Why jump lists do not work on Windows Explorer

Similar Questions

• Why CRYSTAL_REPORT program does not work with windows Vista? __

  Why CRYSTAL_REPORT program does not work with windows Vista?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Edge scrolling does not work in Windows Explorer

  My laptop has an Elan Smart Pad (version 5.2) and running Windows 7. Edge scrolling works on all applications except Windows Explorer. How can I make it work on Windows Explorer?

  I have contacted them, but has received no response...

  But I found a list of all the drivers of the Elan Smart Pad on internet, tested a few of them and found one that works very well!

  So problem solved!

• Why my sound does not work on Windows 7? I corrected, he had once but no idea how!

  So, my computer does not work.

  Specifically, it does not on any browser. Notifications from the computer work, but whenever I search something that his online, he will work the first time and ANY time after that not work then. Yesterday a friend and I were going through to try to challenge it... and we did it! He worked all day! Woke up this morning, am on Facebook and NOT of HIS. -_ - (Are you KIDDING ME?) I tried to update the driver, but he said that it was the best he could get, basically.

  I don't know what the problem is! Help! (Please)

  Most often when a device does not work, it is because the driver is damaged. Should help to re - install a new copy.  You must install the latest driver EVEN IF WINDOWS SAYS YOU HAVE THE BEST as drivers become corrupt.  Uninstall the current driver and without rebooting, install a new one.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Installation of Windows service does not work after Windows Explorer 9 uninstalling and reinstall Explorer 8

  Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8.  I followed several suggestions on this forum, but still no luck.  I ran the SFC system twice, who told me he had corrupted files.  "Some have been repaired and some might not be."  I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found.  Also the "hpqddsvc' and the 'gupdate' is not found.  He tries to install something every time I start, but he abandoned.  I checked whether the system is on and disabled.  It's on.  There are a lot of small problems, but my main concern is the Adobe program.  I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?

  Hello

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Why some games does not work in windows 8

  When I try to play some games with my computer windows 8 will not be open or open, they do not display correctly, I try solving compatibility problems but the games will not always open or they still don't display properly what should I do because I really want to play these games and I don't want to downgrade to do this.

  Hello

  Thanks for choosing Windows 8 and welcome to the Community Forums of Microsoft.

  According to the description provided, you can't play some games on your computer Windows 8.

  1. do you receive an error message when you try to play the games?

  2. you are trying to play games online?

  3 is the issue limited with a particular game?

  4. What is the brand and model of the computer?

  5. did you of recent changes to the computer?

  I suggest you check out the link below to check the compatibility of games with Windows 8.

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home

  Method 1: Try to update the graphics card drivers and check if it works.

  Follow the steps to update the graphics driver:

  a. press the Windows key + X , and then click Device Manager.

  b. search for graphics cards.

  c. right-click on the graphics card and click Update driver software.

  Method 2: Install the game in Compatibility Mode.

  Follow the link below to install the game in Compatibility Mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please get back to us with the necessary information if the problem persists.

  If you have problems of Windows in the future, let us know and we would be happy to help you.

• Why the sound does not work in Windows 10 with BootCamp installed on MacBook Pro mid 2012

  So, I recently had a mistake huge hard drive, then I formatted the drive and installed Windows 10 I downloaded the BootCamp 5.1.5621 software (which is the version for this computer) and my audio didn't work. I've used Windows 8.1 in the past without Activation, but that was a few months ago. I've deleted it 2 days after I put it on the computer, but all drivers well worked out there. Although I plug in a USB headset and audio installed and worked fine! Help, please! I even reinstalled BootCamp!

  I have the same Macbook Pro 2012 with boot camp and dual boot Windows-10 and Sierra.

  Everything works fine. I think you have the wrong boot camp files.

  I think that you need version 6. Reconnect to OS X and run the boot camp assistant and try to download new files from boot camp.

• Why double tapping does not work on windows message pad 10 insatallation.

  I'm having a problem with trackpad after installation of windows through boot camp 10. Double tapping no longer instead of double click I want to use the left/right click to open a folder or a link.

  can someone help me?

  It works correctly on the side of OS X? Are BC drivers installed? What year/model is your Mac?

• Why Illustrator 10 does not work in Windows 7?

  I thought that Windows 7 will run all the programs that run under Windows XP, but I'm having a problem with Illustrator 10. I installed Illustrator 10 on Windows 7 and when I run it, the logo appears in the center of the screen as it should, but the program stops suddenly lance before the window of the Illustrator. I have correctly installed and turn 7 Photoshop and InDesign 2, I bought at the same time as Illustrator 10, about 10 years ago. But I'm having a problem with Illustrator 10. No idea how to get Illustrator 10 to work?

  Philip,

  You use virtual XP mode?

  http://www.Microsoft.com/Windows/Virtual-PC/

  If this isn't the case, I think you should.

• Why my attachments function does not work in Windows Live Hotmail?

  Original title: why my attachments do not work?

  I have problems with getting documents to include as an attachment.  Never had this problem with hotmail before.   What I am doing wrong?  How can I find someone to HELP me?

  Hi BrendaRuschenberg,

  1. what browser do you use?

  2. don't you make changes on your computer before this problem?

  3 are you facing this problem only with Windows Live Hotmail?

  If you use Internet Explorer, you can follow the steps in this link & check if the problem persists.

  Cannot download file - join my Hotmail email

  Hope the helps of information.
  Please post back and we do know.

• my photoshop 5.5 does not work in Windows 10? Why?

  My old Photoshop 5.5 does not work in Windows 10, can I do to make it work?

  Are you talking about 5.5 PS reported 16 years ago? I think I heard someone say that they got that work, it is that such an old program that it is not intended to be run on modern OSS. It is a 32-bit program, and I think that you must have your hard drive partitioned off less than 1 TB, or it will not be installed. There is also the review of folder names. The default is to load the programs (at least in Win) in the folder c:\program files, which is intended for 64-bit programs. PS 5.5 must be loaded in the (x 86) folders, but its installer has no idea about it.

• Director 11.5 projectors do not work in Windows 98 - why?

  The info product for director 11/5 said it supports windows, but the projectors '.exe' do not work in windows 98.  I get a box full of question marks when I try.  The projector will even run in windows XP.  Older windows platforms are not supported?

  The Readme for Director 11.5 clearly indicates (Adobe Director 11.5 Read Me.pdf):

  Director Player and Shockwave Player
  Windows

  • Intel Pentium IV 600 MHz or higher
  • Microsoft® Windows® XP Service Pack 2 or later
  • Microsoft Windows Vista
  • ...

  There is no suggestion that Win98 is supported, and I don't know where you got the impression as is. It can work if you try to run your projector in compatibility mode (right click on the executable, select Properties-> compatibility)

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• Why this scriipt does not work with Firefox? < embed src = "News2008Fall.pdf" width = '615' height = '3200' > < / embed > "

  Please tell me why this script does not work with Firefox. It works with Safari. Here is the page that includes the script: www.lionsgatehoa.org/newslettertest.html. Thank you. Tom Engleman

  Here's the script in my html document:

  < embed src = "News2008Fall.pdf" width = '615' height = '3200' > < / embed > "

  Edit: removed # phone

  Works for me on Linux.
  
  Your system details list does not display the Adobe Reader plugin, so you'll have to (re) install this program.

  See:

  • https://support.Mozilla.org/KB/using+the+Adobe+Reader+plugin+with+Firefox
  • http://KB.mozillazine.org/Adobe_Reader
  • http://get.Adobe.com/reader/otherversions/