of Storyboard because it's what makes the final video on dvd.

  Yes... adding or removing items from the timeline should change the duration of the project.
  The files in your component collections have no effect on the duration of the project.

  I suggested that you publish in the movie .wmv format to see if the version with clips
  removed would still last for 02:42.

  As I have said from the beginning... creating several small projects may be your solution.

  I'm sorry that my suggestions seem redundant to you. Perhaps you could find assistance elsewhare.
  There is a forum dedicated to Movie Maker on the following link:

  Windows Movie Maker Forums
  http://www.windowsmoviemakers.NET/forums/

• Link color does not change after you click in Firefox for Android.

  Why the link I click does not change its color in Firefox for Android from blue to purple?

  Depends on the specificity of the site you click on links on.

• Old image does not change when replaced

  I have a form with an image that uses a relative file location URL.  When I open the resulting PDF form, the image appears without any problem.  Then I go out to the location of the file and replace the image with a new one.  The new picture has the exact name as the old image.  When I open the form the old image will appear in the form.  This happens even when I remove the old image of the server.

  I have not incorporated the image in the form I want to be able to change the image without having to re - open the form in the designer and reregister the outside.

  Can you please explain why the picture does not change even if I replaced with one that has the correct name and path as the original relative.

  See you soon,.

  Barry Graham

  Hello

  Have you set the relative relationship in the LC Designer?

  Once the form is rendered, it uses the link to display the image file in the ImageField object. Once the form is rendered the image data is stored in the PDF form and becomes part of the file.

  So there no need to return the server to get the data again.

  In addition, the image Embed in Designer checkbox can be confusing (he made me at least until John Brinkman put me straight). When you select embed, it means that the image data be available for other developers who open the form in the designer of the LC. When it is unchecked, the image data is already contained in the PDF file, when the user opens the form in Acrobat/Reader.

  See an example here: http://assure.ly/mcFrC6.

  Hope Steph,

  Niall

• Cursor does not change when you move the link to context menu

  I created a text for a context menu link. The link works, but the cursor does not change from a pointed finger, the standard link icon.

  I don't know much JavaScript, but can understand it if it's just adding the code. This has been done in CS3. Any help would be appreciated! Here is the code:

  function MM_openBrWindow (theURL, winName, features) {//v2.0
  Window.Open (Theurl, winName, Features);
  }

  Thanks in advance.

  Todd

  A link would be nice, but I suspect you aren't gettign the finger (you know what I mean) when you hover over the link as your href is not defined on anything whatsoever.

  
  Set your href on ' # ' or ' javascript:; -the latter is preferred.
  		   

• Copy one file to another layer in PScc2014

  I think I saw a way to copy a layer from one file to another, when I'm in the consolidate all to tabs mode. Visible image one slide, or otherwise a layer to one of the tabs at the top of the window and this copy the layer to the image on this tab.

  I can't get it to work,

  I don't know about the 'double layer' selection in the layers panel, but there seems to be another faster way. I imagine this?

  I use iMac, Yosemite.

  Thank you

  Vince

  Same thing here. Photoshop CC, Yosemite.

  What you are to select the layer on the source document that you will move. Use Opt + eyeball to hide all other layers, so you can see clearly what you are moving. Do not do anything dragging them from the layer panel, open the document window.

  Then select the tool travel, go in the document window and drag this layer on the other file document tab until it opens.

  Then, drag and drop in your destination document. You could hold down the SHIFT key if you want to Center until you drop.

  It works in CC and CC 2014.

  Gene