Why my games will not play on my computer

Similar Questions

• Why some DVDs will not play in my computer DVD player?

  I have a small collection of commercial DVD movies.  Most of them come from the place of the U.S. market, and some come from Asia... He play ALL these DVD in my Phillips DVD player that is connected to my TV.

  But only some of these DVD will play in my DVD player which is in my computer Dell Inspiron 531 with Windows 7 Ultimate edition.  This computer has a DVD/CD SAMSUNG HD161HJ SCSI disk drive.

  Some of the DVDs that will play on my computer are the American market, and some of them are of the Asian market, so I don't think that this has nothing to do with why some of these DVDs will not play on my computer.

  DVDs that play fine in my Phillips DVD on my TV player that will not play on my computer don't yet seem to close at play on my computer.  The DVD that will play on my computer liquidation (you can hear the noise) in the DVD player in 20 seconds and they start playing automatically in Windows Media Player... but I welcomed all others who won't have to sit in the DVD player for several minutes each in my tests and nothing happens... There is no wind sound and all nothing is happening on the computer screen.

  This doesn't seem to be a problem with the driver software for the disk hard because some of the DVDs will play.

  None of these DVDs are buckled and all of them are clean.

  I tried two or three times test each of DVDs that won't play, the removed from drive and put them back in.

  Does anyone have any suggestions?

  Thank you

  NuMetro

  Hi Dale,

  Although I never had no problem with the DVD or the CD I burned on PC, I think you're going to probably the same thing, that I've been with this internal DVD/CD player, is not a software problem, but just the characteristics of a lower quality DVD/CD player, and it isn't necessarily the symptoms of a dying man in car , but just a stock car low quality that some computer manufacturers cut corners with.
  The drive in the computer that I was referring in this thread is a DVD/CD SAMSUNG HD161HJ SCSI disk drive. Which may or may not be identical or similar to the reader, you have problems with, but the computer on which the reader is underway is a Dell Inspiron 531.
  Through the information that I've gathered on this thread and on another forum, I came to the conclusion that it's just a cheap player who gives intermittent performance recognizing various DVD, but as I said, the drive I troubleshooting always recognize DVDs and CDs that I burned in it... It was just the DVD movie that I have problems with.
  I dug my loyal reader DVD LaCie and plugged and I had no problems with him acknowledging and play ONE of my DVDs on this machine, which proves that the problem has nothing to do with the software system or DVD player software, as in the case suggested by someone else on this thread.
  Just buy yourself a Firewire drive or USB-2 DVD decent and you're probably fine.
  NuMetro

• Game will not play. I get a lee.exe is not a valid win32 application method

  Original title: game will not play

  Game and Compatibility Wizard used responsible... but he will not play... I get a lee.exe is not a valid win32 application method... How can I solve this problem.

  Have you tried the steps in the link Imran gave?

  Reinstall the game should solve the problem.

• I have a Toshiba Satellite C655-S5305 application, running Windows 7. I made a few cds of music there are chandeliers and that they will not play on this computer. They do not play on my computer of husbands, good girls.

  I have a Toshiba Satellite C655-S5305 application, running Windows 7.  I made a few cds of music there are chandeliers and that they will not play on this computer.  They do not play on my computer of husbands, good girls.  I think that they are MP3.  My cd drive is appearing and showing to work properly, but just read it as a blank CD.  To go with this... I am a legal transcriptionist and use a program called FTR player.  I downloaded some MP3 audio files and who won't play in my FTR player either, so I think it has something to do with. MP3 files, in the form of .wav files play in my FTR player very well.  Any help would be greatly appreciated.  Thank you in advance, Jodi

  Red flag.  CCcleaner.  If you used to "clean" your registry database, which can cause problems.  CCcleaner is also a good program, but registry cleaners do not help and remove what they think are "unused" entries in the registry that can cause problems later.

  Try to download the Real Player and see if that corrects your problem, but if it is not, you may need to restore your computer to the factory settings by your user guide's instructions.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. External hard drives 1 TB are about $85 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• My flash will not play on my computer for customers

  I created a flv and downloaded on the website of customers.

  If I jump online and look at the files play fine.  If I watch from my wife's computer, she plays very well.  I even called 3 or 4 friends and it plays a lot for each other.  They are various computers and various internet connections.  He plays very well for everyone BUT my client.

  Located here

  http://www.evisland.com/pages/CompanyStatement/EV_Island_CompanyStatement.html

  Video has been encoded using the following settings using Adobe Media Encoder.

  . FLV

  Codec: On2VP6

  The size is... 640 x 420ish

  Kbps = 768

  VBR

  The file .flv and .swf and html are all in the same folder on the Web page.

  Total file size is approximately 3-4MBs.

  It's hosted on a GoDaddy server.

  MY ISP is AT & T Uverse.

  The file was created in a studio, gave me as a QT movie. I converted it to Flash published in Adobe FLash CS4 and Adobe GoLive allows you to put it on the web and maintain their Web site. I've never had problems like this before.

  My client is on AT & T Uverse

  Mac, Safari using a wireless connection to connect to a Uverse router.

  The video on the link above will not play on his computer.

  
  I had him clear its cache which, said, he did.

  It can play video from other pages in the site, but not this particular video one

  I'm puzzled and are looking online for always looking for a solution.

  Someone at - it ideas?

  Could you please mark this thread as solved?

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• Why the videos will not play in Firefox?

  Videos on the YouTube sites and new will not play. Everything worked last night. This afternoon no videos don't play. I tried the update of Real Player plug-ins, re - install Real Player, install QuickTime, QuickTime plug-ins verification, etc. Nothing works.

  I have uninstall Realplayer and it works now. RealPlayer has been blocklisted by Flash.

• Why my system will not play "Avatar", the movie, and why he won't play a. MOV movie file smoothly?

  I don't know enough to provide more details.  I have a Canon camera, with all included software installed and a film I made that displays just fine on the camera and television, downloaded but will not play smoothly around a bit.  Brand new with Windows 7 computer.  It is what appears on the screen:

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy on the output display protection. Try to install a driver available for your video card.

  In fact I don't think I have a se video card.  I got 500GB of memory, 2, 4 GB of RAM, with a 3.6 GHZ processor.

  Thank you.

  Giaour

  Hi Giaour,

  Which version of QuickTime is installed on your computer?

  Apple Computer developed the QuickTime file format to create, edit, publish, and view multimedia files. QuickTime format can contain video, animation, graphics, 3D and virtual reality (VR) content. Only QuickTime files version 2.0 or earlier can be played in Windows Media Player. Later versions of QuickTime require the Apple QuickTime Player owner. For more information, visit the following Apple Web site:

  http://www.Apple.com/QuickTime

  More information refer to the following Microsoft article.

  Information on the types of media files that supports Windows Media Player

  Try the following and see if it helps.

  Method 1:

  I suggest to run the Windows Media Player settings Troubleshooter and check if it helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Method 2:

  This problem may occur if the resolution requested by the application is not possible by two display devices. Typically, this means that the application can request a resolution interlaced, but one of the two screens is unable to support the required screen resolution.

  Refer to the steps in the following Microsoft article.

  Windows Media Player cannot play this DVD because it is not possible to activate the analog copy protection

  Keep us updated on the status of the issue.

  I'm having fun not fast! I'm a fool. I downloaded an upgrade to 7.7.4 (I think) and it solved the problem of home videos. I still have to start the DVD player. Thank you much for the help. Giaour

• Why my laptop will not play store bought movies

  my windows media player will not play a dvd. It is said he cannot block put and I need to update my driver. It's a dell latitude 630 laptop with windows 7 ultimate opportunity

  my windows media player will not play a dvd. It is said he cannot block put and I need to update my driver. It's a dell latitude 630 laptop with windows 7 ultimate opportunity

  =======================================

  The free VLC Media Player may be
  worth a try... it will play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (the name of the file to download is: vlc - 2.0.3 - win32.exe)

  Good luck...

• Why a dvd will not play windows media center?

  Y at - it another program, I could play a dvd in windows 8? Media Center has played a few older videos, but will not play my current dvd.

  Hello

  Do you mean Media Center or Windows Media Player?

  Media Center is a supplement that you had to buy when it was available.

  If you mean that Media Player, read this information.

  8.1 Windows does not read the DVD.

  "" DVD for Windows 8.1 playback options."

  http://Windows.Microsoft.com/en-us/Windows/DVD-playback-help

  "Windows and Windows Pro 8.1 8.1 do not come with DVD movie playback capability. If you are running Windows 8.1 or 8.1 Windows Pro, you can search for a DVD player application in the Windows store (learn more about the Windows store). »

  _______________________________________________

  And Media Center is not available in Windows 10.

  "DVD for Windows 10 playback options."

  http://Windows.Microsoft.com/en-us/Windows/DVD-playback-help

  The app Windows DVD player is available free for a limited time to people upgrade to Windows 10 Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8 or 8.1 of Windows with Windows Media Center.

  Please note that Windows Media Center is not included in Windows 10 and are removed when you upgrade to Windows 10. Once the upgrade is complete, the Windows DVD player will automatically download to your PC.

  ______________________________________________

  In fact Microsoft has even stopped selling Media Center for 8.1.

  "Pack Pro Windows 8 and 8.1 and Media Pack are no longer available for purchase"

  https://support.Microsoft.com/en-us/KB/3107057

  ______________________________________________

  I suggest you look at using another media player to watch DVDs.

  http://www.SnapFiles.com/get/VideoLAN.html

  See you soon.

• DVD will not play on the computer.

  my computer crashed.  The computer files were all saved, but I can't find any programs.  For example, I can no longer play a dvd.  I have Windows Media Player, but it won't play the dvd from the library movie.  Also, when I go to computer/CDrom, the CDrom is empty.

  Thank you for your help.

  If it's a cd rom it will not play a dvd disc. Have you ever read a dvd on it? Is that what you did re - install Windows following the accident?

• Why my printer will not scan to my computer, the will says not connected

  My hp officejet 6310 all-in - one will not scan to my computer can someone please advise

  my printer is connected through USB, when I ran the check he told me to uninstall and re install which I did, but still does not work

• Online games will not play

  Hello

  I don't know if this is the right forum :) But I tried to play a game of trial and a game I bought at BigFish and all I get is a blue box. Manager tasks indicates their execution. I also bought Dream Chronicles (in a store) and installed, but all I can do is click play or the other options and nothing happens.

  I have no problem game Hellgate London.

  I am running Vista on a new Acer desktop computer. I have updated the drives and graphics activex works well, I entered in firewall and added games to pass by...

  Any ideas?

  Thank you!

  Hi silverkitty,
   
  You send messages in the appropriate forum. Am really sorry to hear that the games do not work.

  Try deleting the temporary files Internet Explorer
  1. open Internet Explorer
  2. click on tools and then click on delete browsing history.
  3. to delete the browsing history, click on delete all.
  4. Click to select also delete it files and settings stored by the modules check box and then click OK.
  5. click on the Security tab.
  6. click on restore all areas by default level, and then click OK.
   
  You can also perform scanning of the System File Checker.
  1. click on the Start button
  2. on the Start Menu, click all programs followed by accessories
  3. in the menu accessories, right-click on command line option
  4. in the drop-down menu that appears, click the "Run as Administrator" option.
  5. in the command prompt window, type: sfc/scannow then press enter
   
  Once its finished, restart the computer and check with the games, also try uninstalling and reinstalling the game and check what is happening.
  Please get back to us if you need more help
   
  Kind regards

  Niranjan | Microsoft Answers Support Engineer

• My game will not play when well even I have enough free virtual.

  My game won't play, said I need 3.0 MB of virtual memory, but my properties said I 21791 MB of free space available.

  Hi Ginnyst,

  Until solve us the problem, I need more information about the problem you are having,

  • This happens with all games or any particular?
  • Since when are you facing this problem?
  • You did changes to the computer before this problem started?
  • We also know the amount of RAM installed on the computer.

  However, you can check and try to change the virtual memory in managed system and check if it helps you to solve the problem.

  To set virtual memory to system managed size:
  a. click the Start button and access control panel
  b. click on system and Maintenance
  c. click System.
  d. in the left pane, click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  e. on the Advanced tab, under performance, click settings.
  f. click on the Advanced tab, and then under virtual memory, click on change.
  g. Select 'Size of system managed' and click on Set.
  h. click on apply and Ok.

  Restart the computer and check if the games work very well.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my movies on dvd will not play on my computer no more! What can I do to fix this?

  I had to recover my computer and everything went well. I played 1 of my dvd movies on my computer. Then I got a bunch of updates, and the next time I tried to play a dvd movie, it would not play! I need help do I need to do to solve my problem?

  Hello

   
  Are you able to read other DVDs on the computer?
   
  Method 1:
   
  Check out the following link.
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins
   
  Method 2:
   
  Try to play the DVD on another computer and check.