Why Firefox 4 does not support Norton Passcards?

Similar Questions

• Why firefox 7 does not support 7.4.2 roboform? He supported all rest of ther

  I just upgraded to v6 where roboform has been supported, when I upgraded to v7 not supported roboform. I want why as I can no longer fill out forms when they are needed!
  Concerning
  Bernard Riley

  http://www.RoboForm.com/support/news
  
  Install Roboform v7.5.0 for compatibility with Firefox 7.

• Why Firefox Sync does not work on my home network, but at work?

  Firefox Sync on my laptop does not work when my laptop is connected to my home network, but for example if I'm at my desk.

  The internet connection in my house is fine, I can surf the web with this same Firefox on IPv4 and IPv6, DNS etc. also works. Connection to accounts.firefox.com works also, as Firefox for the sync account. Only the synchronization process runs aground. On my desktop at home, I have exactly the same problems. When I open https://sync-209-us-west-2.sync.services.mozilla.com/ in a browser tab, I see a confirmation message that synchronization runs on this server, so apparently the network path between my computer and this server is free.

  After investigation with Wireshark, I see the TLS negotiation successfully, then packages the client was able to respond and after some time, the server closes the connection (encrypted alert). Apparently, no content is transferred between the client and the server. I have attached a screenshot of how Wireshark sees the conversation between the server and the client (sending pictures here did not work so I put on the web: http://ibin.co/1zXABHKdj5mA).

  To exclude a possible configuration problem or bad module, I created a clean Firefox profile and logged into my account in Firefox, but this shows exactly the same problems.

  Fun fact: Firefox on my Android phone will sync on my home network.

  Below, I will link two logs, a successful synchronization (corporate network) and a synchronization failed (home network):
  Sync @ Office: http://pastebin.com/rZmfrbdL
  Sync @ home: http://pastebin.com/a3KUCevJ

  The problem seems to be with your ISP - you can refer to https://bugzilla.mozilla.org/show_bug.cgi?id=1118958 and they may be able to find a workaround by changing your diet or to help you configure a different MTU for the network.

  I hope this helps.

  Mark

• Why Firefox 5 does not read the video tags HTML5?

  Trying to get HTML5 video to work in Firefox 4 and 5. It does not work. I used Fireogg to process the video, but all I get is a large "X" on the screen. The code I am using works in Safari, Opera and Chrome. This has happened for months now and I don't appreciate having to go through hoops to do such a simple thing for Firefox. This is absurd. All other browsers work. Find the code below.

  You are welcome

• Why tree DND does not support COPY or INSERT?

  The mx:Tree default drag - move only supports the MOVE. For example, you can drag an item from the tree and _move_ to tree B but cannot _add_ that the point b of the tree, unless you extend mx.controls.Tree, override dragDropHandler() and dragCompleteHandler() and, if lucky, write the right logic to calculate the insertion point and insert into the right place in the data structure tree, etc. etc.
  
  Why application developers should do this just to add items from a tree to another?

  I managed to do the minimum work to get what I need: drag and copy items from one tree to another. I outweigh tree: dragDropHandler () - If this is a MOVE operation, call great; Otherwise, I copied the MOVE code in Tree.as (less than 50 lines), then eliminated controls if (MOVE); with a little cheating on the namespace, the code simply works!
  It is still beyond me why this behavior is not embedded in the Tree.as.

  BTW, thanks for the pointer to the new DND doc!

  -James

• Why Flash Player does not support Windows Vista 64-bit?

  Why Flash Player doesn't support Vista 64-bit?

  Hello

  The answer must come through Adobe.

  Flash Player Help / Flash Player | 64-bit operating systems
  http://helpx.Adobe.com/Flash-Player/KB/Flash-Player-64-bit-operating.html

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why Firefox (ONLY) does not require approval (Microsoft user account control) to work with Windows 7?

  The 'pop-up' Microsoft Security window began to show two days ago, whenever I start Firefox. No other program does require this authorization. There has been NO change to the computer (hardware or software).

  Check that you are not Firefox running as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• Why Firefox Sync does not include the favicon?

  Mozilla are you planning support favicons for Firefox Sync?

  This is in the roadmap and almost ready to be launched: https://wiki.mozilla.org/Services/Sync/FxSync/FaviconSync

• Why NM5.5 does not recognize Norton IS 2010 firewall and antivirus?

  I installed Network Magic 5.5 and a new router Linksys WRT610N.  All connections work fine.  But I constantly receive alerts in say n my firewall and antivirus (both EAST Norton 2010) are off and not installed?  I have to configure something in NM? or is this a bug?  Thank you.

  grayranch wrote:

  I installed Network Magic 5.5 and a new router Linksys WRT610N.  All connections work fine.  But I constantly receive alerts in say n my firewall and antivirus (both EAST Norton 2010) are off and not installed?  I have to configure something in NM? or is this a bug?  Thank you.

  Hi grayranch,

  You don't need to configure anything. The next version of Network Magic should recognize the new versions of McAfee and Norton as well as others.

• Why Adobe Story does not support iPad?

  Adobe Story should run on iPad - flash or not - will be Adobe will finally create an iPad app work or work around?

  Hi, PJP,.

  Adobe Story should run on iPad - flash or not - will be Adobe will finally create an iPad app work or work around?

  Sorry, but we do not currently have an iPad app for the story that supports script creation. This is a feature request. Please be sure that here.

  Thank you
  Kevin

• Why the ins does not support for vista? Is that what we write in the script of the ins in support for vista?

  Hi I'm new to nsis. I used nsis to create an installer for all versions of windows, but the problem is that his works well for windows XP, 7 not for windows vista. Is there the thing to mention explicitly in the nsi script?

  Thanks in advance...

  Hello

  Your question of Windows Vista is better suited for the MSDN forums. You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/threads

  It will be useful.

• Why the servlet does not support request.setParameter?

  I can do request.setAttribute but not request.setParameter in a servlet. No reason?

  Because the query parameters are supposed to come from the customer. All of the query is read-only. Request attributes are not part of the application, they are things that servlet is added during processing.

• Why LabVIEW 2012 does not support USB-6009?

  Hi all

  I recently installed LabVIEW 2012 and DAQmx 9.6 (and also tried with latest version) in my PC with Windows 7. I have the version of Explorer 5.4 measure and automation. I'm working with hardware DAQ USB 6009. Everything seems compatible, but when I try to post data acquisition, it fails. However, I used to use this device (since I bought it last year) with the other PC that has the Windows XP operating system and the older version of LabVIEW 8.5.

  What can I do with LabVIEW 2012 is a message "a 88302 error has occurred." and "This could be an internal error."

  If someone has an idea to solve the problem, please let me know.

  devkotaj

  Hi devkotaj,

  The USB-6009 device should work perfectly on Windows 7 with the software you have listed. This looks like a problem of configuraiton of material for me.

  What are you trying to do when you receive the error 88302? This error usually indicates a corrupt DAQmx driver, which may result from the installation of several DAQmx versions on the same machine. Have you tried repairing your installation DAQmx? I could uninstall DAQmx from the Control Panel before installing the latest driver. You can see our procedure to reinstall or uninstall recommenedd here.

  I hope this helps!

  Andy C.

  Engineering applications

  National Instruments

• Why Windows security does not detect my Norton 360 antivirus?

  In the Windows Security Center it says that windows cannot find my virus protection program. Why? I have Norton 360, which is compatible with Vista.  I primarily use internet explore. Although, sometimes, I use firefox, which I believe does not support norton. Can someone help me. Thank you.

  Here is an article from Microsoft that can help you to solve this problem: http://support.microsoft.com/KB/952923.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Norton does not support firefox 15

  Just installed Firefox on a Mac 10.5 15.0. Norton has published an alert that Norton Confidential does not support this version and may not protect against phishing, is this true?

  Moderator Note: If you have a question, please ask a question. This will ensure your question gets the attention it deserves. Given that this thread is old and already has chosen a solution, it will be locked to prevent further post.

  https://community.Norton.com/T5/Norton-toolbar-Norton-identity/Firefox-15-support-for-Norton-toolbar/TD-p/791174 try to update your Norton. Also, just so you know, Firefox has it's own built in protection against Phishing, you don't need the Norton toolbar.