Why my drawings are saved as PNG files and not as the vector files?

Similar Questions

• using the toll sytem of professional backup backup, XP my documents and settings, are saved outlook data files

  using the toll sytem of professional backup backup, XP my documents and settings, are saved outlook data files

  Hi cmoore2685,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista

  http://support.Microsoft.com/kb/309340

  For reference:

  How to back up and restore Outlook Express data

  http://support.Microsoft.com/kb/270670

• Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Michael T.L. says:

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• "the settings saved on this network do not match the network requirement" is the message that I get when I try to connect to my wifi

  I changed my router to another wireless.  Since then, my laptop cannot connect to my wifi.  When I search my wireless network, it is exed out in red.  and the message "the settings saved on this network do not match the network requirement"... Please help

  [moved from comments]

  Hey Mike,

  -What version of Windows is installed on the computer?

  This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387

  Let us know if this can help, or if you have any questions.

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Why "bgp bestpath missing-as-worst med" command does not produce the desired result?

  Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
  And I use GNS3 to this practice, the IOS Version: 12.4 (3)
  TKS...

  Back to the beginning:
  192.168.23.0/24 192.168.12.0/24
  RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
  [AS1]                    [AS2]                    [AS3]

  Configuration:
  * RA *:
  A #do sh run (config - router). b r b
  router bgp 1
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  192.168.12.2 neighbor remote-2
  setmed map of nearby route 192.168.12.2 out
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  setmed allowed 10 route map
  the metric value 20

  * RB *:
  B (config - router) #do sh run | b r b
  router bgp 2
  no synchronization
  BGP always-compare-med
  The log-neighbor BGP-changes
  BGP bestpath missing-as-worst med
  neighbor 192.168.12.1 distance-1
  neighbour 192.168.23.3 distance-3
  No Auto-resume

  * RC *:
  C (config - router) #do sh run | b r b
  router bgp 3
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  neighbour 192.168.23.2 distance-2
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  But when I checked out table RB bgp, as below:

  B (config - router) #do sh ip bgp
  BGP table version is 2, local router ID is 192.168.23.2
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete
  Network Next Hop path metrics LocPrf weight
  * > 1.1.1.0/24 192.168.23.3 0 0 3 I
  *                          192.168.12.1            20                         0  1 i

  The prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(

  Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:

  https://supportforums.Cisco.com/thread/343397?TSTART=0

  Note that BGP MED is set to 0 even if the injected BGP route from a connected route.

  The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.

  Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).

  I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?

  p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.

• Cc of Lightroom will not import my files, it is said that they are not recognized, why it doesn't matter that a DNG and not a raw file, I use a canon 5 3

  Can someone tell me why Lightroom cc wants to import my files under a DNG, I used to import as a raw file, it says the files are not recognized, I use a Canon 5 3 and never had the problem before, he said actually the Raw Format is not supported in Lightroom.

  Thanks in advance John.

  Hi, dj_paige,

  I managed to sort it out, the problem was when I used my Kingston card reader to import my images in LR Cc, it would not recognize the file format, so when I thought a little more, tired of importing directly from my 5 d 3, it worked very well, so now I need to find a card reader supports LR CC ,

  Thanks for your reply, regards, John.

• Music files are deleted and not in the trash. RealPalyer? iTunes? And my hard drive has failed. I'm not a backiup error code

  Well I'm puzzled! I was ofline for a week, but I have recently installed to realpayer, also have itunes and media center. Well, someone removed my music! Beegees to mr. bungle, the files are gone! not in the trash, Whats up? No one else has access to my computer. It's a dvV9620 HP Pavillion w / vista.
  I installed to bitcomet and just installed malwarebytes anti-malware. already running mcaffe suite only.
  ALSO, I got a message from one of my drives is going to die, its my DATA d, the disk drive is ok. I'm doing a backup but cnanot, it gives me an error code: 0 x 80070002. Plan on replacing soon with a bigger drive.
  None of my videos are deleted, lost stuff from youtube.
  I can't understand where will my music! Help!  And since I downloaded RealPlayer, I noticed that when I burn a disc with windows media center, it burns in cda instead of mp3 format. Just who prevailed here?

  Thanks, I was able to make a creation of HP recovery disk, which I hope is what will be needed for the installation. my D drive is a failure, will pull on it, install a 500 GB on my cdrive, and put the old drive to 120 GB of drive c as the d drive.
  any advice is welcome.
  Deleting files of MUSIC thing - appears only full albums and CD have been affected, none of the songs from youtube are touched, weird...
  I checked under my PC USERS, delete a user called ASP.NET, have no idea where it came from, bitcomet blocking in the future.
  SUX having to rip my CD in my media library again... I have hacked huh?

• Why my PC now starts with black background and not authentic message?

  Original title: why PC starts in Mode safe?

  I have Microsoft Windows Vista Home Premium 64-bit Edition.

  Before going on vacation, I turned off all power. After that we are back and turned on PC, system booted in safe mode.  Screen has black background.

  Message reads; Windows Vista (TM) - Build 6002 - this copy of Windows is not genuine.

  What could have happened? PC was working fine before our departure.

  Moved from Vista Performance and Maintenance Forum.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-Windows

  What is the validation, and how does it work?
  Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
  Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvista

  Authentic Microsoft software program privacy statement
  What data is collected?
  http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Cannot open iTunes and not all the music files in Media Player

  original title: I can't open itunes and it worked only recently and for some reason any all my music files went to media player

  as the title suggests it is happening.  I tried to uninstall/install, safe mode and a few other things.  I'm out of options

  Hi Adaminoly,

   

  Thanks for posting your question in the Microsoft Community.

  I understand that you are unable to open iTunes and all music files replace the media player. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will try to help you in the matter of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. you receive an error code or message?

  I suggest you right-click on any of the music file and click Open with, click Choose default program select iTunes and check the issue.

  For more information:

   

  Contact iTunes Support:

  http://www.Apple.com/support/iTunes/

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

   

• Why is - CompItem.frameRate 29.9700012207031 for NTSC and not 30000/1001 = 29.9700299700299700... ?

  It is perhaps a stupid question I have slept during in "Vidéo 101", but I'm still her asking:

  Why is a CompItem NTSC (29.97) .frameRate 29.9700012207031 and not 29.97002997003 as 30000/1001 would assess to JS? (This is a deviation from 0.00002874932687..)

  This of course also affects .frameDuration, which is 0.03336670003337 instead of the 0.03336666666667 expected (0.0333666...)

  
  

  I thought that 30000/1001 was the way to derive 29.97 in. I'm wrong, or what is the explanation?

  29.9700012207031 seems to derive from 982057/32768. (Why?)

  Sorry, it's my fault. Back to 1994 when AE was in its infancy, someone told me that the true framerate of the video was "29.97 frames per second. No problem, I thought, that we already use a rational system for the moment internally. So I coded as 2997/100. Of course it should really have been 30 000 / 1001 like you mentioned above.

  And it would be easy to change. But it would cause various problems with existing projects and existing expressions that may have workarounds in their code.

  So we decided to leave it unchanged. For the most part, people don't notice. We do not have to take into account the tiny difference in the AE of body/SOUL connection more dynamic links or writing XMP metadata. Maybe someday change us in sufficient numbers and take on the conversion of project. But I don't think we could ever promise that he would do things for old projects (i.e. exact same results as before). The best transition plan could be to have a checkbox by project mode: 2997/100 or 30000/1001. And default to the correct value for new projects. But these things always have involuntary break, so until the pain becomes unbearable there will be probably left it as it is.

  -DaveS

  P.S. Is the new deviation of 29.97 floating-point because framerates internally are passed around point fixed 16.16. But we never do math with this value - it gets converted to the exact 29.97 internally, or we use the value duration, which is also an exact rational.

• Line is no longer allows a display of gallery - the thumbnail and not save the names of the drawings. It is not available on Adobe cat is able to answer these questions.

  Is anyone having problems with the line and iOS 8? I can't record or name my files or see to the gallery.

  Hi Tmhenton,

  I'm in iOS 8.0.2 and it works very well for me. I am able to view all the projects and their designs and when not in an individual design and can use pinch or expand gestures to zoom in or zoom out for miniature display of project/drawings.

  I can rename projects by doing the following (click to see larger)

  

  You can try these if you're having trouble

  1. Completely power off and back on your iPad. time to hold the power button
  2. Save no matter what projects/drawing you want to save, and then reinstall the application

  Hope that helps,

  -Dave

• Download Manager: is is possible to cancel a download and not delete the partially downloaded file?

  There seems to be no way to change the default behavior for the Cancel button the Download Manager.

  I would like to be able to break a download link without losing what I have downloaded so far.

  At the moment to achieve, I stop the download, move the files, and then cancel the download. It of messy and got to make mistakes in the past.

  Thanks for your suggestions.

  You have changed the investigation once more.

  • "If you state categorically that Firefox will remove always download files when you press the Cancel button, I will mark this topic resolved."

  That seems unlikely,
  and in a certain extent depend on system set-up, and for example if you download to a temporary directory, regardless of what Firefox does or not doing the files will be probably deleted a date closer.

  The above is another question, but again, you have asked initially

  • "I would like to be able to break a download link without losing what I have downloaded so far."

  Sometimes, it is possible.

• Wise sent emails are sent to my Inbox and not the customers. My e-mail settings do not seem to send them.

  I try to send e-mail from wise direct to customers, but the emails only go to my Inbox. When I check every email they are sent to the customer using their email address and in the box of my address email is listed. I think I need to adjust the settings in Windows Mail to allow emails to go Sage, then on the client and then show in my Outbox and not my Inbox.

  http://www.Sage.co.UK/

• where are my minimizing; button maximize and close on the PC screen toshiba satellite laptop

  I am unable to see minimize maximize and close X buttons on the screen of my computer toshiba satellite laptop. I'm new on this laptop. Previously, I was using sony vaio and google chrome as my browser. I installed google chrome in this new laptop but without these buttons, it is difficult for me to change to different windows. Help, please.

  Hi rafik,.

  Welcome to the Microsoft community.

  The details provided, I understand that the close, minimize and maximize buttons do not appear in Google chrome. I need more information to help you in a better way.

  1. is the issue limited to Google Chrome?

  2. is it a Google chrome application or program that you have installed?

  Here is some information that might be useful to address the issue.

  You can use the Alt + Tab keys on the keyboard to switch between windows. You can try to press F11 and see if works.

  If you are referring to an application, you can see the following link for more information on how to close an app.

  http://Windows.Microsoft.com/en-us/Windows-8/how-close-app

  You can contact support for Google Chrome to get help if the question is limited to Google Chrome.

  You can refer to the link.

  http://productforums.Google.com/Forum/#! Forum/chrome

  I hope this helps. For the Windows questions or issues, please get back to us. We are here to help you.