Why do I get blank images with keywords on a Lightroom 3 catalog restore?

Similar Questions

• Why do I get black images?

  I get sometimes black images when I open an image on Facebook and other sites. Often when I have several tabs open. I tried the following, but it did not help at all:

  -clean money
  -Make sure that the site permissions do not block the images.
  -no antivirus interferes with the browser
  -execution of Firefox in "safe mode" with all add-ons disabled
  -Reinstall Firefox

  This does not happen with other browsers. So, it seems to me that this is a bug in Firefox. I use Firefox 10 with Windows XP SP3.

  Any ideas?

  Thank you
  Mido

  So, you still have the problem saving mode?

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Why do I get a popup with Windows Installer when I open a program used with Explorer.

  Original title: pop-up Windows Installer

  Can anyone help with why I get a Windows Installer popup on opening a program used with Explorer.  Does not happen with Google Chrome.

  Hello

  1. is it that occur when you use internet Explorer?

  2. don't you make recent changes?

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

• When you click on a zip file, why IE 9 get blank white page after page, sometimes as much as 20 + pages?

  I have Vista SP2, IE 9, also Mozilla Firefox browser.  I can download .zip files, but when I click it, IE starts to throw blank pages on my screen and it usually takes 20 to 30 minutes to get rid of them.  In the third, I started to understand that it happens with zip files.  I have received information from a friend that happens when you install a program like Winzip, etc., then remove.  I think I probably do.   I tried to combine a zip file with Windows Explorer, not Internet Explorer, but it happened again.   If I click on a zip file in Mozilla, it always happens with blank pages of IE.

  Hello

  Did you do any change before this problem?

  Step 1:

  Try the patch from this link: http://support.microsoft.com/kb/950505

  Step 2:

  Try to create a new user account and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the step above help then try this also: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile

  I hope that helps!

• Why do I get error-70027 with SofMotion?

  I'm trying to run a LabVIEW RealTime application that uses SoftMotion. I created an axis in the RT of the project target. Every time when I use the axis with SoftMotion works and launch it on the RT-rarget (cRIO-9066) I get the error-70027 (a function call made to motion control, the timeout to wait for access to a shared resource). When I connect the axis function of flaws clearly this function generates des-70027. I don't know what this error tells me.

  Hey Jake,

  I managed to get rid of the error by doing a right-click in the project on the target RT and select utilities. Turn it back on. After that, I am able to run my code without errors. I'm not exactly sure wat causes this error, but I guess I'll run in new I will post it here as soon as I know, but for now I think this is resolved.

  Thanks again for your support!

  Kind regards

  Steffan

• Why do I get signals ghosts with the meter?

  Hi, I am able period using the NI 9401 on a cDAQ9174 chassis.  I have a sensor whose output is 50mV LO and HI 4500mV, and this is easily measured with a scope and a DMM.  Furthermore, the scope shows very clean transition, no noise near the 2, 5V TTL threshold.  The probe monitors pattern reflecting on a spinning wheel.  Measures the time of the order of less than 0.3 seconds, but, curiously, the measurement period seems to be good for a few cycles, and then suddenly these values close to ZERO are observed. (Excel data show these values literally '0'.)  What is c?  Where are these unwanted readings from?

  Also, see the code that I use to record data from the period, and a typical example of the data plotted in Excel.  One thing I'm confused about is the timer in the WHILE loop.  How the meter may return a value that is smaller than the function parameter WAITING in the WHILE loop?  The WAIT function is set to 100ms, but the meter will return to values far less than 50ms.

  Is there a way to remove these values in the software?  For example, can I just throw any value less than 0.050 seconds?  This kind of fix would be perfect for our application; It's a little gross, but she would get me to the next step in our project.

  I really appreciate your comments!  This photointerrupter is supposed to have the advantage of being a camera and free of noise in the environment, up to now, the only noise in our environment is the small DC motor spin our wheel on our lab bench... not a harsh environment at all.

  Dave

  Hi Dave,.

  That's what I think is happening here.  In the configuration of the measurement of a meter task period DAQmx, the source of the signal is connected to the door of the meter and the internal time base is used as a source.  When the input signal is HI at the entrance to the Terminal, a count is saved for each rising edge of the timbase to the source of the Terminal.  When the signal of door to LO County is drawn from the register in the buffer and legumes subsequent source are ignored until the door is HI again.

  Now assume that the signal of your door is swinging very quickly prior to staying at the State HI or LO.  Whenever a HI LO oscillation occurred, a count would be drawn from the register of the meter.  If this rise and fall of the door happened quickly enough, it is quite possible that very few or none of the timebase impulses were actually counted to the source terminal, thus recording a very low double value in a buffer of the computer.  When these sets of values has been extracted from the buffer and written into the worksheet, accuracy of scripture to the worksheet VI may have been set to the default 3 decimal, so write "0" s to the file.

  The speed of the swing may be the order of 10 to 100 ns, fast enough at your fingertips, do not register.  The quote that I copied the help file describes the behavior with the digital filter enabled.  When you apply the digital filter, a county is not from the register unless the signal of the door remains HI for a fixed minimum amount of time.  With the filter, the period 0 counts are not sent to the buffer because the door is not HI for the minimum period of time.

  Brian

• Why do I get error 66 with cRIO and STM library after 6 hours

  I have a RT (for the cRIO-9004 controller) software and a host software (on my development computer) which Exchange data through the STM library. Everything works fine, but after about 6 hours, the host stops with a message 'error 66 in STM Read Msg.vi'. Why does this happen? I use LV 8.2 and the STM 1.0.32 library.

  Thanks in advance.

  Hi all,.

  would it not possible to send your project RT together in order to test it. Make sure that the SubVIs are included. Thank you! Perhaps one of the possible reasons for your error is that your VI uses 100% of the capacity of the CPU for communication over TCP/IP breaks down due to a leak of resources, because the priority of the screw is higher. Check the use of the CPU resources when running.

  Concerning

  Greg

• Why do I get the "open with" screen every time I try to open a program?

  Whenever I try to open a program it shows full-screen. As for example... I opened firefox and it comes up with the open with screen so I take the option of firefox, then it said Open firefox.exe. He said: ' you have chosen to open firefox.exe which is a: application to: C:\program files\mozilla firefox would you like to save this file? "so I press Cancel because it's my only option and then I can use it. So if I try to open anything up as OBJECTIVE online, I get an error message saying "application not found" I push OK and then work.

  Hello

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  1. try the steps listed in the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Why do I get fuzzy jpeg with illustrator cs6?

  I compared the options with the cs3 version, these are the same, but I have the problem that the cs6

  prossitaly,

  If you create a RGB JPEG, you can use save for Web (& Devices) (with maximum quality) and set the number of pixels in the field W or H in the window to the size of the Image; This is also where the Anti Aliasing option or optimized text/Art is. You can simply create a PNG or GIF with the same specifications (addition of transparency in the window main, of course).

  If you export to JPEG (or whatever), you can set the resolution in PPI (and set the Maximum quality).

  It depends only on the size of the work in the sense that save it for Web mainly use 72 DPI, unless indicated otherwise, and that both the DPI of export applies to the actual size.

  This means that you can set the work to the same size in points/pixels as the desired pixel x pixel size using save for Web (or simply change the value final (s) in the window to the size of the Image).

  Similarly, you can set the work to the same size as the final size to the planned resolution (or simply to change the resolution in proportion (reverse); If you want the image to be 300 PPI to double the size, select a resolution of 600 DPI and similarly for other values).

• Why do I get an offset with analog input

  
  

  Hello

  Thanks for posting your question on the forum.  I suspect that there may be a problem with
  the grounding.  I recommend looking through
  Developer Zone article, field wiring and analog noise considerations
  Signals, which describes in detail how to properly ground a signal.

  The important things to note are that you have a floating
  the source signal (unrelated to the construction on the ground) or an earthing and the
  setting input of your measurement (differential, referenced asymmetric,)
  non-references asymmetric).  For
  example, if you have a floating source and you try to measure the
  signal in differential mode, you must add two resistances (between
  10kOhms and 100kohms) to land correctly signal.  Resistance would HAVE + AI GND and
  other resistors would connect I - of AI GND.

  Post back with more details about your configuration of source and the input of the signal if you need more help.

• How can I get additional images with stock ownership plan 10 images/MB adobe?

  I bought the adobe stock plan that gives you 10 pictures per month. I downloaded 10 images and I want to upload an image for the $2.99 / picture but when I click on 'Buy license & record office' it gives me an error that says my team used 10 free images and I need to contact the administrator of the team for a subscription. I am the administrator of the team. When I look at the options he says my current plan is to 10 Images per month. How to buy an image 11?

  Hello

  10 free images have been added to your account of the team and they have all been used.

  You have purchased an individual subscription of Stock so the images show under your personal account rather than on behalf of the team.  When you connect to stock.adobe.com Please select personal account - you have currently 9 available image credits.

  

  I hope this helps.

  Thank you

  Bev

• Why do I get a vunerability with Firefox tips

  After I do a scan of vulnerability of Kaspersky I get advice from following detail: c:\Program Files\Mozilla Firefox\firefox exe.

  I Update to the latest version 50.0.1 and vulnerability always appears. Is this dangerous? I ignored? How to fix?

  Thank you.

• Why do I get blank bubbles in SMS

  When receiving emoticons by text from people on another carrier, he sends me an empty bubble. How can I fix it?

  Are they send Apple devices?

• Why do I get an error with Firefox TLS, but was successful when switch to Internet explore?

  I made an online transaction, you press 'go' (or its equivalent) and received the TLS connection failure message.

  I went to Internet Explorer, and 'go' went well first time.

  Firefox recently removed for some obsolete versions, insecuritees of TLS. You should contact the site owners asking them to upgrade to a newer version. Other browsers also plan to remove these versions in favor in the future as well.

• Why do I get recurring problems with updates?

  I still have 2 check n install updates manually... these effects so many areas of my computer not working properly... it is so frushtrating... also when I play games of the performance is terrible... ty

  First, make sure that Windows Update is configured properly and automatic update is enabled.

  Second, if Windows Update fails to install updates, fix it.
  Thirdly, use Free Secunia PSI for automatic update of non-Microsoft software (Adobe Flash Player, Adobe Reader, Oracle Java SE, etc.).