Why my converter is not called

Similar Questions

• Why getter VO is not called for custom attributes of VO?

  Hello
  
  The requirement is to add two or three fields on a page of the OFA. Here's what I did:
  
  -Created VO personalized by extending the standard VO
  -Added fields to the page through customization.
  
  The problem is that the values for the custom page fields were not. Investigation, I found that the accessor Get of VORowImpl getAttrInvokeAccessor was not called for my custom attribute. I tried to check the difference between the attributes for which the Get accessor is called, and for whom it has not named. I could not find and I'm totally clueless as to what determines the get accessor to be called.
  
  Really appreciate your help to move forward.
  
  Thank you
  Anil
  
  Published by: AnilMenta on March 5, 2013 10:40

  Hi Anil,
  Unless the attribute is not used in the user interface or other calls,
  the Get accessor will be called
  Make sure you've got the attribute used to get your custom attribute named getter.

  You mentioned that you started to use in customization, it is always the problem persists?

  Thank you

  With respect,
  Kali.
  OSSi.

• Trigger not called

  I'm trying to understand why my trigger is not called:
  
  Here is the description:
  (1) I have a table TABLE_A (NUMBER of TA_ID, TA_VAL NUMBER (1,0))
  (2) >
  CREATE OR REPLACE TRIGGER TRG_ON_TABLE_A
  BEFORE INSERT ON TABLE_A
  FOR EACH LINE
  BEGIN
  Dbms_output.put_line (' this is a test.) The ID is ' | (: new.TA_ID);
  END;
  >
  (3) I connect with sql * plus, set serveroutput on, then
  >
  insert into TABLE_A VALUES (1, 1);
  >
  (4) >
  This is a test. The ID is 1
  
  1 line of creation.
  >
  5) now my problem: I run an insert that will raise an error:
  >
  insert into TABLE_A VALUES (2, 't');
  >
  (6) >
  
  ERROR on line 1:
  ORA-01722: invalid number
  >
  
  What can I do to retrieve values attempted in the insert statement? Why the BEFORE INSERT trigger is not called?
  
  Any help is very appreciated
  G

  Maybe there are several definitions of parse, but in my opinion, the statement in fact.

  For example:

  The required version information:

  SQL> connect demo/demo
  Connected.
  SQL> @get_version
  
  PRODUCT                                          VERSION
  ------------------------------------------------ ----------
  NLSRTL                                           11.2.0.1.0
  Oracle Database 11g Enterprise Edition           11.2.0.1.0
  PL/SQL                                           11.2.0.1.0
  TNS for 64-bit Windows:                          11.2.0.1.0
  
  4 rows selected.
  

  Now, create the test table as OP has:

  SQL> create table table_a(ta_id number, ta_val number(1,0));
  
  Table created.
  

  Try the same SQL with active monitoring:

  SQL> alter session set events '10046 trace name context forever, level 12';
  
  Session altered.
  
  SQL> insert into table_a values (1, 'T');
  insert into table_a values (1, 'T')
                                 *
  ERROR at line 1:
  ORA-01722: invalid number
  
  SQL> exit
  

  So, what do we have in the trace file and the tkprof output?

  Trace file:
  PARSING IN CURSOR #3 len=35 dep=0 uid=96 oct=2 lid=96 tim=3270176764 hv=384515013 ad='7ff73fb6e08' sqlid='dsx7y5hbfqfy5'
  insert into table_a values (1, 'T')
  END OF STMT
  PARSE #3:c=0,e=57,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=0,tim=3270176764
  EXEC #3:c=0,e=71,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=0,tim=3270176898
  ERROR #3:err=1722 tim=3270176916
  
  Tkprof output:
  SQL ID: dsx7y5hbfqfy5
  Plan Hash: 0
  insert into table_a
  values
   (1, 'T')
  
  call     count       cpu    elapsed       disk      query    current        rows
  ------- ------  -------- ---------- ---------- ---------- ----------  ----------
  Parse        1      0.00       0.00          0          0          0           0
  Execute      1      0.00       0.00          0          0          0           0
  Fetch        0      0.00       0.00          0          0          0           0
  ------- ------  -------- ---------- ---------- ---------- ----------  ----------
  total        2      0.00       0.00          0          0          0           0
  

  Note that the error is reported during the execution phase and not the analysis phase (unless I'm completely misunderstanding). The tkprof watch 1 analysis and 1 run. If the failure occurs during the analysis phase, the execution phase is not reached. For example:

  SQL> connect demo/demo
  Connected.
  SQL> alter session set events '10046 trace name context forever, level 12';
  
  Session altered.
  
  SQL> -- create an error during parse phase
  SQL> insert into table_a values (1, 'T', '?');
  insert into table_a values (1, 'T', '?')
              *
  ERROR at line 1:
  ORA-00913: too many values
  
  SQL> exit
  

  The corresponding trace file shows:

  Trace file:
  PARSE ERROR #3:len=40 dep=0 uid=96 oct=2 lid=96 tim=3681813474 err=913
  insert into table_a values (1, 'T', '?')
  
  Tkprof:
  The following statement encountered a error during parse:
  
  insert into table_a values (1, 'T', '?')
  
  Error encountered: ORA-00913
  

  Here it is clearly a mistake while that in the footsteps of the previous, the analysis did not report an error - the error was raised during the implementation phase.

  Using a servererror after trigger can be something that could be changed for the application here.

  It is an output completely quick and dirty and no flesh possibility:

  create or replace trigger schema_error_trap
  after servererror on schema
  begin
    -- do something meaningful here...
    -- this is just for a simple test.
    dbms_output.put_line('Error trapped on statement:');
    dbms_output.put_line(dbms_utility.format_error_backtrace);
  end;
  /
  

  Quick test:

  SQL> insert into table_a values (1, 'T');
  Error trapped on statement:
  insert into table_a values (1, 'T')
                                 *
  ERROR at line 1:
  ORA-01722: invalid number
  

  So, at least, it is possible to capture the statement that caused the error. Note that when you use a binding, you get the name bind, not the value, so this could be of any use for this purpose. On the other hand, it might be enough to start.

  Kind regards

  Mark

• Why I can't receive calls, and why not activate my iMessage? I can't send or receive texts

  Why can't I receive calls? And why not my iMessage never activate? I can't send or receive texts

  You seem to have more than one thing is done. Calls and texts (SMS) are a function of carrier. If you are unable to receive calls, you must contact your operator. You can make calls? Regarding activation of iMessage, I believe that it is related to your problem of text. IMessage activate, the phone sends a SMS hidden on Apple servers to the United Kingdom. If your carrier doesn't support iMessage, either you don't have a SMS plan for your phone, then it will not send, and your phone will not receive the answer. Check with your carrier to solve the problems of your cell phones.

• toString, method why it is not called implicitly for objects

  class building {}
  public class Example
  {
  Public Shared Sub main()
  {
  Building b = new Building();
  String s = (String) b;
  }
  }
  
  in the 5th line it shows error that cannot cast building type in string...
  but all classes have the toString method that is called whenever we give the object argument in System.out.println ();
  
  the following code compiles
  
  class building {}
  Class Example
  {
  Public Shared Sub main()
  {
  Building b = new Building();
  System.out.println (b);
  }
  }
  can someone explain this?

  is the tostring method implicitly called only in println where he expects a string?

  It is not called implicitly anywhere. It is explicitly called by println (Object).

• Why Manager click UIComponent is not called?

  I am trying to extend a uicomponent and I need to put

  it focus whent will be on it.

  But click Manager is not called.

  How can I do this?

  You don't really have any user interface in your UIComponent. I think you need something to deal with such events.

  If this post answers your question or assistance, please mark it as such.

  Greg Lafrance - Flex 2 and 3 certified ACE

  www.ChikaraDev.com

  Flex / development, training, AIR and Support Services

• How can I convert an incoming call read only an attachment so I can change it?

  How can I convert an incoming call reads only attachment so that I can change it? Save in Word does not it, and find research peut t.

  So, the problem seems to be that attachments are stored as files read-only by Thunderbird and an application it can open without editing privileges, so you cannot change the. Read-only mode was chosen because these files are kept in a temporary location. For example, if you modify and save the back, they are deleted when Thunderbird is closed, so losing your changes. The idea is to force to save you to a different location. You should be able to do it, then open it from that location with full editing capabilities.

  For a permanent change in this behavior, go in the [tools >] Options > advanced > general tab and click on Config Editor there. After you confirm the warning, copy - paste browser.helperApps.deleteTempFileOnExit into the search bar and switch false to true by double clicking on it. Now, saved attachments are created with read/write permissions, but is more removed when Thunderbird is closed (i.e., stored in % AppData%\Local\Temp).

• Why my printer does not print with Windows 8?

  Why my printer does not print with Windows 8?

  Did you just upgraded or purchased a new computer with Windows 8, and now you can't get your printer to work?  If so, this can help you.  Many people have questions about the installation of their printer on a new OS.  This will help you answer these questions and make sure you get everything installed.

  Before you start

  Before you try to install the printer on a Windows 8, you should check to make sure that the printer is compatible with the new OS.  The link below will give you a list of printers that will work in Windows 8.

  http://support.HP.com/us-en/document/c03168175

  If you have upgraded your computer to Windows 8 formed another version of Windows, make sure all software uninstall complete of your printer.  It should still print, but to use all the features, you will need to reinstall the software, if available.

  Another thing to consider is how you want to connect the printer to the computer.

  1. USB.  You must ensure that you have a USB cable which does not exceed 6 feet (about 2 m).  Be sure to connect the printer directly to the computer.  Do not use a USB hub.
  
  
  2. Ethernet cable.  Make sure you have the network configuration, you have a free cable port on the router, and you have an available Ethernet cable.
  
  
  3. Wireless.  You must ensure that you have the configuration of the wireless network, and you have the password of the wireless network.

  1. installation Via USB

  Installation via USB in Windows 8 became much simpler for users of HP printer.  In other versions of the Windows operating system, you need to launch the installation and wait that it asks for the USB connection.  If you do not, you will need to uninstall the printer from the devices and printers folder and then launch the installation.  In Windows 8, which won't be a problem.  If you plug the USB cable from the printer and then install the printer software, work remains.  Now for in depth instructions on installing the printer via the USB port click on the link below.

  http://support.HP.com/us-en/document/c03521864

  2 installation Via an Ethernet network connection

  For an Ethernet connected printer, the installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It's really as simple as that.

  http://WWW8.HP.com/us/en/support-drivers.html

  3 installation Via a wireless network connection.

  For a wireless printer, network installation is disconcerting.  All you have to do is to connect the printer to the network.  Once you have done so, Windows 8 will automatically install the drivers for you.  Then, all you have to do is install the rest of the software, if available.  It is roughly the same as just Wireless Ethernet installation.

  http://WWW8.HP.com/us/en/support-drivers.html

  Alternative installation methods

  With Windows 8, the drivers of many printers are installed with the operating system.  These are called pilots InOS, since they come built-in to the operating system.  If you have one of these printers, you should have to do simply connect it to the computer via USB, or connect to the network via Ethernet or wireless.  Once you have that makes Windows will take care of the rest.  There are other methods of installation of your printer if normal methods don't work for some reason any.  You can install the printer is using the printer, or through Windows Updates Setup Wizard.

  Set printer wizard:

  http://support.HP.com/us-en/document/c02681060

  Windows Update:

  http://support.HP.com/us-en/document/c03460648

  Note: The drivers of Laserjet for the Asia-Pacific and the Japan will come only at a later date.  See below the link support site for the availability of the driver.  I will update this post once they become available.

  http://WWW8.HP.com/us/en/support-drivers.html

  Hope that answers some questions.

• Why my icons do not respond? I can't just click to open a program

  Why my icons do not respond? I can't just click to open a program, I have to right click and then click on 'open '.

  Can anyone help?

  Don't fall for the scam to buy XP 2010 Malware If yes call your credit card company and get them to freeze all payments due to the SCAM!

  You need do a right click in your program or link and choose 'Run as' In the dialog box, uncheck the «Protect...» ». Say ok and now everyhting will work.

  OR

  Download the registry for file association dougknox fix -http://www.dougknox.com/xp/fileassoc/xp_exe_fix.zip

  Run this tool, and most likely it will solve your problem.

• Extended method of field paint will not called

  I would go to a field and would like to paint something there.

  By extending the field I must apply setLayout (int x, int y) wcich get is called successfully.

  Thing strange number one: x is 360 (that's fine because I have it returned by getPreferredWitdh), there is

  1073741803 which is more hell? In getPreferredHeight I returned 480...

  Second, my method of painting is not called at all! See code below.

  You forgot to call your layout() setExtent() while defining the scope of the field is the main object of the layout () - to tell the parent Manager how much space you wish to occupy. Without putting your width and height are (0, 0), which explains why your parent Manager never calls object of your field.

  The fact that you get almost unlimited height in your layout() is also easy to explain: you probably use screen that has default VERTICAL_SCROLL.  And managers who have VERTICAL_SCROLL allocates Integer.MAX_VALUE > 1 pixel at the start for their children.  Your LabelField consumed 14 of this value (using setExtent (textWidth, 14), of course) and then screen offered the rest of your domain.

  Also note that getPreferredHeight() and getPreferredWidth() are ignored by the vast majority of managers and fields.

• JavaFX 2.2 initialize is not called when using ControllerFactory

  Is there a reason why the initialize method is not called when specifying a controller factory (by calling FXMLLoader #setControllerFactory) instead of an instance of a controller (via FXMLLoader #setControllerFactory)? By the "initialize" method, I mean one of the following:
  

  public void initialize()
  @FXML private void initialize()
  @Override public void initialize(URL, ResourceBundle) /*as defined in the Initializable*/

  Published by: 951674 on August 8, 2012 12:27

  First of all, I'm not using the static version of the load method. I call class #getResourceAsStream not the #getResource class.

  Well Yes, you are right. I read it too fast. See? Source of confusion. ;-)

  But just to repeat what said Tom - Yes, fx:controller is always necessary, even if you specify a controller factory. The type specified by the fx:controller attribute is the type that is passed to the factory. If you do not specify a type of controller, then the plant is not called.

• Why tree DND does not support COPY or INSERT?

  The mx:Tree default drag - move only supports the MOVE. For example, you can drag an item from the tree and _move_ to tree B but cannot _add_ that the point b of the tree, unless you extend mx.controls.Tree, override dragDropHandler() and dragCompleteHandler() and, if lucky, write the right logic to calculate the insertion point and insert into the right place in the data structure tree, etc. etc.
  
  Why application developers should do this just to add items from a tree to another?

  I managed to do the minimum work to get what I need: drag and copy items from one tree to another. I outweigh tree: dragDropHandler () - If this is a MOVE operation, call great; Otherwise, I copied the MOVE code in Tree.as (less than 50 lines), then eliminated controls if (MOVE); with a little cheating on the namespace, the code simply works!
  It is still beyond me why this behavior is not embedded in the Tree.as.

  BTW, thanks for the pointer to the new DND doc!

  -James

• The entity not called adapter not

  Hi all
  
  I would like to send a form of resource information to another form of resource.
  
  The first form of resource is updated by an approximation of the target (not approved). I ve created an adapter of entity to trigger the update record resource and wait that it runs when a new recon event is received and matched.
  
  What is going on:
  
  (a) run target Recon
  (b) information is correctly updated in the form of resources
  (c) entity adapter is not called.
  
  If I go to the form of resources and Edit - save (without modification), the adapter of the entity is called and tasks run very well.
  
  Clues why the adapter of the entity is not called automatically?
  
  Thank you

  Reconciliation events trigger an update to the forms. You can trigger a task of the intervention of an update of reconciliation to perform tasks you want.

  -Kevin

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• Why when in a not tab home page and I click on the Home icon, FF will print what is in the current tab and will not go to the home page.

  Why when in a not tab home page and I click on House icon, FF goes for what is in the printing tab and when I cancel the preview before printing, FF does not go to home page back to Homepage no tab.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?