Why Lightroom auto-start on the computer in the market even if it is not in my Start menu (Windows7)?  Irritating!

Similar Questions

• Can Lightroom auto import of the subfolders in a folder of control?

  I have a job "watched folder", implemented through Lightroom's auto import settings.  When I place an image in this folder, it is imported in my lightroom catalog.

  However, if I put a folder of images in this folder of control (i.e. "James and Stephanie" is put in a 'marriage' case), nothing happens.  I don't want all my images in one folder; That's why I have Lightroom, so they can be organized into folders but collected in a database.

  I do not understand why Lightroom wants to go automatic image import to a destination folder.

  I would like to file a case in the 'watched' folder and have Lightroom Import (without moving the image) in my catalog.

  I was surprised not to find this question in Internet research; It is terribly obvious, or is there a better way that I'm not familiar with?

  Thank you!

  The control record is largely for simple images to be embedded in an external application of attachment, import and travel in a designated folder catalogued.  LR is not a way to visualize a folder tree.  You can use sync the folder for it.

• Why my computer is running slowly even when I do not have a virus?

  I find the virus and there is none. but my computer is very slow

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why can't I access the shortcuts on get desktop application not found?

  shortcuts even I used to be able to open?

  Hello

  Were there any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the Microsoft Fixit for the link.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2:

  Try running the programs in the start menu.

  a. Click Start.

  b. click on all programs.

  c. try to launch programs.

• When I run Adobe Lightroom 6, I get the error: AgTransitCargo_pushTransitCargo - wichitafoundation.dll does not start.

  

  I reinstalled Lightroom with the CD. Problem stays.

  Hi paulp,.

  Greetings.

  It seems that Lightroom makes a call to the AGkernel.dll file, this can occur when AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  • Re register AGKernel.dll with Windows: https://support.microsoft.com/en-us/kb/249873
  • Install all the updates that are available for Windows: Windows Installer updates
  • Uninstall and reinstall Lightroom to Photoshop Lightroom Installer (no CD)

  Let us klnow if that helps.

  Concerning

  Assani

• Lightroom auto-start

  How can I keep Lightroom opens automatically when I put in a flash drive, external hard drive? I have many occasions where I have this but need not use Lightroom but it automatically opens with a choose "import". Thank you.

  Edit > Preferences > General

  

• Why my video work in the preview WMM, but don't not after publication?

  The video plays smoothly in the preview, but when I publish it the video stops at a section in half way through and freezes and goes on like this for the rest of the duration of the video.

  I tried to publish different ways and re-issue of my video, but it continues to be...

  Hello

  This can happen if you try to publish a movie after one or several source files for the corresponding clips in your project have been moved, renamed, or deleted.

  To resolve this problem, do one or more of the following:

  a. Locate the original source file, and move or copy them into the directory on your computer when it was first imported into Windows Movie Maker. To find a missing file, click on the missing element in the collection or project pane, click on edit and then click on search for a missing file.

  b. check that all network locations are still available if the source file was originally located on a shared network location when it was first imported into Windows Movie Maker.

  Check this link for more information:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

• Lightroom cc "to remove the Chromatic Aberration" checkbox State is not saved with preset to develop

  I am trying to save a preset development to apply to importation.

  I check both 'Activate profile Corrections' and 'remove the Chromatic Aberration' and save it under a new preset development.

  After you import files with this preset the "Activate the Corrections in profile" is checked but the the "Remove the Chromatic Aberration" is nothing of done.

  Anyone else having this problem or knows what I'm doing wrong?

  Thank you

  Nathan

  ngUTTRIDGE wrote:

  I am trying to save a preset development to apply to importation.

  I check the "profile Corrections allow' and 'remove the Chromatic Aberration' and save it as a new preset development.

  After importing the files with this preset "Activate profile Corrections" is checked but him 'remove the Chromatic Aberration"is nothing is done.

  This is a known bug in Lightroom 6.2/6.2.1 and Lightroon CC 2015.2 and 2015.2.1. You can go to Photoshop family customer community and find the thread where this issue is discussed and add your name/vote to fix this bug.

• 5.4 Lightroom can't access the page import: "internal error - could not find namespace: AgCreativeCloudUtils".

  I just installed Lightroom 5.4 (I use OS 10.10.2), and now I can't access the import page.

  The error message says: internal error - namespace was not found: AgCreativeCloudUtils

  Does anyone know how to fix this?

  Thank you.

  I thought about it. I used 5.4 but installed 5.7.1 so a simple reboot fixed it.

• Why I don't get the ads even if I blocked the ups 'Bop' in Firefox 36.0 worm?

  I ticked the box "block bop" simple in the 36.0 Version of Firefox, but still get all the ads and I don't have no control to turn them off. But it was not the case in the previous version of Firefox 34.0. Can someone help me on this. Thank you.

  VS38

  Adblock more {web link}
  Blocks annoying video ads on YouTube, Facebook ads, banners
  and much more. Adblock Plus blocks all the annoying ads, and
  supports Web sites by blocking is not discrete (configurable) default ads.

• Why in my section of the floating section layout everything does not have Abobe elements 12?

     

  I have 12 Adobe elements, and I have a problem in the layout at the bottom of the screen section.

  In the page layout section, I can use all masks except all floating.

  When I used 12 elements it worked but suddenly it stop working.

  What can I do to solve this problem.

  Albert F Schwartz Jr

  E-mail [email protected]

  The editor preferences > General > switch allows floating documents in expert mode.

• Windows 7 keeps waking up peripheral NAS on the network even when SIN is not accessed

  I have a NAS device on my home network.  This NAS is set to Hibernate periodically when not in service.  I just replaced my old PC with a PC Windows 7 Professional 64-bit.  Since then, I found that the SIN wake up whenever I start my PC and also re - wake up EVERY 20 minutes until my Windows 7 PC is on and not sleeping.

  My old PC ran on Windows Vista 64 - bit professional.  I don't have this problem when using this PC.  I confirmed that this problem is not my router network or other devices.  I have even shut down my PC Windows 7 and connected my old Vista PC to the network and did not have this problem.

  So I'm fairly certain that it is ongoing because of something in the mode of working Windows 7 network.  It seems that there is some kind of network 'ping' being sent by Windows 7 on a regular basis which is wake up NAS.  Does anyone know all the network settings in Windows 7 which could be the cause?

  Thank you.

  SolarWinds has a free product that you can install on your PC to monitor the traffic (band monitor real time bandwidth) network. You might be able to use this to understand what generates more upward.

  http://www.SolarWinds.com/products/solarwinds_free_tools/

  I hope this helps.

• Input array allocated by the function even if it is not

  I set it up to call the foalT table 4 times to combine with different results.  foalT is a multidimensional array with each element of the element 4 long.   It works perfectly the first time that the function is called foalTotal is correct.  Other times foalT is empty.  It seems that the problem happens when I use original.shift () and then call them recursively function but I have no idea why original happens in the foalT table.  Any help would be appreciated.

  var foalTotal:Array = handset (foalWA, foalT);

  var foalTSC:Array = Combine(foalWASC,foalT);

  var foalTDC:Array = Combine(foalWADC,foalT);

  var foalTBC:Array = Combine(foalWABC,foalT);

  Function Combine(cross:Array,original:Array):Array {}

  var k: uint = 0;

  total var: Array = new Array;

  trace ("foalT length:" + original.length);

  If {(original.length!==0)}

  for (var i: uint = 0; i < cross.length; i ++) {}

  for (var j: uint = 0; j < = 3; j ++) {}

  total [k] = cross [i] .slice ();

  total [k].push(original[0][j]);

                      k++;

  } //end for

  } //end external to

  original.shift ();

  (Combined (total, original)); return

  } //end if

       else

  return (cross);

  { } / / end fuction

  Flex has some degree of use of the references who know you in this case.

  As noted in the previous poster, you must clone the object in this case.

• I sent a song to someone in a different country and it won't let me change the recipient, even if she has not been redeemed yet.

  I sent a song to one of my friends who live in Canada, while I'm in the United States and I didn't know that it wasn't going to work. She was not able to buy since she lives outside the United States, but it won't let me change the recipient. Is it possible that I can change the recipient or even recover my $1.29? Thank you.

  That's what you have tried to send it back: return gifts iTunes - Apple Support ?

  If this does not work you can try to contact iTunes Support and see if they will refund you: http://reportaproblem.apple.com or https://www.apple.com/emea/support/itunes/contact.html

• New application guard auto starting annoying

  I am new user of Win 7 & I have loaded down the new sat nav App why it auto start whenever I start its very annoying as I close again

  Unless they are trying deliberately to annoy they put an option in its parameters to toggle start with Windows.

  You can also watch here for applications that run at startup [but there are other ways to achieve this startup that are not so easy to find]:

  C:\ProgramData\Microsoft\Windows\Start menu 1

  2 C:\Users\yourusername\AppData\Roaming\Microsoft\Windows\Start Menu

  3 the application can use an entry in MSConfig, but disabling that would almost certainly it inhibits when you decided to start - you re - activate the entry in MSConfig and restart if you want to use the application.  To have a peek without necessarily changing anything, type msconfig in the search box on the start menu, right-click on the shortcut that is offered & select run as administrator.  Then take a look at the Start to see the applications tab & supporting utilities that run when you start.  Click Cancel when you are finished looking - incorrectly change MSConfig settings may disable your entire PC.