Why: Data control not extensible/empty - flow ADF based task entry on HT.

Similar Questions

• Detail table data control not insert data

  Hello

  I use JDev 11.1.2.4 and fusion web application, I have 2 main table and, when I run APP module and insert data in the table in detail its registered successfully, but when I drag the VO of the data control to af:form some data and other will be null.

  Any suggestion?

  Concerning

  Finally I found the solution

  https://forums.Oracle.com/message/10493807

• Why adobe does not offers a warm conditions based incentive for software is it better to keep people uninformed?

  Adobe does not like to educate the user money is spent, but nothing is won... What are the benefits of software, as appropriate?

  Cloud Plans https://creative.adobe.com/plans

  -Special photography Plan includes Photoshop & Lightroom and Bridge & Mobile Lightroom

  - Https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html problem

  -Lightroom Version 6 http://www.lightroomqueen.com/lightroom-cc6-myths-confusion/

  -Special photography Plan includes 2 gigabytes of storage cloud (not the 20Gig of the comprehensive plan)

  -http://helpx.adobe.com/creative-cloud/faq/mobileapps.html

  -http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html

  - and conditions for subscription http://www.adobe.com/misc/subscription_terms.html

  -What is in the set of Cloud http://www.adobe.com/creativecloud/catalog/desktop.html

  -http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html

  http://www.Adobe.com/products/creativecloud/FAQ.html

  http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq

  What is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  To start https://helpx.adobe.com/creative-cloud.html the Cloud

• ADF task flows and parameters WITHOUT data controls

  Hello world.
  
  In a previous post, I asked him about the best way to call the workflow "at a distance" by a "local" application Frank Nimphius suggested me to use the JAR ADF libraries between projects for this. I'll apply, but I have a small/big problem:
  
  As I said in my previous post, I exclusively use the EJB 3.0 - JPA technology in all my projects. The components business or data controls are used. Just a lot of Java-based components.
  
  Now, supossed that I have a (based in the HR schema) application with 3 projects:
  
  -L' one with all things EJB: entities from tables, session bean, and an example of a Java client.
  -The second as a 'local' point of view, with a JSPX (viewLocations.jspx) page that contains the table of communities (table_locations).
  -The third view "at a distance", with a JSPX too (viewCountries.jspx) page that contains the table of countries (table_countries).
  
  I have a button in views the remote, and one to switch from local to remote display and the other for the opposite.
  
  The goal is: pass a location of choice of table of locations for the project where I need to see the country for the selected location.
  
  In the table of locations, I use a variable currentLocation (declared as: private location currentLocation = new Locations() ;) to store the selected location and a SelectionListener process, called selectLocation_listener() with this code in the)
  backing.viewLocations.ViewLocations.java:
  
  + ' public void selectLocation_listener (SelectionEvent selectionEvent) {+
  + / / Add code from the event here... +.
  currentLocation = (rentals) table_locations.getSelectedRowData ();
  +}+
  
  If the selected location is stored in the variable currentLocation.
  
  Both in projects the and remote, in that I store the task flow JSPX pages. I have the taskLocal.xml as an unlimited workflow with the viewLocations.jspx as the main view and the taskRemote.xml as a workflow bounded with the viewCountries.jspx as the main view.
  
  I have deployed the project remotely in a library JAR ADF and imported to the local project, then I get it as a special activity Flow call.
  
  The question is: How can I pass the variable currentLocation as a workflow setting to my project remotely? I don't have any data control to bind to a workflow parameter.
  Should I really have some control of data to store my currentLocation variable and bind it to a parameter? Or there is another way without data controls?
  
  Another fact: local and remote project have a dependency with the EJB project.
  What about dependencies? Have a role in call task workflow activities?
  
  Thanks in advance.
  
  If you would like more information or a more detailed explanation please ask me.

  Hello

  a data control is needed for this. If you only want to use ADF task Flow and manage the component UI lie yourself, then you are good to go with this approach. To add parameters to a call from bounded task flows, have a look here

  http://download.Oracle.com/docs/CD/E15523_01/Web.1111/b31974/TOC.htm (Chapter 15, activities of view URL using 15.3)

  You can make the local variable that is accessible from an accessor method Set/getter bean managed so that you can use EL when you set the value of the parameter.

  Frank

• Data control for the Web Service based filter table adf only appear not

  I have a SOAP web service I'm consumption as a web service data control.

  When I use one of the results of the web service through data to the web service in the form of a table control in the user interface with the filter and sort, I don't see the filters on the top of the table.

  It comes to JDeveloper version 11.1.1.7.

  Please let me know if anyone has an idea on this issue.

  TIA

  ABS

  You need connect your own logic on the filtering table.

  The table doesn't actually do the filter - it does, is the data control to filter the info - for a Web service we do not know how it will actually make a sort-, so you'll need to add a filterListener on the table and call a WS that will be returned the filtered data method.

• Oracle ADF Form Data was not added to DB.

  I created a VO(I have given Updatable:Always and i have checked in source that IsUpdateable="true") based query and added that in the morning, I created a form with CreateInsert operation ADF, when click button CreateInsert he created an empty form.
  After be the Date in this field empty, when I click on the button of validation Data is not recording in DB.
  After that,.
  I appointed a Readonly array with the iterator, when I click "Commit" it was seedlings that are adding data to the New line in this Table Readonly, but when I was checking in DB, The Data is not added to DB
  I use 11.1.2.3.0 version jdeveloper.
  
  Any help is appreciated...
  
  Published by: René Thippireddy on February 4, 2013 08:47

  You're wrong on a conceptual level. A VO based on a query is not insert/update/delete all DB data. You create a VO based on the entity, if you want to make insertion/update / deletion of data in DB.

  When you run a commit on an AM operation, he finds objects of entity created/modified/deleted, and then performs the corresponding DML operations on DB. (In fact, DML operations are performed by objects of entity. Is there is no entity object, then there is no DML operation). If your VO is not based on the entity (but based on a query), you have not all ADF created/modified/deleted entities, so there are noted for the outcrop of the DB.

  The property 'Can' of the VO attribute controls whether VO should allow entry of data or the modification of these attributes in memory. You can have the basic attributes other than the entities that are marked as "editable" (for example, transient attributes store temporary values in memory), but this does not mean that these attributes will be emptied to DB.

  You've seen the data in the table read-only, because it is based on the VO even and it displays the newly created line, which is in memory.

  Dimitar

  Published by: Dimitar Dimitrov on February 4, 2013 19:00

• Pagination not working not not for POJO data control

  I'm running 37 sample downloaded from here.  The PDF indicates to post in this forum for issues found examples so here I am.

  037. how to build the pagination in the POJO ADF data control

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

  He's talking about Add method to handle paging that takes the index and the beach

  	method called by the link layer of ADF to run paging
  	public list < employees > Edgeham (int index, int range) {}

  However when I run the sample and set a breakpoint on this method, this method never is called. Only the method that retrieves the entire list is called.  Table extracted data ranges that I scroll to the bottom and I see data recovery... popup, but because this method is not called is not really paging to the model only at the link layer, so I don't have any focal point for range all the way to the service call to a web service to support paging.

  No idea how to operate paging?

  Never mind.  I found the problem.  I didn't know that the example had not been fully implemented.  The instructions say to add a DataControlHandler to the DataControls.dcx and which had not been done.  It works after I added that.

  <>

  definition BeanClass = "oracle.pojo.facade.SessionFacade"

  DataControlHandler = "oracle.adf.model.adapter.bean.DataFilterHandler"

  xmlns ="http://xmlns.oracle.com/adfm/adapter/bean" / > ".

• Data controls do not reflect changes in class view Impl

  Hello
  
  I've added a method in one of the viewImpl.java file and add a customer interface for this method. I think it shows the data controls and under this point of view. But I didn't know that I leave the JDeveloper and restart the IDE. I have to lack some refreshing affecting somewhere I tried view-> refresh but did not work. Could - what someone knows why?
  
  Thank you

  Click on the button refresh top right of the accordion of data control (blue arrows in a circle).

• Found no "ADF data controls" in ADF 10.1.3.1.0 tutorial chapter 2

  Hello
  
  I'm currently learning Oracle ADF followed 10.1.3.1.0 tutorial. (September 2006 revision), I installed Oracle Jdeveloper 10.1.3.2.0 on my pc with 10.2.0.2 remote database connection.
  
  In the man page 2-17, the final step in this chapter, she prays to create data ADF controls associated with SRPublicFacadeBean.java. It is said, click the SRPublicFacadeBean.java node and choose 'create the data control' from the context menu. However, I couldn't find this option in the context menu. No one knows why it happened.
  
  Thanks in advance
  
  Sean
  
  Published by: ma_sean on October 8, 2008 16:14

  Have you installed the J2EE of JDeveloper or the Studio edition?
  You need the studio edition can create data controls.

• Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

  Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

  If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

  Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

  Thank you!

  This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

• What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Hi all

  I am new to TestStand. Still in the learning process.

  What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Thanks in advance,

  LaVIEWan

  I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

• How to bind RichTextbox of ADF / Data Control Jdeveloper 11g R1

  Hello

  Can you please help me to link RichTextbox of ADF / Data Control in Jdeveloper.

  I am able to bind to inputText, button. But impossible to find for Richtextbox.

  

  Thank you

  Swathi

  GoTo pagedef and add the attribute binding in the bindings section

  Steps-

  Click the Green more icon--> to select in the generic links section attribute values--> click Ok--> select data source, and the attribute and then click Ok

  Then select on the RichTextEditor page editor and write in the value property that's how - #{bindings. AttributeName.inputValue}

  
  

  Ashish

• Data control does not display THAT POJO returned by the method

  Hello

  I am running JDev 11.1.1.7. In my AppModule.impl, I created a method that returns a simple POJO (which implements serializable) that has two fields of type string. I exposed the method in the client interface of appmodule. In the control of data, the method appears with an element of return instead of an object or any way to access the two fields of type string. I want to display two fields of type string in the output text components on my jspx page. I'm not find documentation on how to do it. Can someone point me to the documentation or tell me how to make this change to the method of control of the return data?

  Thanks in advance,

  Steve

  AM method can return the custom type, but as much as I know there is no support for introspection of object at design time.

  (so you can call it programmatically and cast to the appropriate type, but you can do component DND data control).

  So, option 1 is to bind the value property of your outputText managed bean fields, programmatically calling AM, fill these properties manually and update your user interface components (note that managed bean must be saved in viewScope or more in order to preserve the values)

  Option 2 is to create the Bean DataControl (with this you will have DND support)

  Dario

• Client interface methods not found in the data control

  Hello

  JDev 11.1.2.4

  I exposed some methods by including them in the client interface of my module of the application. I tested the app module and I can call methods. I refreshed the data control, but I do not see the data control methods. I have several other client application with interface module and I can see the operation. I only have the problem with this module of the application.

  Any ideas?

  Thank you

  Close jdev, delete the folder the model project of the module of the application classes and the classes folder of the project view controller where you want to use the datacontrol, start jdev, recompile the project model (and deploy the lib, if you use the library), recompile the view controller and finally see if you see the methods in the datacontrol.

  Timo

• Select multiple choice based on the data control does not not value in the correct form

  Hello, I am using JDeveloper 12.1.2

  I made a choice of several select based on an attribute of the year to a data control and I have a method in my managed bean that retrieves the selected values in the select choice of many, and on the basis that I want to do some queries, but the value that returns the selection is not the value of the attribute is the value of memory (or what is the correct value name..)

  Here is the code:

  < af:selectManyChoice value = "#{bindings." Label AnoList1.inputValue}' = 'Ano '.

  ID = "smc1.

  valueChangeListener = "#{OBIEE_managed_bean.» AnoListSelection}.

  autoSubmit = 'true '.

  Binding = "#{OBIEE_managed_bean.anoListBinding} '"

  immediate = "true" >

  < f: selectItems value = "#{bindings." AnoList1.items}"id ="si1"/ >

  < f: validator binding = "#{bindings." AnoList1.validator} "/ >"

  < / af:selectManyChoice >

  Managed bean:

  public void AnoListSelection (ValueChangeEvent valueChangeEvent) {}

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  try {}

  System.out.println ("Valor link yearChoice:" + anoListBinding.getValue () m:System.NET.SocketAddress.ToString ());

  ...

  The output is as follows:

  Valor link yearChoice: [Ljava.lang.Object;@4939cade

  Year: Ljava.lang.Object;@7135da60

  This normally happens when the toString is not defined, but how I have to fix this? Someone at - it had the same problem? Any advice?

  Kind regards

  Frederico.

  Hi Frederico

  I'm fine hope you are too.

  Sorry, but you can try

  {for (Object item: (Object []) {valueChangeEvent.getNewValue ())}

  System.out.println (Item.ToString ());

  }

  This should give you something.