Why my administrator cannot access me to uninstall hotspot protect?
When I uninstall hotspot shield error comes that your system administrator has no access?
Hello
Try this free Revo program to remove it.
http://www.revouninstaller.com/revo_uninstaller_free_download.html
And also scan for Malware.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
Tags: Windows
Similar Questions
-
Administrator cannot access the different (seemingly random) files
Windows XP on my desktop computer connected to the home network and regularly synchronized with Windows 7 Home Premium on my laptop
Problem #1
I'm trying to access the files I often consulted on both computers before and now I'm getting "access is denied; need administrator rights. "I am and have always been the only user of both computers. More confusing still, some of these files does not open, certain opening but cannot be moved; some open but cannot be changed; some can be deleted but not restored (don't even ask), etc. but I can not find a model as to who filed what will do. The same files work the same way on each computer.
Problem #2
How can you sift through and short-list possible solutions?
I have searched for hours on other sites and found "solutions" posted between 2009 and today 5 hours ago. I tried most of those I found except those included editing the registry (I'm chicken), which I justified by noting that they rarely worked for someone else than the poster of this solution.
I have fostered new answers and responses with a large number of positive votes, but I see "solutions" that others say will cause his computer more harm than good even if they worked for some readers, or too technical for me to understand, solutions or solutions that work under a subset of the conditions that I've never heard before...
Is there a site that usually has the best answers? Or a person who usually gives the best answers? Or...?
Hello
This problem could be caused due to permissions problems, or even corrupt corrupted user accounts. These problems often occurs when you are connected to other computers on a network or even simply plug an external hard drive to your computer.
I suggest you follow the steps in the link below and the update on the status of the issue.
The issue could be fixed if take us in hand the folder and give all permissions to access.
"Access denied" or other errors in the access to or work with files and folders in Windows:
http://support.Microsoft.com/kb/2623670#method4
For reference:
How to open a file if I get an access denied message? :
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message
Appropriating a file or a folder:
http://TechNet.Microsoft.com/en-us/library/cc753659.aspx
I hope this helps.
-
the administrator cannot access programs, but guest user can
When I am logged in as an admin user can't access programs, it happens that the program does not exist. When I try to go on internet with Explorer he asks me what program I want to use to access the internet. If I change my user and just go as a guest he let me go on the internet with no problems and have access to all the programs on the desktop. also, when I am logged on as administrator a lot icons in the toolbar have disappeared. It's as if the admin is blocked for doing things, but a guest user can.
Thank youHello
The computer seems to work fine in safe mode. The diagnostic mode disables all third party software and services that run in the background. To emulate a similar situation in normal mode, you can run clean boot.
To perform a clean boot on a computer that is running Windows Vista, follow these steps.
1. click on start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after starting the computer, reinstall and run the program and see if the problem is resolved.
Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
http://support.Microsoft.com/kb/331796
To restore your computer to a Normal startup mode, follow these steps.
1. click on start in the box start the search.
2. type msconfig and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
3. click on the general tab.
4. click on Normal Startup - load all device drivers and services and then click OK.
5. When you are prompted, click on restart to restart the computer.
Concerning
Anthony. -
Administrator cannot access folders in Windows 7
I have a new computer and I am the administrator. I've implemented a new guest account and he was denied access to a folder. However, the administrator can no longer access this folder at all.
Even when the administrator account can access the folder no files can be read (they are multimedia files).
Is it possible to completely reset the permissions on the folder that the administrator can play once more files.
Denying access to certain users or groups is a bad idea because it can have unintended effects if you are not perfectly familiar with how work ACL. A few days ago that I am involved in a thread that the author did the same thing you did. So far, none of us found a way to restore access to the file in which he asked to "deny".
If your neighbor wants to keep you out of his house, did it install a detection device of the person who is sensitive to you? Not very likely. It does the opposite: hands He carries keys to the people he trusts. You must manage the permissions on the folders in the same way: provides access only to the groups and users who you trust. Forget the others - because they are not in the trusted group they will get any access.
You can try this method to repair the damage you have done:
1 activate the administrator account and password.
2 restart in Safe Mode.
3. log on as an administrator.
4. click on start
5. type the three letters cmd
6. press on Ctrl + Shift + Enter
7 run the process as an administrator.
8 type the following commands and press ENTER after each:
takeown /f Q:\/a r d y
ICACLS Q:\/t/c/grant administrators: F System: F "%nom user %": F
(Answer "Yes" when prompted "Are you sure?")
(Replace q: with the actual drive letter the problem disk) -
USB is disabled. Administrator cannot access USB
Hello
I need help to enable the USB on the Windows 7 machine to my company. I have an administrator access on this computer.
Earlier, whenever I plug in the USB, it shows nothing. But I changed the value of register of HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\USBTOR-> start of 3
Now, I am able to see the USB, but every time I click to open it. It says E:\ Is not accessible by car. Access is denied.
I tried to change the owner of the car through properties-> advanced-> Secuirty
But it gives the same error again.
I tried a lot of solutions available on the internet and none of them works.
Thanks in advance for the help
~ Vikas
Hi Vikas,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
-
the administrator cannot connect to the internet, but other users?
the administrator cannot access internet, but other users on the same computor? all ideas
Hi David,
· What happens when the administrator tries to access the internet?
· You receive an error?
· Since when are you facing this problem?
Respond with more information so we can help you best.
-
Cannot access Windows Gadgets because the message only the administrator is permitted.
Original title:
I am logged on as administrator (only 1 person on this computer) but I get messages that only an administrator can access some files (for example the Windows Gadgets))
I have Windows 7 Ultimate, only one person has this computer (me), I installed as admin (no other account on this computer). Cannot access Windows Gadgets because the message only the administrator is permitted. I AM THE ADMINISTRATOR! Why is this happening?
Hello
1. you only receive the error message when you try to access the "Windows Gadgets"? What is the full error received?
2 have you made any changes to the computer before the show?
Method 1:
Step 1:
Check if you are able to access to the files and programs into account administrator in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Restart the computer to return to normal mode
Step 2:
If you are able to access all files and programs to the account administrator in safe mode then I suggest that you create a new user to the administrator.
Create a user account
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
Method 2: Try the steps from the following link and check:
How to open a file if I get an access denied message?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message
-
I don't understand why I can't login my account using mozilla but with googlechrome fb, I am able to do... Mozilla can load the fb site but cannot access my fb account... I'm uncomfortable with the use of mozilla as my browser... pls help thanks
- "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
- 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).
- Makes no changes on the start safe mode window.
See:
-
Group administrator cannot open Control Panel, Manager of tasks or access networked readers
Hello
I have a little trouble getting one of our computers in the domain to cooperate. We've added a bunch of user profiles of domain on this computer, all under the administrator group, but nobody except the local administrator can access network drives, open Control Panel and open the Task Manager. Even our domain administrator cannot do the previously listed. We have 3 other computers that use all the same members, and they are all very well, so I don't think that the question lies in group policy. It's almost as if the local administrator group settings have been changed somehow? I went into the local group policy and all settings seem correct. I'm puzzled little at this stage. This could be the cause of this problem? What is a corrupt local administrator account? For any help or suggestion would be greatly appreciated!Thank you!Hi Jay,.
Thanks for posting your query in Microsoft Community.
The question you have posted is linked to the domain. It's going to be better suited than it pro. I suggest you post in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threadsI hope this helps!
-
What opening of database Service of Cloud Computing console receiveing "the user role cannot access the Cloud database Service" message and see no service. Why?
Thank you in advance.
Try now
-
TypeError: Error #1009: cannot access a property or method of a null object reference. Why do I always have problems mind flash and shockwave. Why adobe does not solve their products?
.
This isn't a problem of Flash... it's a mistake to designer.
1009 error indicates that one of the objects targeted by your code are out of reach. This may mean that the object...
-is declared but not instantiated
n ' is not have an instance name (or the name of the instance is misspelled)
n ' is not in the frame where this code tries to talk to her
-is animated in place, but is not assigned the name of the instances of each keyframe for her
-is one of the two or more consecutive keyframes of the same objects without a name assigned in the image previous (s).
It could also be other less obvious reasons.
If you go to your section to publish the Flash settings and select permit debugging option, your error message should have a suite of line number the number of the frame that will help you to isolate the object that is involved.
-
I guess that's cheezy to offer money to help (and I guess this a little tied to a post being discussed yesterday), but I'm so tired of searching - been trying things ALL day and its value at a minimum of $ 50 if someone takes a while to help with an explanation of what is happening and how to fix it (hopefully it's just a matter of newbie that I) be cursing myself for lack.)
I have things to a restricted version of the app to demonstrate the problem. You can download (link at the bottom of page) and just run the html/SWF in bin-debug and you will see the problem (or perhaps understand the linke also supplied code). Click Connect and then ' Add used ' and it just put the cursor in the firstname field and click. You'll find yourself with the following error:
TypeError: Error #1009: cannot access a property or method of a null object reference.
at mx.managers::FocusManager/focusInHandler() [C:\autobuild\galaga\frameworks\projects\framew ork\src\mx\managers\FocusManager.as:601]
to flash. display::Stage / set focus()
at mx.core::UITextField/setFocus() [C:\autobuild\galaga\frameworks\projects\framework\src\mx\ core\UITextField.as:1525]
at mx.controls::TextInput/setFocus() [C:\autobuild\galaga\frameworks\projects\framework\src\m x\controls\TextInput.as:1832]
at mx.managers::FocusManager/setFocus() [C:\autobuild\galaga\frameworks\projects\framework\sr c\mx\managers\FocusManager.as:553]
at mx.managers::FocusManager/mouseDownHandler() [C:\autobuild\galaga\frameworks\projects\fram ework\src\mx\managers\FocusManager.as:1896]I know that the problem is related to _defaultButton null in FocusManager focusInHandler (at least the debugger shows the problem here), but do not know why this is * there. You will see in two simple display batteries, I've set creationPolicy = "all" (I even tried to set createionPolicy = 'all' on almost all the components.)
View the main relevant files:
Download the sample application demonstrating the issue
http://DL.getdropbox.com/u/86998/EmployeeMaintenanceTest.zip
If you file a bug with your testcase, this will help to make sure we don't break it in Flex 4. I don't know if there will be a new version 3.x.
I got around the problem by adding to the level superior canvas in Main.mxml:
defaultButton = "{mainNavigation.addEmployeeButton}" "
In my view, that principle is once you assign a default button in a container, to keep something like the default button after that. If the focus moves to a container without a default button, then I think he's in trouble.
Alex Harui
Flex SDK Developer
Adobe Systems Inc..
-
Why my VPN clients cannot access network drives and resources?
I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!
: Saved
:
ASA Version 8.2 (5)
!
ciscoasa hostname
Cisco domain name
activate the password xxxxxxxxxxxxx
passwd xxxxxxxxxxxxxxxxx
names of
name 68.191.xxx.xxx outdoors
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.201.200 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address outside 255.255.255.0
!
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
192.168.201.1 server name
Cisco domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group network obj - 192.168.201.0
FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0
NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0
FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any
Extended access list-NAT-FREE enabled a whole icmp
allow any scope to an entire ip access list
allow any scope to the object-group TCPUDP an entire access list
allow any scope to an entire icmp access list
inside_access_in of access allowed any ip an extended list
inside_access_in list extended access allow TCPUDP of object-group a
inside_access_in list extended access permit icmp any one
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access allow TCPUDP of object-group a
outside_access_in list extended access permit icmp any one
Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0
access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0
inside_nat0_outbound list extended access permit icmp any one
inside_nat0_outbound_1 of access allowed any ip an extended list
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 192.168.201.0 255.255.255.0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1
Route inside 0.0.0.0 255.255.255.255 outdoor 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.201.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Keypairs xxx
Proxy-loc-transmitter
Configure CRL
XXXXXXXXXXXXXXXXXXXXXXXX
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP allow inside
crypto ISAKMP policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
allow inside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
Cisco by default field value
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
WebVPN
SVC request enable
internal KunduVPN group strategy
attributes of Group Policy KunduVPN
WINS server no
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Cisco by default field value
username xxxx
username xxxxx
VPN-group-policy DfltGrpPolicy
attributes global-tunnel-group DefaultRAGroup
address VPNIP pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
type tunnel-group KunduVPN remote access
attributes global-tunnel-group KunduVPN
address (inside) VPNIP pool
address pool KunduVPN
authentication-server-group (inside) LOCAL
Group Policy - by default-KunduVPN
tunnel-group KunduVPN webvpn-attributes
enable KunduVPN group-alias
allow group-url https://68.191.xxx.xxx/KunduVPN
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc
: end
don't allow no asdm history
Hello
What is the IP address of the hosts/servers LAN Gateway?
If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.
For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.
- Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
- Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
- Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
- Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
- Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP
So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)
I would like to know if the installation is as described above.
-Jouni
-
Hello!
So I'm at the end of my rope with this one... it lasts for months, and I keep revisitng every two weeks to try and fix that and every time to be completely frustrated. I found this forum tonight, so here goes...We downloaded a few games on the HP Games Web site. We download them and everything works fine. Then, we will open the games and this pop up error message:
"Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.These games used to run fine, and I have no idea why they now have problems. We have a Vista operating system, 1 account who is the administrator, the Parental control is disabled (or if we believe).
If anyone can please help it would be much appreciated! We have a monthly membership to this site of game and continue to accumulate credits, but may not use it. It makes us crazy!
Thank you in advance!
Hello Heathie,
Thank you for posting. It seems that the program is no longer on your computer. This can happen if the game files are deleted, but the game itself has not been uninstalled correctly. I recommend you to download the game again to a location on your computer where you can easily find and install it. This should fix the problem.
Please let me know if this helps you.
Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
cannot access the files of another user with the admin account
I'm on a computer with Windows Vista 64-bit home problems.
I normally have the computer configured to connect automatically to a non privileged user and rarely use the admin account.
Recently, I downloaded an update (Finally, more like a relocation to the latest version) and realized that I need the admin account to install properly for all users that UAC would make things a royal PITA with a zillion prompts.I quickly disconnected and logged in as admin. Then, I realized that the installation file has been stored in the "downloads" folder in my regular account.
Worse still, I could not access this folder, or I couldn't tab of future security. All I could do was to 'change the property' to my admin account, but I really didn't block me on these issues. Even from Explorer using "run as administrator" gave me problems, although the DIR command in cmd.com would be the list of people.I used the "change user" function to log my account regular and checked the Security tab and saw that the "Administrators" Group had already read and checked 'total control '. Why can't access the admin account? As an admin with XP, I had free access to everything I wanted to leave that I wanted.
What happens if I was a parent and wanted to check to make sure that my child was not software piracy or download illegal music that would get stuck with the fines because I'm his guardian? How would I go about checking his records?
What happens if I was an employer at a small office using working groups and wanted to ensure that the employee was not downloading pornography?
How can I use the powers of the administrator to access other files (regular) user?
Why do I still need to ask this question? It was automatic under NT, 2000, XP and the various servers at least as high as 2003.I found the problem, it was ANOTHER problem with Norton Security Suite for Comcast.
I uninstalled and did not only to release 100 GIGABYTES of space, my boot time has been cut to a quarter of the former time, and this problem has disappeared.
Maybe you are looking for
-
Suddenly iPad requires activation
My ipad, a first generation ipad mini. Bought in 2013, has never been jailbroken, first-hand, and IRC is correctly, version 9.2 or 9.3. Recently, suddenly, requires an activation. The worst thing is the indication for the identifier apple is not mine
-
Firefox slow so unusable after a new installation
I just installed Firefox for the first time (v.21).It is almost unusable, it is so slow, need to post this question.Have no idea what he must try, as am completely new to Firefox.All suggestions received with gratitude, at the same time, it is to Int
-
Messages in the console mdworker and lsd
On every few minutes, I get a hundred lines of messages in the console log. Kernel: Sandbox: mdworker (PID #) deny (1) - reading data from the file with the path to applications. What causes them and is there anything I can do to fix all these? I als
-
Error of measures to take account
I'm having a problem with Droid Maxx my husband. He continues to become a "Action account" error notification required... "and then it should connect to your Google account. This happens several times a day or more. I tried everything I can think of,
-
Hide the border of a string indicator
Does anyone know how? I tried to put the T mode for both the foreground and background and clicking on it, but I still have a border. I forgot how to do this. Thank you Dustin