Why my lightroom does not find my file unless my camera card is in the card reader

Similar Questions

• Why 5 Lightroom does not appear in my applications CC?

  Why 5 Lightroom does not appear in my applications CC?

  Most likely you just ise an operating system not supported. We cannot really know. You did not provide relevant information.

  Mylenium

• Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

  Why pes 2012 does not work with me and my video card is 1699 MB Intel HD Graphics(core i3)?

  Hello

  You receive an error message?
  
  Method 1:
  You can update the drivers of graphics cards and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  Method 2:
  You can also perform a clean boot and check if it works:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article

  You can also check out the link:
  The problems of the game performance
  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
  Diagnose problems running DirectX
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

• Lightroom 5 not find import files

  Help, I don't know if I have a wrong setting, or Lightroom just became wobbly, but it won't find all the files to import.

  I brought three new jpgs in my file downloads and asked 5 LR import into the catalog and their management, as well as move to its permanent location on the hard drive.  Lightroom is indicating that it do not find file to import.  Windows Explorer shows them to be there.  I tried to find some photo files in other locations, and it does not find them.  Tried to restart Lightroom, without change.  I tried to restart Windows and then restarting Lightroom, without any change.

  You could also try to use right click Browse with bridge CC on the record of the genealogy and see if files are displayed and if the PS can open.

  It could be a permissions problem when you are not connected as a user on the computer?

• Lightroom does not recognize jpg files

  I use Lightroom CC 2015.1 Release

  I created a new catalog specifically for my new camera, a Sony RX100M4. I know the format RAW of the M4 is not yet supported, but I'm shooting RAW + JPG. I use the Sony PlayMemories software to import photos to a folder on my hard drive, then import photos from my hard drive in the Lightroom Catalog. The pictures are separated into folders by date. Initially, I tried selecting the main RX100M4 import the folder and selecting "Include subfolders", but after verification by the imported photos a lot were missing. So next I tried select folder to a particular date, and I realized that Lightroom does not even see the jpg files. If you see the picture, you can clearly see that on my hard drive there are 8 files in this folder, the FIRST 4 and 4 jpg. Lightroom is only to see the RAW files. Does anyone know a fix for this? Maybe I am doing something wrong.

  Thank you!

  

  Lightroom knows there is. ARW files in the folder but cannot import or even show previews; I don't mind not even display jpg files because you ignore the jpgs beside RAW photos. https://helpx.Adobe.com/Lightroom/help/file-import-formats-settings.html

  Furthermore, I don't think that you need a separate catalog for these photos, I think a single catalog for all the photos is a better solution (and less work) and the photos of this new camera can be easily separated if you wish.

• Why my lightroom does not export the edited versions of my pictures?

  I edit all my photos in lightroom and it worked for me in the past. Recently, something happened with my computer, I decided to save my photos on a disk outside, just in case my computer does not turn in a single day. I saved the catalog to my hard drive, it was wrong to me? When I opened first lightroom after it backs up it said something about 'do not find the catalogue' so I just hit well and saw that all my photos were always there so everything was OK. But now that since my lightroom exports only the originals of the pictures, even if I change the photo. I have not found someone with the same problem and I'm really at a loss at what to do. Someone please help. I have wedding photos that are supposed to be done for someone soon so I really need this fixed a problem.

  I got really the problem right after I posted this. I could have sworn that I deleted my question. Thanks in any case!

• I get the message 'c:\users\AppData\Local\Temp\7zS448\Setup does not find this file"while trying to install the printer driver

  Original title: \users\AppData\Local\Temp\7zS448\Setup

  I get the message, "cannot find this file" it displays the file in the tool bar, c:\users\AppData\Local\Temp\7zS448\Setup. This happens when I try to install the driver for my HP PhotosmartC3150 on my laptop HP Pavilion with Windows 7. When I click ok, the installation stops. Doesw anyone have suggestions?

  Thank you.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  Method 1:

  Unnecessary files on your hard drive, disk space and can slow down your computer. Disk Cleanup removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  Delete files using disk cleanup

  Try to install the driver now.

  Method 2:

  Step 1: Clean boot

  Put the clean boot computer and try to install the driver.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 3 in the article by putting your computer to normal startup.

  Step 2:

  You can download the drivers in the article below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1146516&prodTypeId=18972&prodSeriesId=1146511&swLang=8&TaskID=135&swEnvOID=4063

  Method 3:

  If you are unable to install the driver, I suggest you to run the Fixit provided prior to installation.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  Hope this information helps. Please reply with the status so that we can help you.

• Why my mac does not recognize my hard drive or SD cards?

  I got a new Macbook Air last month. Since I had so much problems with it - mostly because if you plug in anything whatever in the SD card slot or USB drives, it does not recognize them. I own a mac before, as well as PC laptop dell, so I am aware of the problems when formatting the discs everywhere, but even when I plugged a new passport hard drive, the computer couldn't find. Similarly, you may not find all the SD cards when I tried to use the SD card.

  What is going with this? I am a photographer living, so I need constant access to these two. This new model has some new method for transfer of files from the external hard drive etc.?

  Close, then connect the mac to a power adapter, disconnect all external devices.

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  reset all external then pulls even deleted

  Once you open a session reconnect the external hard drive

  If the drive is connected with a hub of party 3rd do not use it and connect the drive directly to the mac

  Connect the external hard drive and open Macintosh HD/Applications/Utilities/Disk Utility disk utility

  The drive appears in the list of external devices?

  

• Recently, Firefox does not display PDF files. It acts like it loads the PDF file, but there is nothing there but the "program" that the document should be presented in.

  This started with 20 Firefox and persists with Firefox 21. It's never happened before. Everything is up-to-date. However, PDFs don't appear. Sometimes I see the bar indicating a load of progression and sometimes it of just the normal program PDF background, but no matter, he does not appear. What is happening with this?

  Moreover, I will eventually switch to Chrome to view the PDF file as I can't make them work in Firefox.

  Thank you very much. That seems to work. What a shame the preview version of Firefox is not longer functional!

• Why 6 Lightroom does not matter the keywords in the XMP from previous versions?

  In previous versions of LR from Lightroom (1, Lightroom 2 and, above all, Lightroom 3, 4 and 5 of Lightroom Lightroom) I made sure that my changes are written to the XMP file on and images.

  This allows me to receive a file froms someone else generally, or send one of my files to someone else and the changes, keywords, etc. will be in the DNG file.

  When you import an image (or a folder of images) a disk hard having keywords in the XMP of DNG file, these keywords are lost when importing to Lightroom 6.

  If I export as catalog from an earlier version, and then import into the catalog Lightroom 6, key words are there.

  But the point with XMP should be that changes and keywords are in the file and is not lost.

  So why not Lightroom 6 see and import them?

  I imported a file and supposed to apply any metadata during import (which contains only Copyright information).  This has actually imported stars, colours, changes, IPTC, keywords, EXIF as it should.

  Rely on the observation of mcucinat, the preset selected metadata to apply when importing is clearing the fields.  Make sure that you don't have a check mark next to one of the fields in the preset:

  

  

  A common mistake is to have the check mark on an empty field - which will Erase the field when you import the pic.

• Lightroom does not recognize cr2 files or any type of RAW files

  I ve used Lightroom for years to import and manage my - images raw and never had a problem until a few weeks ago. Now I can only import JPEG files to Lightroom. When I try to import files from other file types simply go gray and I can´t select them. Se the screenshot below, it is the case with all types of RAW files. I have a Canon 60 d and a Sony A5000.

  

  This is the culprit:

  

  and here:

  .

  Looking at all the images but allows only new import. Look at only the nine. LR is good enough to detect the photos that are in the database and do not need to import again. But you can do it by unchecking the mark near "will be important...". »

• 2015.4 Lightroom does not solve my files incorrectly identified as Zeiss Milvus 1.4/50 ZE (should be the Sigma 50 mm f/1.4 Art)

  So I have all these files that I've taken with the Sigma 50 mm f/1.4 Art think LR were taken with the Mivus Zeiss 50. I was hoping that the update should fix but apparently not. If I select a file and click on metadata > read metadata from the file, then it will simply update it to "50mm" but it resets all my editing. What type of solution is it? What now? I want these files already taken to be labeled correctly, but I don't want to lose the changes.  Thank you.

  Ok. I didn't know that you were working in the library module.

  "50mm" is the tag EXIF lens written by the camera for the SIGMA and the Zeiss 50 mm f/1.4 lenses. Usually, we leave these data EXIF alone unless a manufacturer of lenses she asks be overridden. This is the case with the Zeiss Milvus glasses.

  The original bug is fixed (i.e. you will not see this with newly imported or non edited images), but as you have discovered, after making a change to an image in LR, the lens name is committed to the change data image in LR, until you recover the changes to the image. The reason why you lose your changes when you choose to read the metadata of the file are because LR is crush the image change the data in the catalogue with the xmp disk data. In this case, it is probably not a sidecar xmp LR replaces the current changes with what is essentially an empty file. It is similar to hit Reset in the develop module.

  There is a way to manage this scenario (retroactively setting the name of the goal), but it will require changes in the code and will be available in the next version of LR. Unfortunately I don't have a timeline on when this will be. I follow on this thread once I am sure that this issue has been addressed.

• openScript and jfsl openDocument does not find a file while there are

  I have C:\flash\FlashApplication1\FlashApplication1\FlashApplication1.as

  package {}
  
  import flash.display. *;
  
  SerializableAttribute public class FlashApplication1 extends MovieClip {}
  
  public void FlashApplication1() {}
  Super();
  }
  }
  }

  and C:\flash\FlashApplication1\FlashApplication1\bin\Debug\FlashApplication1.jsfl

  var uri = "file:///C:/flash/FlashApplication1/FlashApplication1/FlashApplication1.as";
  var swf = uri.substr (0, uri.length - 4) + ".swf";
  var target = "file:///C:/flash/FlashApplication1/FlashApplication1/bin/Debug/FlashApplication1.swf";
  var doc = fl.openDocument (uri);
  fl.compilerErrors.clear ();
  doc. Publish();
  If (FLfile.exists (swf)) {}
  If (FLfile.exists (target)) {}
  FLfile.remove (target);
  }
  FLfile.copy (swf, target);
  FLfile.remove (swf);
  }
  fl.compilerErrors.save ("queue: / / / C:/flash/FlashApplication1/FlashApplication1/bin/Debug/Fl ashApplication1.err'");
  FLfile.write ("file: / / / C:/flash/FlashApplication1/FlashApplication1/bin/Debug/FlashApplica tion1.amethyst', 'done'");

  
  When you run jfsl in flash command run it says it can't find file:///C:/flash/FlashApplication1/FlashApplication1/FlashApplication1.as on the 7 line (var doc = fl.openDocument (uri);) while there is at this location. Do you see why and how to remedy?

  I looked at the official doc on openDocument
  http://help.Adobe.com/en_US/Flash/10.0_ExtendingFlash/WS5b3ccc516d4fbf351e63e3d118a9024f3f-7b97.html

  It shows a weird path syntax:

  var doc = fl.openDocument("file:///c|/Document.fla");

  I tried to use file:///c| instead of file:///c: but it didn't work either.

  I also tried openScript, and it didn't work either too.

  put a test file on the root of c and access.  Then put the test file in c:\flash.  then in c:\flash\FlashApplication1 etc.

• Why flash player does not create these files?

  IME12, IMJP8_1, IMJP9_0, IMJP12 created by:

  C:\%userprofile%\AppData\Local\Microsoft

  C:\%userprofile%\AppData\LocalLow\Microsoft

  C:\%userprofile%\AppData\Roaming\Microsoft

  Anyone know why it is necessary for flash player create these files?

  This is with Firefox... IE doesn't do this.

  

  

  the last 2 versions have deleted this question.

  Thanks for taking care of this.

  Chris

• Bitmap.getBitmapResource (...) does not find my file?

  Hi all, I'm a 1st year student at the University of Warwick (United Kingdom) and I'm writing a small application for the Blackberry Storm, but I can't get my code to use just...

  Bitmap image = Bitmap.getBitmapResource ("c.gif");

  BitmapField bField = new BitmapField (image, BitmapField.FOCUSABLE);

  Add (bField);

  if(image == null) {Add (new RichTextField ("zero!")) ;}

  ^^ the snippet above is what I wrote, as far as I can see it is all very well, and the c.gif file is in the same directory as the source .java code when I Isaiah to compile the project (in the RIM JDE)

  When I run my app in the Simulator, rather than the displayed image, I just get "null!" printed...

  I don't know I'm just something dumb/obvious but I tried to move the .gif to different folders, but I can't make it work

  Thanks for reading this,

  Harri

  You have added the file to the project?