Why is it necessary to connect whenever I check the direct mail. It is a home computer with 2 people who use it. Very annoying!
Whenever I check my direct mail, I have to go by signing by giving my password. There is a computer at home with my husband and I use it. Very annoying!
You asked your question in a forum to post your comments on the web site of Microsoft Answers, is not for technical questions. Please ask your question in the center of WIndows Live Hotmail Portalsolutions.
Tags: Windows
Similar Questions
-
"Connection error. Check the Internet connection. »
I just installed my printer (an HP CM2320fxi upgrade). Everything works except ePrint/Web Services. The printer is connected directly to my router. It prints network computers. AirPrint works from iOS devices. It can scan to e-mail and documents are properly received by mail outside the network accounts (i.e. it must be connected to and talk to the internet). All the router firmware and the printer has been confirmed to date. all devices have been reset and restarted several times. However, if I try to activate HP Web Services for ePrint installation, I get the following error message: "connection error. Check the Internet connection. »
After struggling with this issue for many months, including many discussions phone and email exchanges with technical support from HP, they finally sent me a replacement printer. It works as advertised right out of the box. I don't know what was the underlying problem, but the fact is that he couldn't be corrected with one of the solutions proposed in the discussions on this forum. Apparently, there's HP printers out there with a lack of internet connection has nothing to do with a solution that is configurable by the user. If you have one, then you will need to replace your printer.
I can't thank HP for that. They tried my patience and tenacity of the months before offering the only real solution. They must know their products better than that and should have replaced my printer several months ago. That being said, the tech person with whom I had most of my relationships, it was a nice guy. I expect he's working under an edict on exhausting all possible tactics before agreeing to replace the unit.
Good luck!
-
I try to activate the Services Web of HP but connection error. Check the Internet connection. .
I use the static ip address with the address of the preferred DNS: 8.8.8.8 and 8.8.4.4 and it does not work.
I changed to DHCP as it does not work.
I have a ZTE home modem router connected to the printer.
The link below should help you.
http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/2585903
Kind regards
Oliver
-
Error message "connection error. Check the Internet connection. " When you try to enable Web Services on HP Laserjet 1606dn.
Operating system: Windows 7
Thanks for the help,
Howard
Last UPDATED 21/07/13: after upgrading the firmware to the latest version, I could enable web services. Great help has this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw
Thanks for trying to help.
In my case, it did not help.
I followed the instructions on this video: http://www.youtube.com/watch?v=Q5gpIGZXDXw.
The key was the update of the firmware, I think.
Walter
-
Does anyone know how to get rid of the calendar in the window Live on XP? I do not use it, and whenever I check my e-mail, it checks the calendar, slows things down to the top.
Thank you!Debnfurkidsoriginal title: get rid of the calendar in live mailHi Debnfurkids,
I recommend you post your query in Live Mail Forums for assistance on this issue.
-
Broad speed band
Hello. Why is always faster download speed when I check the speed u switch broadband compared with BT Speedtest? My ISP is BT. Thank you. Brian
Hi Brian,.I recommend you to get in touch with the Internet Service Provider (ISP) for more information on this issue, because the Internet speed depends on their service. -
I can't connect to the e-mail account on my other computer, keeps saying my mapi or outlook express, do not set up
Hello
· What is the exact error message that you receive with the error code?
· Do you remember all the recent changes on the computer before the show?
· What is the service pack installed?
Meanwhile, we can see: Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express: http://support.microsoft.com/kb/813514
-
Why am I not able to download any of the service packs for windows vista home edition
Why am I not able to download any of the service packs for windows vista home edition
Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
http://support.Microsoft.com/kb/948343How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
http://support.Microsoft.com/kb/947366Learn how to install Windows Vista Service Pack 1 (SP1)
http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspxLearn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx -
I try to turn on my LJ 1606dn ePrint. I downloaded and installed the firmware and that is okay. I went to the Web Services tab to get the code to register the printer. When I click on 'Activate' in the ePrint section, I get the error, "connection error. Check the internet connection. "My connection network and internet are working properly. Am I missing something? I need to open a port on my router? Is there a special song, I need reciting under the full moon while sacrificing a live chicken?
Thank you
Joe
jfusco,
If you have an IP address manually, assigned to the printer:
- Enter IP address of the printer in the Web browser address bar and press ENTER.
- Go to the network tab and the IPv4 Configuration of the page.
- In the DNS server settings, the entry in your domain DNS servers or put IP of the router Address in the preferred DNS server and 0.0.0.0 or 8.8.8.8 in the section auxiliary DNS server and apply the changes.
-
Whenever I hit the installer and run it, it comes up with a window with two buttons, an asset and a button at home. A small circle rotates around on the screen. Nothing ever happens in addition. I tried to re - download several times. What should I do? Here is a picture of what happens:
See if the following can help:
White screen
-
Why should I activate my iPhone whenever I change the SIM card?
Is there a way to stop this requirement without disabling find my iPhone? I have several SIM cards that I use in the different counties and it is really annoying when my phone asking me to activate using my Apple ID and an internet connection whenever I change my sim card. Is there a way to stop it?
Thank you
This should not happen (AFAIK). I use several SIMs when they travel, and it never happened to me. What iOS you run and if it is always passed or there started recently?
-
Hi all - can anyone help with this?
I have not changed anything, and when I try to enter my e-mail address Apple ID it tells me 'this e-mail address is already used as an alternate email address. Delete this e-mail from your e-mail address and try again.
This is my Apple ID no alternate mail.
I hope that all makes sense.
Thanks for your help!
Many people receive messages updating passwords and others. It seems that Apple has been strengthening security. I had to update my Apple ID and then I received messages whenever I logged on other devices to do the same. Then for weeks, then the system is far from ideal. Just this morning iCloud again requested authentication. Unfortunately there is little you can do. If you have an e-mail address, sign in to iCloud with it. If this does not call the Apple Support and let them guide you through it.
-
RTMPS connection delayed due to the direct connection attempt
Hello world
I have a big problem with the way the RTMPS connections are initiated in flash player.
One of my customer network infrastructure does not allow direct connections to my server via port 443, but allows connections proxified (using the CONNECT method).
The problem is that flash player expects the direct connection attempt to fail before trying the proxified... connection and on this direct infrastructure network connection timeout is 20 s (I can't change that).
Users must wait for this time to connect to the server...
Is there a way to tell the flash player do not attempt direct connection, or do not wait for this connection Timeout?
Perhaps a directive in the automatic proxy configuration (.pac) file?
I already tried every NetConnection proxyType values of parameter without success.
Any help would be appreciated!
You mentioned the 'CONNECT' method Have you tried "CONNECTOnly" that requires to initially use the default CONNECTION method and it is not always obey?
Documentation on NetConnection.proxyType:
Set the proxyType property before calling the NetConnection.connect() method.
...
If the property is set to "CONNECTOnly", the player first attempts to use the CONNECT method. If this fails, there is no relief.
-
Why CC there need my connection whenever I run a program CC?
On my 64 bit Windows 7 with some programs CS6 and CC system and the operation of an administrator with UAC account set to "never notify" I wonder for my connection pretty much whenever I run any program CC.
It is has been slowly themselves. It is not after any change of system, new installation CC or system change any other accident that I am aware.
I know that others have had this problem, but if there is a final fix available that I can't find.
Is there a solution?
I'll leave mandatory complaints about boring her it came out, but rest assured, they are there!
Thank you
Tom
Hi tswoolfinOH,
try this one: https://forums.adobe.com/thread/1300499
concerning
-
Why did I lose network connection whenever I put my PC in mode 'Hibernate' or 'sleep '?
The problem defined above didn't happen when I used Norton360 (over a period of 3 years).
But when I uninstalled Norton, then downloaded and installed Microsoft Essentials, suddenly everyone
time I put my Windows Vista PC to a low power state I lost my internet connection when I tried
to return to my programs and works perfectly.It's my duty to go through the entire process of starting again.
"Sleep my mode" doesn't seem to work as he always used to.Y at - it a fix for this problem?
Thank you for your attention.
marlem388
Try to turn off the power-saving features in both the wired nic / wireless
Maybe you are looking for
-
a downloaded file is supposed to be stored in a file, but it isn't here.
I downloaded a file, my preferences show that it must be registered in a certain folder, when I go in this folder, that he's not here... Help, please
-
How do you add an earlier version of the iso to your device list?
How do you add an earlier version of the iso to your device list?
-
Hi, I ran out of storage in my windows partition so I partitioned another 15 concert which has now disappeared and only shows as "Untitled" and when I go to select windows in the Mac boot menu, it doesn't show
-
HP officejet 4500 g510N Wireless does not scan full page
I have a HP officejet 4500 g510N wireless and feels to lose on the first inch of each document that scan scan. I ran printing HP and doctor Scan with the same result. Someone at - it other ideas on what I need to do to fix this?
-
How can I change how my computer wakes from sleep
I have a windows computer 8 and I want to know how to change how my computer wakes up from his sleep as a mouse movement, pressing keys or open the lid? Original title: windows 8