RTMPS connection delayed due to the direct connection attempt

Similar Questions

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• Get a connection error 421 4.4.2 dropped due to the socket error in exchange 2010

  We get an error while sending an e-mail to a particular connection 421 4.4.2 abandoned due to the socket error in exchange 2010

  Hi jussainkothari_412,

  Thanks for posting your question in the Microsoft answers Forum. Any questions on Exchange, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I'm opening a Windows Live Messenger email account different everytime I try to connect I get WE cant connect to messenger due to the error Code 80048821

  How to get past error Code 80048821 for a fool to count

  I'm opening a Windows Live Messenger email account different everytime I try to connect I get WE cant connect to messenger due to the error Code 80048821. I'm a fool to computer I have not a clue as to what the words mean. Or how to follow instructions for geeks or people who understand computers. Sorry but people there are still a lot of people in the world who do not understand the computer speech. Can you help me Mx Easom

  Hello MaxEasom,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Office jet Pro 6830: replacement 6830 don't no wireless connection during the implementation using the directions of ink instant

  I received a replacement 6830 due to the print head error. I installed the ink and followed the instructions to install the software. I got to the screen where it searced for my device make the wireless connection and it never "found" my printer. I am not able to connect. Information for install on mine was not clear. I tried to put in some information of the wireless display, and it did not match the format that was requested.

  Now I have a replacement Clipboard because when I try to print, it is not able to locate the printer through the wireless connection. When I go through my laptop to try to connect, I get this message: "Unable to connect with the device selected."

  I have connected the printer to my wireless router on thanks to the function of Assistant, so that is in the printer.

  Hello

  Sorry to hear that you are having problems with the replacement unit.

  Try to remove the printer (or all existing printers) and then add your printer by opening the Preferences tab and then selecting «printers & scanners»

  From there, click on the sign less under the printer icon to remove the printer and then add again using the sign.

  

  I've also included a link here to the guide of the user here that describes the steps of the Wi - Fi page 71 from.

• When I'm in split mode, I can't see my pictures.  I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2.  Is there a setting in DreamWeaver I can change to take account of my images to be self

  When I'm in split mode, I can't see my pictures.  I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2.  Is there a setting in DreamWeaver, I can change to take account of my images be seen?  Then I see mode live view but not in the edit view.  I use DreamWeaver CS5

  It's normal when you are in mode split with Code and design, while the external use referenced images. There is no setting to fix it.

  As a work around, I normally keep a copy local images in a file of site when working on an html email, then just before the code for the e-mail service hovers over, I'll do a quick search & replace to add the absolute paths for images server copies.

  Live View mode should show images correctly, but editing is not possible in DWCS6 although later versions now have an editor in Live mode.

• Detect direct P2P connection attempts

  Hello

  I wonder if it comes out a way to detect P2P connection attempts in a DIRECT_CONNECTIONS scenario. NetStream::onPeerConnect allows to accept (or reject) P2P direct connection, but it is triggered on successful login. But there is nothing to detect the beginning of attempts.

  I guess that the service make you send initiator information peer exchange for destinator, to reach the UDP process punching hole. She that we could detect homologous initiator id that is trying to connect (the side target peer), we could go back to server more easily!

  You confirm that it is not available, no event does allow it?

  Best regards

  Mathieu

  lol the appointment service does not send the ID of the peer of the initiator to the target.

  your application logic can inform the target connection is inbound via a communication channel out-of-band if write you it like this. for example, the "VideoPhoneLabs" example on the web page of Cirrus Labs uses 'Short message relay service' Cirrus to send a notice of appeal to the target.

  József, to another thread in this forum, has recently published a short code snippet that can be used with FMS to reproduce this function of relay.

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• What is the deadline for no connection attempts?

  Original title: access attempts.

  What is the deadline for no connection attempts? If my system is configured to block after 3 attempts, how much time must elapse before the meter is "reset"? For example, I am trying to login with an incorrect password twice, but I don't want to lock the machine. How long should I wait to try again? It is a system that is part of a network (2012 server and active directory).

  Thank you!

  It is easy to determine.

  Open a command prompt window

  Start-> all programs-> Accessories-> command prompt

  Then, enter the following command:

  net accounts

  In the output that follows, the 'locking threshold' is the number of missed passwords allowed before the lockout and the ' locking ' is the number of minutes that you will be locked, and the "Lockout observation window" is the time window in which there is lack of passwords.

  HTH,

  JW

• Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

  Hi all

  I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

  Can anyone help me please with this.

  Thank you

  Zia

  What is the local firewall on your computer?

• Connection attempts that have failed maximum AnyConnect on the LDAP Windows database

  Hello

  I can't seem to find the setting for the Web and client Anyconnect set connection attempts that have failed maximum when on the LDAP in Windows database.

  I would say that after that maximum 3 attempts to connect the possebility to connect again times out for 10 minutes.

  Now it is possible to log in as often as you want, which is a big security problem.

  Please, I can use some help to achieve this, thanks in advance.

  Best,

  Orson

  I don't think that this can be configured in AnyConnect or on the ASA. They both rely on the settings on the Windows Server. We can fix this. (reference)

• How to find the failed connection attempts at 'check' session is enabled

  How to find the unsuccessful connection attempt to dba_audit_trail when the "audit logon" is enabled.

  Filter your query against dba_audit_trail action_name = 'CONNECTION' with returncode! = 0 (returncode = 0 means that there are no errors - successful connection attempts)

• Unable to connect to the host server: a connection attempt failed because

  Hi all

  I install my host ESX server in vmware workstation.  It works fine except when I am creating virtual machines.

  I'm not able to install the operating system on the virtual machine and I get this error that appears inside the virtual machine.

  Unable to connect to the host server: a connection attempt failed because the connected party did not respond after a certain time, or established connection failed because connected host has no

  to answer.  Do you want to retry?

  My ESX server hosts have static IP addresses.

  I've seen a few similar posts on this issue, but their solutions have not worked for me.

  Best regards

  Nathan

  I think we confuse you.  ESX server is running like a machine virtual within the workstation, correct?  If Yes, then you must edit the vmx esx server with these entries monitor configuration file *.  They can go anywhere in the file.  Once those have been added, you should be able to run 32-bit virtual machines within the esx server.

  -KjB

  VMware vExpert