Why is the saved bitmap turned?

Similar Questions

• Why does the iTunes on my macbook pro light when my Apple TV turns on.

  Why does the iTunes on my macbook pro light when my Apple TV turns on.

  No idea, mine isn't and I'm reasonably sure he shouldn't, I wonder if I'm not wrong understand what you mean, please specify exactly what is happening.

• Why is the box to remember password is gray? It used to work now it won't save them.

  Why is the box to remember password is gray? It used to work now it won't save them.

  This could be because you have set Firefox not remember the history. Who did you intentionally? It is defined in the Options dialog box:

  "3-bar" menu button (or tools) > Options > privacy

  Maybe it would work if you choose "Use the custom settings for history" and not to turn off specific things that you want to disable.

  A little luck?

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Vista and Color Laserjet 5 M reprints all when the printer is turned on?

  Vist and Color Laserjet 5 M reprints all when the printer is turned on?

  It is a new one on me. I installed the printer with a barrette SIMM Postscript so it would work even at all under Vista and now it prints well but insists on the fact that I have all re - print he has never seen a reason any whenever I turn the printer to print something again.

  XP he has never done that, but I've always had the document cannot print the error that I ignored as he did print correctly.

  Google has not really revealed anything?

  ?? Type response level 1 I was looking for... These printers are a full restart, test of memory and when it is off.

  But I think I solved it, spent some time on google and there was a suggestion on the spooler in vista, was something like clear keep printed documents or print spooling first, I went also to start printing after the last page. Who took care of a lot of it somehow. Not sure why the generic installation program would need to be changed here. Possible I did for me somehow when I was trying to get the thing to work with the PCL driver too.

  Then I noticed that whenever I turned on the printer it is printing a page of demo postscript, for some reason any, it is enabled by default in the SIMM option. Turn power off and now its not wasting so much paper now.

  So two things to look for in the computer and the printer.

• Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Here is the document

  http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC438020

  See the Suggestion of Shekhar:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/missing-power-management-tabs/4dd34dfb-B0E9-4f62-8eb8-0b0689344281

  Political group to turn and set the option for the inside network card power management tab

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/50fdee7e-fdf7-4734-8079-3a3aa5556fdd

  Kelly XP Tweaks - on this page scroll down to #204.  On the right side you will see "power schemes/configurations of restoration.  Here are the scripts.  You should see a window with «do you want to run...» »

  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  A link that did not work... TEC438020 http://www.rm.com/Support/TechnicalArticle.asp?cref=TEC438020.

  If you delete the start TEC438020 letters... This would have worked.   Sorry but for some reason that my shortcuts duplicate urls notice the end of the above url shows the same letters that I told you to remove.  Do not forget that in case it happens again in the future.  (God forbid)

• How to convert the object Bitmap to byteArray.

  Hi all

  I had a problem in the conversion of the bitmap object to. BMP file.

  (Real need: capture the screen shot and convert that turned to the screen.) BMP image and I have to keep this image in the SCARD

  I shouldn't use any PNGEncodedImage or JPEGEncodedImage )

  I capture the screen shot using the

  Bitmap BM = new Bitmap (width, height);

  Display.screenshot (WB);

  to get the data from [] bytes of this bitmap object that I use

  Byte [] _bytes = getBytesFromBitmap (bitmap);

  public byte [] getBytesFromBitmap (Bitmap bmp) {}
  try {}
  int height = bmp.getHeight ();
  int width = bmp.getWidth ();
  int [] rgbdata = new int [width * height];
  ByteArrayOutputStream Bos = new ByteArrayOutputStream();
  DataOutputStream back = new DataOutputStream (bos);
  Graphics g = new Graphics (bmp);
  bmp.getARGB(rgbdata,0,width,0,0,width,height);
  for (int i = 0; i)< rgbdata.length="" ;="" i++)="">
  If (rgbdata [i]! = - 1) {}
  dos.writeInt (i);
  back. Flush();
  //l++;
  }
  }
  Bos.Flush ();
  Return bos.toByteArray ();
  }
  catch (Exception ex) {}
  Dialog.Alert ("getBytesFromBitmap:" + ex.toString ());
  Returns a null value.
  }

  If I use this byte array in the Sub statement I get the "IllegalArgumentException".

  BMPEncodedImage.createEncodedImage (_bytes, 0, _bytes .length);

  all can help me how I can get the byte [] data from the bitmap object?

  import java.io.ByteArrayOutputStream;import java.io.DataOutputStream;import java.io.IOException;
  
  import javax.microedition.lcdui.Image;
  
  /** * @author Samuel Halliday */public final class BMPGenerator {
  
      /**     * @param image     * @return     * @throws IOException     * @see {@link #encodeBMP(int[], int, int)}     */    public static byte[] encodeBMP(Image image) throws IOException {        int width = image.getWidth();        int height = image.getHeight();        int[] rgb = new int[height * width];        image.getRGB(rgb, 0, width, 0, 0, width, height);        return encodeBMP(rgb, width, height);    }
  
      /**     * A self-contained BMP generator, which takes a byte array (without any unusual     * offsets) extracted from an {@link Image}. The target platform is J2ME. You may     * wish to use the convenience method {@link #encodeBMP(Image)} instead of this.     * 
       * A BMP file consists of 4 parts:-     * 
       * 
  header
       * 
  information header
       * 
  optional palette
       * 
  image data
       * 
       * At this time only 24 bit uncompressed BMPs with Windows V3 headers can be created.     * Future releases may become much more space-efficient, but will most likely be     * ditched in favour of a PNG generator.     *      * @param rgb     * @param width     * @param height     * @return     * @throws IOException     * @see http://en.wikipedia.org/wiki/Windows_bitmap     */    public static byte[] encodeBMP(int[] rgb, int width, int height)            throws IOException {        int pad = (4 - (width % 4)) % 4;        // the size of the BMP file in bytes        int size = 14 + 40 + height * (pad + width * 3);        ByteArrayOutputStream bytes = new ByteArrayOutputStream(size);        DataOutputStream stream = new DataOutputStream(bytes);        // HEADER        // the magic number used to identify the BMP file: 0x42 0x4D        stream.writeByte(0x42);        stream.writeByte(0x4D);        stream.writeInt(swapEndian(size));        // reserved        stream.writeInt(0);        // the offset, i.e. starting address of the bitmap data        stream.writeInt(swapEndian(14 + 40));        // INFORMATION HEADER (Windows V3 header)        // the size of this header (40 bytes)        stream.writeInt(swapEndian(40));        // the bitmap width in pixels (signed integer).        stream.writeInt(swapEndian(width));        // the bitmap height in pixels (signed integer).        stream.writeInt(swapEndian(height));        // the number of colour planes being used. Must be set to 1.        stream.writeShort(swapEndian((short) 1));        // the number of bits per pixel, which is the colour depth of the image.        stream.writeShort(swapEndian((short) 24));        // the compression method being used.        stream.writeInt(0);        // image size. The size of the raw bitmap data. 0 is valid for uncompressed.        stream.writeInt(0);        // the horizontal resolution of the image. (pixel per meter, signed integer)        stream.writeInt(0);        // the vertical resolution of the image. (pixel per meter, signed integer)        stream.writeInt(0);        // the number of colours in the colour palette, or 0 to default to 2n.        stream.writeInt(0);        // the number of important colours used, or 0 when every colour is important;        // generally ignored.        stream.writeInt(0);        // PALETTE        // none for 24 bit depth        // IMAGE DATA        // starting in the bottom left, working right and then up        // a series of 3 bytes per pixel in the order B G R.        for (int j = height - 1; j >= 0; j--) {            for (int i = 0; i < width; i++) {                int val = rgb[i + width * j];                stream.writeByte(val & 0x000000FF);                stream.writeByte((val >>> 8 ) & 0x000000FF);                stream.writeByte((val >>> 16) & 0x000000FF);            }            // number of bytes in each row must be padded to multiple of 4            for (int i = 0; i < pad; i++) {                stream.writeByte(0);            }        }        byte[] out = bytes.toByteArray();        bytes.close();        // quick consistency check        if (out.length != size)            throw new RuntimeException("bad math");        return out;    }
  
      /**     * Swap the Endian-ness of a 32 bit integer.     *      * @param value     * @return     */    private static int swapEndian(int value) {        int b1 = value & 0xff;        int b2 = (value >> 8 ) & 0xff;        int b3 = (value >> 16) & 0xff;        int b4 = (value >> 24) & 0xff;
  
          return b1 << 24 | b2 << 16 | b3 << 8 | b4 << 0;    }
  
      /**     * Swap the Endian-ness of a 16 bit integer.     *      * @param value     * @return     */    private static short swapEndian(short value) {        int b1 = value & 0xff;        int b2 = (value >> 8 ) & 0xff;
  
          return (short) (b1 << 8 | b2 << 0);    }
  
  }
  
  Found form the Link mentioned below:
  
  http://javablog.co.uk/2007/12/26/j2me-bitmap-encoder/
  

• Why is the 'Documents and Settings' folder hidden and inaccessible?

  I used PC backup for backing up my XP files.  When I restore the files on my Windows 7 computer, I tried to bring it back to the "C:\Users\name\Desktop\test".  There is now a "Documents and Settings" folder hidden and inaccessible in my "C:\Users\name\Desktop\test".  How can I view/delete this folder?

  Short answer:  Because there isn't actually.  Please do not try to access it, you will help break your operating system if you try, and you will lose the ability to run several programs or worse.
  
  
  Why?  The tale:
  The Documents and Settings folder does not really exist in Windows 7.  This is only to fool the bad programs by redirecting to the right place (the Users folder).  Apparently he also deceived you.  It is not a real issue, do not try to access it.
  
  
  Or if you prefer, here's the long Version:
  First of all, the Documents and Settings folder came into existence in Windows 2000.  In order to shorten the path name (there is a limit to how many long letters we) as well as to create other languages of the operating system for use throughout the world, this folder has been renamed a few users in 2006 with the release of Windows Server and Windows Vista.
  Programs built the right way, that is not the real name or spelling (or language) of the book by fine user path, because they use the variable %UserProfile%.  However, many programs have been built the wrong way.  They are absolutely dependent on the existence of a folder called "Documents and Settings", spelled in English.  This program will crash if they do not find the file they want.  So to keep these plant program, Microsoft has created a record of false (called a junction Point) that redirects these programs on the folder of the user.  So if a program think he saved a file in c:\documents and settings\joe\desktop- the file will actually be saved to c:\users\joe\desktop.  The program never knows that he cheated.
  What you need to do:  Go to your Folder Options, tell him to Hide protected operating system files, and then use your computer normally.

• Why are the rotation buttons upside autour

  Why are the rotation of the knobs the wrong way autour.

  It allows to be that we could move the buttons of the icon freely, but now we are forced to put them as chosen by Adobe.

  The problem is that Adobe is American and we know all that the Americans do things the wrong way autour. :-)

  So why does make sense to them than the Rotate counterclockwise button is on the right and the right-hand rotation button is left?

  If you want to rotate a PDF anti-clockwise, then you choose the button anti-clockwise. It is a movement of the LEFT then why is the button counterclockwise on the right?

  Hello

  Thanks for your suggestion. If you use Acrobat DC we have options page under the tool rotation organize Pages (with the same icons) where changes can be saved, while, to discover rotation only tools that cannot be saved are opposite. It's just to make the difference between the two sets.

  Thank you

  Abhishek

• Question ESXi 5.5 with turn a virtual computer: "an error was received from the ESX host turning on VM" '22 (Invalid argument)"'DiskEarly on a power Module failed.'

  Here's what happens when you try to turn it on one of my virtual machines (see also accessories):

  Error stack:

  An error was received from the ESX host turning on VM vzilla-ws2012r2e.

  Unable to start the virtual machine.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_3.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  Power DiskEarly module has failed.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_4.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  This circumstance may be linked to a sata cable issue, with the possibility of temporary loss of connectivity, which could result in data loss/corruption, I realize.  It is a laboratory box.  Especially say that the 2 VMDK he complains (trying to light) is both on the grounds of a single physical disk. Data, read and written to the speaker, since the problem are very good (which indicates the wiring problem was resolved, and the VMFS5 file system seems to be in good health).

  No photos.  No related clones.  Just a 2012 Windows Server based VM, with several drive letters in, with those underlying files VMDK residing on different stores of data VMFS5.  Implemented end (these drives aren't really so huge), but far from running out of physical space for the data either. Everything is working great for months, until today, trying to it turns on again.

  You are looking for:

  "Failure error disk beginning module lit" results in this article:

  error disk on start module failed

  which indicates the .lck files may be present.  It does not exist.

  Then upwards, of a variety of other items:

  Re: Unable to start the virtual machine: invalid argument on *-flat.vmdk

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004232

  https://communities.VMware.com/message/search.jspa?peopleEnabled=true & userid = & ContainerType = & Container = & q = module + DiskEar...

  error disk on start module failed

  but alas, none of them seem to relate directly, or exactly.  My vmware.log file is attached below, as well as some screenshots of to show the structure of the unity of this virtual machine.  Hoping that this post proves fruitful, if anyone has had a similar situation.  The data at stake here are (mostly) redundant, but I would rather understand my way of it, in the case where it happens to me again, or can help others.  Many preferred rather than give up, reformat the VMFS and start again.

  Thank you!

  Good news, the best result I could hope. No data is lost. No corruption of the VMFS or NTFS don't drive in the virtual machine. Nice!  Saved me a few terabytes of data restoration and learned a little more on file system of troubleshooting along the way.

  It took a technician of VMware Service excellent, attentive, methodical remote 2 hours in a WebEx previously to resolve problems with these 2 files vmdk manually, because he found that there is a lock on them. I opened a request of Service (SR) # with VMware by following the instructions here:

  VMware KB: Cannot access certain files on a VMFS datastore

  To resolve this problem, apply for support from VMware Support and note this ID (1012036) Knowledge Base article in the description of the problem. For more information on the filing of a request for support, see How to submit a support request.

  I'll cover this saga and the exact process for collecting and downloading of newspapers, through to my TinkerTry.com, including the ride video.  I even captured much of the technical work that has been done. That said, it is true that little of the magic that was made to resurrect the metadata will remain a mystery, given that this piece is VMware.

  I'm ok with a bit of black box, considering how I'm happy that I got all my data, and time savings that the quick recovery represented.

  By clicking on the button "answer".

• IM new to Actionscript 3... When I click on the green circle turns red and I want to stay like that?

  IM new to Actionscript 3... When I click on the green circle turns red and I want to keep it like that, but it wont save. I don't know, but the saved color custom help someone?... but her hot flashes.

  the name of the instance to the video clip is green

  
  

  Here is the source code

  var myS:SharedObject = SharedObject.getLocal ("sdsds");

  var my_color:ColorTransform = new ColorTransform();

  my_color. Color = 0xFF0000;

  Green.Object = myS.data.me;

  green.addEventListener(MouseEvent.CLICK... myClick);

  function myClick (e:MouseEvent): void {}

  trace ("I've been clicked!");

  green.transform.colorTransform = color;

  trace (MYS. Flush());

  }

  trace (myS.data.me);

  use:

  var myS:SharedObject = SharedObject.getLocal("sdsds",'/');

  var my_color:ColorTransform = new ColorTransform();

  my_color. Color = 0xFF0000;

  If {(myS.data.my_color)}

  green.transform.colorTransform = my_color;

  }

  green.addEventListener (MouseEvent.CLICK, myClick);

  function myClick (e:MouseEvent): void {}

  green.transform.colorTransform = color;

  myS.data.my_color = true;

  }

• Handful of sequence data contains incorrect values when loading the saved project

  Hi people!

  
  

  I ran into a problem where my values of sequence data are not correct when you open a project with an instance of my effect plugin.

  The values look good if I manually inspect when they are flattened and written in a fine when handle memory and restore AE sends PF_Cmd_SEQUENCE_RESETUP once the backup is complete.  But when I open / load the saved project, the values are not correct.  In other words, my logic flattening/unflattening works within the same session, but during the loading of a saved project, the flattened data is incomplete or has bad values.

  I write several objects to the handful of flat sequence data, and I was wondering if this could be the cause.

  The flattened sequence data manage memory looks like this:

  [[type struct A] [type struct b] [b] of type struct] [struct type b] <.. .arbitrary number of struct type BS... >]

  NB of struct type B varies, so when I ask AE for a handle of memory, I have this:

  size_t flatSequenceDataSize = sizeof(structTypeA) + (sizeof(structTypeB)* numberOfBStructsNeeded);
  PF_Handle flat_seq_dataH = suites.HandleSuite1()->host_new_handle(flatSequenceDataSize);
  
  
  

  Then, to write the data to the handle:

  structTypeA myDataA = <... populate struct values ...>
  std::vector<structTypeB> allStructB_V;
  <... populate vector ...>
  
  void *flat_seq_dataP = suites.HandleSuite1()->host_lock_handle(flat_seq_dataH);
  
  structTypeA *structA_P = reinterpret_cast<structTypeA*>(flat_seq_dataP);
  memcpy(flat_seq_dataP, &myDataA, sizeof(structTypeA));
  
  structTypeB *structB_P = reinterpret_cast<structTypeB*>(flat_seq_dataP);
  
  //offset pointer by the size of the first struct in the handle
  structB_P += sizeof(structTypeA);
  
  for (A_long vectorIndex=0; vectorIndex < allStructB_V.size(); vectorIndex++) {
      *structB_P = allStructB_V.at(vectorIndex);
      structB_P+= sizeof(structTypeB);
  }
  
  out_data->sequence_data = flat_seq_dataH;
  suites.HandleSuite1()->host_unlock_handle(flat_seq_dataH);
  
  
  

  When I access the handful of sequence data loading stage, the first struct in the flattened handle has correct values, but all following structs have false values.  I check if the handle is always the right size (I save the size of the handle inside the first structure) and it is indeed the correct size.  I wonder if AE doesn't like how I write from the structB to the handle.

  I'm doing something wrong here?  Is there a better way to store data of arbitrary sizes?

  Thanks for your help!

  -Andy

  Ah, I missed actually a significant error in your pointer arithmetic! You're actually in the land of UB ("undefined behavior") with your code!

  You add byte offsets to a pointer type, which is doomed to failure if you don't know what you're doing.

  If you have

  structTypeB * structB_P = reinterpret_cast(flat_seq_dataP);

  and do you

  structB_P += sizeof (structTypeA);

  most of compiler that turn into something like this:

  structB_P = (structTypeB *) ((unsigned char*) + sizeof (structTypeA) * sizeof (structTypeB));

  Wrong in your case (in most cases actually).

  Or more simple put:

  If you have a pointer

  structTypeB * structB_P =...

  and you do:

  structB_P += 3;

  It actually means

  structB_P = strucB_P + 3 * sizeof (structTypeB);

  already!

  Try running your pointer to an unsigned char * or another type of 1 byte basis and then make the increment, and then recast.

  Here's a site with more information on this:

  http://StackOverflow.com/questions/15934111/portable-and-safe-way-to-add-byte-offset-to-an y-pointer

  It could then look like this (on the top of my head, did not check!):

  void * flat_seq_dataP = suites. HandleSuite1()-> host_lock_handle (flat_seq_dataH);

  structTypeA * structA_P = reinterpret_cast(flat_seq_dataP);

  memcpy (myDataA, sizeof (structTypeA) & flat_seq_dataP);

  structTypeB * structB_P = reinterpret_cast(reinterpret_cast(flat_seq_dataP) + sizeof (structTypeA));

  memcpy (structB_P, allStructB_V.data (), sizeof (structTypeB) * allStructB_V.size ());

  out_data-> sequence_data = flat_seq_dataH;

  Suites. HandleSuite1()-> host_unlock_handle (flat_seq_dataH);

• How to get a GIF to loop PE11 with MAC 10.6.8? 480 x 320 x 72 pix/in. layers saved for the web, see animate, listen to excerpts times very well but the saved file is not

  can't understand why the gif file loop. Implemented 480x320pixels of photo frames 5 x 72pix / in in PE11, creating a layer for each. Each visible layer. Registered for the web. Checked to animate. The preview plays very well. But when I save the file and then click on the saved file to play, he re - opens the layers instead of playing the loop. The only registration option that appears is "IMAGES ONLY".

  Using photoshop elements on MAC 10.6.8 11. Either I'll put this in wrong place or is there a hidden setting I need to change?

  It you open in a web browser? That's where he plays, not in PSE, overview, or on your desktop.

• Why must the clone clone snapshot at the beginning

  Hello

  I'm now thinking about the function of the cloning of vmware vCenter.

  Could someone give me an intelligent answer to my question.

  Why must the clone clone snapshot at the beginning.

  When you create a clone of vCenter, the first vCenter create a snapshot of the virtual machine.

  Why does?

  I think that having an information memory of the virtual machine to clone the machine.

  Based on the clone, he needs a shapshot.

  Is this right? If she only has not please tell me why the clone must snapshot?

  Thanks for reading.

  You cannot clone a VM running without a snapshot, because you have changes on the disks all the time during the clone process. A snapshot freezes your main drive, which allows you to clone the drive as if it was turned off.

  Concerning

• the request to turn off this virtual machine failed because the corresponding vmware tools script didn't run successfully

  using vmware fusion 2.0.5

  the request to turn off this virtual machine failed because the corresponding vmware tools script didn't run successfully

  now vmware cant off power

  is vmware tools script to run when windows is running

  If I power off (mac - force quit) now... what happens

  VMware Fusion 2.x...

  VMware Fusion (menu bar) > help > VMware Fusion help > running VMware Fusion and Virtual Machines > Shutting Down a virtual machine operating system

  VMware Fusion (menu bar) > help > VMware Fusion help > running VMware Fusion and Virtual Machines > Options for VMware Fusion food orders

  VMware Fusion (menu bar) > help > VMware Fusion help > running VMware Fusion and Virtual Machines > orders of switching power supply from the default Options

  ==========

  Note: It's like pulling the plug of the wall on a physical computer. Whatever this is not saved will be lost and there is always the possibility of corrupting the file system where preforming a hard stop! (Even if you have no choice but to do.)

  VMware Fusion menu bar > VM > press the option key and select Power Off

  By pressing the keys alt/option "Shutdown called" changes to "Power Off".

  Note: It also changes orders of "Suspend comments" and "Restart Guest' too.

  Or if this does not work then...

  On the library Virtual Machine ctrl - click on the target of the Virtual Machine and select Show in Finder and delete the .vmss file, the ctrl + click the target package of Virtual Machine, and then after the merger closed. Note: All that was not justified for the suspended state will be lost by deleting the .vmss file. Note: However: you have no other choice if the Virtual Machine does not suspend/resume/stop/start correctly.