Why I failed when I sign my application?

Similar Questions

• Why Labview block when you switch one application of TestStand to another?

  I have several 2013 TestStand applications that use a number of LabView 2013 screws on a test computer.  When the driver leaves a TestStand program and opens another often Labview does not close properly and therefore what TestStand tries to load the LabView VIs, it is caught or pass just and fails every test that is affected by LabView.  The only potential problems I know are that two of the applications have been created in LabView 2009 and then updated to 2013.  Then two other TestStand created applications in 2013 use the function 'UnloadAllModules '.

  Are there known issues with LabView 2013 causing it or ideas of what I could do wrong?

  Hello Michael,

  I found my problem.  In my case a VI don't was get closed in cleaning because of the previous command don't failed Manager correctly.  This VI would remain open and when I ran another TestStand sequence, when he tried to load that LabView VI he would just stroll.  But the result of this error could be seen when I closed TestStand and LabView are left open (since it was frozen) or execute the sequence and its closure.  So if you tried to LabView pop - up it wouldn't show the start start screen because it had frozen.

  I found the problem by activating the option view the façade VI in TestStand for all calls of VI.  The VI that remained open was the problem VI.

  Thanks to all who responded to your help!

  Kurtus

• Why after a year Adobe CC that I pay for every month says that I have a trial even when I signed repeatedly in a day?

  Why after a year Adobe CC that I pay for every month says that I have a trial even when I signed repeatedly in a day?

  Hello

  Please check this Creative Cloud applications unexpectedly back in the test mode. CCM, CS6

  Let us know if this helps!

  Kind regards

  Sandrine

• The upgrade of my application fails (when it is registered with PhoneLogs)

  I use Desktop Manager to install/upgrade the java application, I am writing to you.  My application is configured to run automatically at startup function.

  1. when I just install my java application (which means that it is not on the device), it installs and works fine.

  2. when I update my application, the phone restarts, fails it application (IE not dΘmarre).  More clearly, if I go to the icon and click on it, nothing happens.

  3-if I delete the app, reboot the phone and install the application, it is very good (line with scenario 1 above).

  I narrowed down it to 1 line of code that makes the difference:

  PhoneLogs.getInstance () .addListener (myPhoneLogListener);

  If I don't register my app/process with the PhoneLog, upgrading the app has managed in all scenarios.  I guess that's because one of my 'myPhoneLogListener' objects is in the memory space of the PhoneLog at the time of the upgrade.  Also, my application is running at the time of the upgrade.  The application is still running in the background, intentionally.

  I would try an OTA update to see if it behaves differently, but I don't have any private location secure to host my app.

  How to make this upgrade work, without requiring the user to quit the application before the upgrade; given that I can't guarantee that users will do, and I don't have to have a bad experience with my application.

  I'm writing my own solution for others in the future.

  So before in my MAIN() method, I capture all the Exceptions and out in silence.  This was to avoid the dreaded AppError-200 during development.

  So I added a try/catch in my MAIN() to write all the Exceptions in the event on the device log, before to leave.  It turns out, I was getting a "ControlledAccessException.

  So, I decided to add a Thread.sleep (30000)-30 seconds before trying to run my problematic registration code.

  Good news and bad news, it worked.  But that tells me that there are a few occurring in race condition.  Well, I have no other choice.  I hope this helps someone else out there...

• Why Adobe takes over your previous CS6 programs when you sign up for creative cloud and never use them, even after you have stopped using the cloud?

  When I signed up for the cloud, I used it for a while.  CS6 programs ran fine, but after I stopped using the cloud, CS6 programs were not usable.  They said they couldn't do anything.  I resigned from clouds and they worked again.  Now, even once, cancelled my subscription of cloud and CS6 does not work yet.  HMMM? !!  Coincidence?  Why Adobe divert my previous version of Creative Suite and make it unusable?  Because they want you on the cloud so that they always get money on your part!  Ridiculous!  It is very clear to me.  Adobe is a thief, twisted, manipulative and downright bad.

  How we stop to resume my perpetual license CS6 creative cloud?

  https://forums.Adobe.com/thread/1584746

• I get a message "uninstalled failed" when you try to uninstall all applications of CC 2014 and the cleaning tool is of no help. Any ideas?

  I get a message "uninstalled failed" when you try to uninstall all applications of CC 2014 and the cleaning tool is of no help. Any ideas?

  Hello

  If please close the process below for task/monitor activity Manager and try again.

  

  Hope that helps!

  Kind regards

  Sheena

• Why keep the program fails when I click Update

  Why keep the program fails when I click on update, in particular different editing software

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Cannot sign the application - cannot find the signature key file: author.p12

  Hi all.

  I have seen this error on several messages in the forum, but none of the suggested corrections works for me.

  I am signing my App BB10 ready to be distributed. It draws very well and I also installed the two relevant files of the LSB and followed the registration procedure. The author.p12 and other files exist in %HOMEPATH%\AppData\Local\Research In Motion

  However, when I try to run the following commands, it fails. I also tried to use the graphical help of BlackBerry Tablet OS and I get the same error.

  The only thing I noticed is if I run: echo %homepath%, the result is:------. I can't change what I am on Windows 7 on an Active Directory domain and any changes made to these environment variables does not stick.

  Is there a way to specify the path to the author.p12 file? Help, please! The output is below:

  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>bbwp C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7>"C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\third_party\node\windows\node.exe" "C:\Program Files\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.4.7\lib\bbwp.js" C:\Proj\App\Deployment\BlackBerry\build\MyApp.zip -g (password) -b 1 -o C:\Proj\Resources\CodeSigning\BlackBerry\BB10
  
  [BUILD]   Populating application source
  [BUILD]   Parsing config.xml
  [ERROR]   Cannot sign application - failed to find signing key file: author.p12
  

  Thank you.

  Jon

  I corrected myself. I realized all I had to do was to create a local user (no AD) on my machine, copy RIM folder my HOMEPATH to HOMEPATH to the local user, then run cmd.exe as the local user and sign the binary file. Worked fine!

• Installed SDK Gold, fail on the signing of record

  Hi, I recently installed the SDK, however, was before Beta 3

  When record signing, (when inputing .csj file) or create when the debugging token always fail

  He said:

  Record of long-term key error
  Error: Error: unable to register the client '1946622' because there is no more the record attempts. If you are already registered with this server, you must restore your backup signing keys. If you do not have a backup of the key, then you can order a new set of keys at www.blackberry.com/go/codesigning

  I'm already trying to get the new file .csj, but also in case of failure

  How to solve this problem?

  Thank you

  You don't need to re - install your code signing keys during the upgrade of your SDK.  In fact, the files of the LSB can be installed once.

  You should not change again code signing keys either or you will not be able to provide updates of your applications in the BlackBerry World.

• Why would I get a message "the application"Safari"is no longer open, and then he won't open?  Even a search on Fosfire allowed them to prevent me from using Safari?

  End of 2013 iMac 2.7 GHZ Intel Core 8 GB memory 2nx992F8J2 running OSX El Capitan 10.11.1 SN.   Why would I get a message "the application"Safari"is no longer open, and then he won't open?  I went online with Fire Fox and I continue to request now if I want Morel Fire Fox my primary.   Could they have blocked my Safari?  It is difficult to check on it when it won't even developed.

  I answer 'Lestoile.

  Who are "they".

• Writing PNG file failed when build exe, but operate normally on the development platform

  See photo below, it is used to call WinAPI for screenshot and then save it in PNG file. This Vi operate normally on the flatform of development, but it failed when building the application .exe file. The pop-up dialog error 'chain of illegal path, OS', but it is clear that the path is correct. Note: run the same PC with Win XP.

  

  Update:

  I found the reason, but not a solution. In fact, the Clipboard.Get Image does not work when building application exe. But it's the private node invoke, impossible to get support of NOR.

  It seems to be to the node to invoke public on the version of LabVIEW 2012, which can help you check on LV2012 version? Thank you very much.

• Problems with DAQmx - tasks missing when I run my application on another PC

  Hello

  I use a NI USB 6009 and my program use DAQmx and different tasks for the input and output signal.

  I created an application and I want to run this application on another PC, which doesn't have the development environment, but the runtime engine and installed MAX. This PC is connected to the NI USB 6009.

  Now, I have the problem that the tasks are missing on this PC and I get errors when I run the application.

  I wonder why these tasks are not put into the application automatically? What should I do now? Can I somehow export tasks in MAX and copy them to the other PC? Is not complicate it?

  Hi Johannes,

  Have you created your tasks of measurement and Automation Explorer?

  If this is the case, you must export the file of configuration of measurement and Automation Explorer and then import it on the other computer.

  With LabVIEW 2010, you can import a configuration via your Installer file, but I don't know if you can do it with LabVIEW 7.1

  Kind regards

• Error message: MatsGetSapCatalogue failed when I try to log on to Fixit Center.

  Original title: MatsGetSapCatalogue failed

  Why do I receive the message > MatsGetSapCatalogue failed< when="" i="" try="" to="" log="" on="" to="" fixit="" center?="">

   

  Hi Malgaff,

  Since you get this message when you try to log on to Fixit Center, you can post your query on Microsoft Fix center for assistance.

  Microsoft Fix it Center

• PB - question by signing the application. "Barsigner error: no manifest.

  I just received my set of keys of signature for the Playbook, and I try to sign my application, then send it to AppWorld when I fall on this issue...

  I pass the entire signature process

  blackberry-signer -csksetup -cskpass aFakePassword
  
  blackberry-signer -register -csjpin somePin -cskpass aFakePassword client-RDK-someNumbers.csj
  
  blackberry-keytool -genkeypair -keystore output_file.p12 -storepass aFakePassword -dname "cn=J. Mace" -alias author
  
  blackberry-signer -verbose -cskpass aFakePassword -keystore output_file.p12 -storepass aFakePassword Noteworthy.bar RDK
  

  Finally, when I run this last line, I get the error "error Barsigner: no manifest.

  blackberry-signer -keystore output_file.p12 -storepass aFakePassword Noteworthy.bar author
  

  has anyone seen this? I looked through this document of common error messages, but I don't see anything that helps. (http://docs.blackberry.com/en/developers/deliverables/23959/Configure_app_signing_from_cmd_line_1463...

  After a few fights with the signature process, it seemed to me signing an application successfully.

  I had to run bbwp to generate the file bar, but it still does not work on the portion of code signing.

  Then, I had to unzip the file bar and change the manifest because the version of the package has become messed (actually duplicated my version of the app at 1.0.1.1.0.1).

  Finally, I had to run Blackberry-signer to sign edited this BAR file.

  I spoke with Tim and Adam, and the word is that my scenerio is an anomaly, soon then...

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com