Why my Apple Watch impute watch OS 2.2.1 update tp?

I have the Apple Watch 42 MM Edition gold with black classic loop running watch OS 2.2, and I wanted to update to 2.2.1 watch OS even if it is fully charged and disconnected, just like the iPhone, you can remove the load and updated, but I don't know how. Why do I need to update?

I don't have a watch so I can't help you but your sounds good!

Tags: Apple Watch

Similar Questions

  • Why my Apple Watch does not display my photos when I double tap to show my card to pay with?

    I Double click on the button on my Apple Watch, to pay for an item at the checkout and it maintains show my photo favorites... not the card to make the payment

    with.  I am confronted then with passing by pressing this button several times so that it can display the map so that I can complete the payment.  Why is this?

    Restart your Apple Watch, and then press the button twice to activate Apple pay.

    Restart your Apple Watch

    With the help of Apple pay in shops

  • Why my Apple Watch stopped monitoring exercise?

    My watch has suddenly stopped monitoring exercise.  I'm not terribly active, but I think that I have exercised more than 1 minute is worth today.  Calories and steps are check ok (I think).  Someone knows why or how to fix it?

    Hi Fran

    Progress towards your daily goal of exercise of credit, the application of the activity is to identify the activity equal or exceed the intensity of 'fast market '. The definition of a brisk walk varies from one person to another and depends on your personal information.

    To verify that your personal information is accurate - and update over time:

    -On your iPhone, in the application of Eve, go to: My Watch tab > health > Edit - tap and adjust the settings, then press on in fact.

    In General everyday wear, the application of the activity relies on your movement of arm (measured by accelerometer) to track the movement in order to progress towards the goal of the exercise of accounting. For best results, let the arm on which you wear your watch to swing naturally as you move.

    Calibrate your watch also helps to improve the accuracy of the estimates (including the appropriations for the year) made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below.

    More information:

    Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

    Use the activity on your Apple Watch - Apple Support

  • Why my Apple Watch constantly re - lock?

    I have the band steel stainless link and have tried everything. Right now it's so tight he almost suffocates the wide circulation, but also locks and requires me to enter my code.

    Hello

    So that the wrist detection works correctly, it should certainly not necessary to wear your watch too tight. For best results of this and other features, on the back of your watch must be in contact with your skin. The right fit must be neither too tight nor too loose, with room for your skin to breathe:

    The sensor performance may be affected by the changes as some wrist tattoos permanent or temporary skin.

    Otherwise, the following steps may help:

    • Make sure the wrist detection is open: on your iPhone, in the application of the watch, go to: Watch My > General > detection of wrist.

    If the problem persists, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked and, if necessary, repair (warranty, if it qualifies):

    To check your warranty status (the serial number is on the back of your watch):

  • Why the Apple Watch is not the same as the iPhone health application

    I have an iPhone 6 and a new Apple Watch.  Only a few apps synchronize with the watch, but two most important do not appear on the watch - medical application and the Google app.   I am very disappointed especially on the application of the health.

    Hello

    If you are not satisfied you have 14 days to return the Apple Watch.

    See you soon

    Brian

  • Apple Watch, calling emergency since the update services

    Guys,

    I was wondering if anyone else has this problem, but since the upgrade to ios3 in my watch randomly called emergency services when I rode my bike with my jacket on.

    Obviously gloves are putting pressure on the power and set up the menu, but then the watch button connect to emergency through any way wrist movements activating.  I had understand if it was my right wrist (wrist of accelerator which is constantly moving) but it's my left which is mostly static.  And it shouldn't be activate as clothing.

    Anyone else having this problem, it's a huge problem, apple watches call emergency services at random.

    Thank you

    I have not encountered this problem. You can change the path of emergency sos is started by going to the app shows general, emergency sos on your iPhone and turn off hold automatic appeal. You will need to then press and hold the button side, followed by a simple touch on sos emergency. It may be a solution working, or at least temporarily?

  • Why not Apple Watch

    I think it will be a good idea if the spple look use the Sun as energy source to load instead of having to plug it into an outlet

    Hello

    If you want to suggest this idea to Apple, you can do so via the form on the next page:

    https://www.Apple.com/feedback/watch.html

    It is a community of support based on the user (if you don't talk to Apple here).

  • Why my Apple Watch is constantly with the application of the workout and kill my battery

    Since the last Watch 2.0 update my watch is constantly showing the little running man at the top of the watch.  He seems to think that I work constantly and telling me I'm burning crazy amounts of calories (pretty sure he thinks that my train ride is me currently underway).  For not to mention my battery dies quickly.  I started the day at 630 with 100% of battery, the green light on my wrist has served all day and my battery is at 13%.  How can I fix this.  I have not matched the watch and combined with new, but that solves nothing.  Any help would be appreciated since my watch is basically useless at this point.

    Hi Steve

    Green rider icon indicates that your watch has currently underway training.

    You can currently get a workout paused in the application of the workout or a third-party (for example, Strava) fitness application.

    If you have used Strava or any other third-party application, you must put an end to the activity via this application on your watch (not on your iPhone).

  • Apple Watch hangs on the wrist

    Why my Apple Watch (42mm, series #FH of Sport * 9J6, 6.1 GB, Version 2.2.2 [13V604]) to lock up constantly when he is on my wrist, I have to re - enter the password several times. For this reason, I don't get notifications and heart rate is not taken. My Apple Watch is less than one year. I tried the clamping Strip and moving closer to the wristbone. I tried to put pressure on the back.

    I tried to disable the access code to the watch and it will not allow that. He says several times that I have to enter a new password.

    Help!

    < personal information under the direction of the host >

    Hello

    So that the wrist detection works correctly, it should certainly not necessary to wear your watch too tight. For best results of this and other features, on the back of your watch must be in contact with your skin. The right fit must be neither too tight nor too loose, with room for your skin to breathe:

    The sensor performance may be affected by the changes as some wrist tattoos permanent or temporary skin.

    Otherwise, the following steps may help:

    • Make sure the wrist detection is open: on your iPhone, in the application of the watch, go to: Watch My > General > detection of wrist.

    If the problem persists, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked and, if necessary, repair under warranty:

  • my Apple Watch ceases completely short of charge.i the load every night and 20:00 it is dead!

    Why my Apple Watch continue to run load?

    Hello

    My Apple Watch still has 60% after 15 hours appointment on apple store.

    But the first try reseting désapparier & set it up again.

    See you soon

    Brian

  • Apple pays on Apple Watch does not

    Hello world!

    I'm a big fan of Apple pay, I use it anywhere that accepts it.

    A feature, I can't wait to try it immediately when I got my Apple Watch (24 hours ago only) was paying Apple.

    In the first hour of me set up my watch, I went to McDonald's to get a Coke (it's the closet place who agrees to pay Apple), so I could test Apple pay.

    When I put my watch next to the drive, nothing happened. The screen remained black all the time. To complete the transaction, I pulled out my phone and also, which didn't work. I used pay Apple on my iPhone, several times the same McDonald's before and it's always worked flawlessly.

    A few hours later, I had went to Best Buy to buy wireless headphones and once more tried to use Apple pay on my watch for the purchase. But unfortunately, nothing happened here either. The watch remained black all the time.

    While I was trying to make it work, I noticed my iPhone wake up (he was placed flat on the counter) and displays the message - "Hold iPhone close reader" (I forgot the "exact" wording). When I gave up on the Apple Watch, I took my phone to purchase and it worked perfectly.

    Now, whenever I have install my credit card on the iPhone, I have to check (via a SMS of BofA code). When I looked at the settings in the Apple Watch app on my iPhone - I saw my already credit card. I clicked on the button 'Add' next to her, that I then invited to add security code 3 digit number to check. Once I did, my credit card was placed under the header indicating that it is an active card on the watch. And a few seconds, I had received a notification on the watch let me know it was ready for use.

    I guess it is setup correctly, which miss me so much? Are there any ideas as to why my Apple Watch does nothing?

    Sorry to ramble on and on. I wanted to give you all the details in the hope that maybe someone can point me in the right direction to solve this issue.

    Thank you in advance for your help!

    -Jason

    Hi Jason

    In order to pay using Apple pay on your watch, you must first quickly double - press the side button.

    It will then display your default map. If you have added other cards and you want to use one of them instead, swipe to switch between maps. With your favorite card displayed, hold your watch up to the Terminal:

    -The dial of the watch must be faced with and parallel to the screen of the own terminal (you shouldn't be able to see the face of the watch and pay), aligned in the Center with the logo without contact on the terminal screen and held less than 10cm.

    -It must be blocked in this position for up to a few seconds, until you hear the confirmation beep and the pulse haptic.

    More information: defining and using the Apple pay with your Apple Watch - Apple Support

  • changes and time zone of Apple Watch

    When traveling outside United States, I want to change my time to watch to the local time and the time with my iPhone and the computer on the House in time, otherwise my calendar events to change the time, having been placed on the calendar in local time.  Is there a way to change the watch time regardless of the time of the iPhone? Apple Watch and the latest software updates

    Hello

    No - it is not possible to change the time on your watch regardless of the time on your iPhone.

    It may be useful to use a complication of the clock of the world on the dial of the Watch:

    https://help.Apple.com/watch/#/apd06093d4ae

  • Can't update Apple Watch help!

    I have a first GEN Apple Watch. I tried to update the watch OS but I get an error every time.

    I did a hard reboot on my phone and my watch. I did a hard reboot on my phone and my watch. I didn't receive any notification on the watch more, became unnecessary.

    He started since I upgraded to ios10

    To watch. ggg

    < image edited by host to remove the serial number >

    Hello

    The following steps may help:

    • Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).

  • Impossible to update to Apple Watch

    I have a first GEN Apple Watch. I tried to update the watch OS but I get an error every time.   Even if watch OS 3 is released it is eager to update me on 2.2.2 and it won't let me do that. I did a hard reboot on my phone and my watch.  Same problem every time I press on install and he asked my password on my phone and then I get an error when I click on the details of the error I just just goes back to the screen moved.  Any help would be great

    First install the 2.2.3 OS then you can update to OS3.

  • Travel in time Apple Watch stopped working.

    Travel in time Apple Watch stopped working after the update to WatchOS3. I hope that this useful feature has not been removed

    Hello

    Time travel is disabled by default in watchOS 3.

    To enable it on your iPhone, in the application of the watch, go to: Watch My > clock - turn on the trip in time.

Maybe you are looking for

  • Shortcut to Voice Dialer

    Hello Y at - it a physical, external shortcut to the voice dialer on the Cliq? On many phones, you need to just press and hold the green button to launch, but like the Cliq is default this key I do not know what is the shortcut. I guess there will be

  • Reinstalling Windows XP on a Dell Optiplex 760

    Nice day I reinstall Windows XP on a Dell Optiplex 760. The system came preloaded with it, even if the certificate of authenticity (COA) indicates has a license for Windows Vista professional. I'm reinstalling provided factory recovery disc. My quest

  • I do not understand why my creation of windows DVD burn only 1% of one of my windows movie maker projects.

    Hello I made a video of my Windows Movie Maker project and have tried several times to burn through my Windows DVD Maker with the burning of 7% max.  After that, it gets stuck.  However, my other several attempts were a result of burning of 1% and it

  • Error when updating of 5.0.0.1049 :(blackBerry Smartphones

    My blackberry "BOLD" 9000 has received an update from 4.6 to 5.0 YAY I thought how ever this is what happened...     I have connected my 9000 to my laptop, open the clicked Desktop Manager to install and it says first... "one or more error cannot be

  • How to check a document empty before trimming

    Cut the poster error document in photoshop below."Could not cut, because this would create an empty document."