Why my mouse move when entering?

Similar Questions

• Cursor moves when entering text

  I am usuing editing field, but when I type any text in this field, then cursor does not move with the text, it's show into typed text, but the position of the cursor is on start.

  I use 6 Os and Os 7/7.1.

  Please let me know for the problem.

  Hi simon,.

  I found the solution for it, I change the cursor by using code in the following onFocus and onUnFocus methods:

  setCursorPosition (getText () .length ())

  Invalidate();

  Return super.onFocus (branch); For the onfocus method

  Return super.onUnFocus (); Method onunfocus

• When I put the PC in each Stand By, or Hibernate the PC often comes back to life his own, without my mouse movement

  original title: problems with Stand By and Hibernate

  I have a desktop Compaq 6140EA with BIOS current under XP SP3 (updated) and all driver updates applied.  When I put the PC in each Stand By or Hibernate the PC often comes back to life on its own, without my mouse movement / hit a key (Stand By) or touch the power button (Hibernate).  I have reset the BIOS to default settings. no improvement.  I've selected all the power management always we and tried the ACPI fixed feature off installation and power button / stop.  No improvement.    The problem seems to occur less if I turned off my modem broadband Ethernet connected before entering Stand By / Hibernate.

  I wonder if I got bad wake-on-LAN and if so, how to disable it?

  Thanks, but I already did those things.  But I seem to have found the answer: I pointed out that the problem seems to be related to the modem broadband.  I found KB/810719 related to this issue.  I followed the instructions: in Device Manager / network adapters / properties / power management check only allow management Stations to bring the computer from sleep mode.  That fixed it.

• Why the mouse does not disappear when captions are turned off?

  Hello!

  My owner like apparently not captions when I record my demonstrations, so I have disabled this option when I capture from my demo. However, I discovered that my mouse movement does not capture when the subtitles are disabled, which means that I have to activate the mouse for each slide. It's more annoying than catastrophic, but no one knows why this is happening and how can I prevent? I checked that "capture the mouse" is selected in the recording preferences. I even turned off and back on, nothing works. Is this a bug or user error? (I'm leaning towards option B).

  Thank you!

  Krista

  Hello

  I am at a total loss to explain why it happens. Have not really noticed myself.

  However, I might be able to ease the pain a little.

  I'm not sure it will work, but it can. After you save, select all of the slides in Storyboard mode or in the film. Then activate the mouse for each of them at a time. This part should work. I'm not sure, what if the movements of the mouse will be selected on registration. It may end up when the mouse is there, but you need to reset the coordinates for each slide. Ick!

  In this case, you could take a different point of view.

  Export captions as a Word document. Change the Word document and delete all the text in the legend. Then import them into empty on all of the legends. Then mount a legend and configure it as a transparent. The apply to all allows you to configure all the other legends in this way. It would still be there, but would be invisible. Can be less painful that way.

  Be sure to report the problem of mouse as a bug! The link is in my sig line.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• Chess Titans why are my moves in Chess Titans not saved on exit on my PC, when this function is OK on my laptop

  original title: Chess Titans

  Why are my moves in Chess Titans not saved to the output on my PC when this function is OK on my laptop?

  Assuming you are using Windows 7, Chess Titans, click the game , and then Options. Now, make sure the box labeled always save the game at the output is checked.

  There is also a box always continue saved games that you can check the box.

• the mouse movement is not displayed when you preview the project and after publication

  I missed a step when you change a demo of simulation? Here's the problem:

  When I edit in the timeline of a slide, I can move the appearance of the mouse movement and change the length of its duration; I can click on "show/hide elements" for the mouse, the text caption and select box to show or hide in the slide.

  All the changes reflect in preview > play Slide. But in preview > project or preview > in the browser or publish it to any format, except for the presence has changed and the duration of the movement of the mouse shows, others seem out of my control: 1) no mouse movement; (2) the pointer still displays its final position on the slide since the beginning of the slide; (3) the hidden nail box appears.

  That's happened?

  I come off some defect? Where is it?

  Thank you!

  Your question is not quite clear to me, but this sentence "I can click on" show/hide elements "for the mouse, the text caption and select box to show or hide the slide." is ring a Bell! Have you used the "eye" icon in the timeline panel to "hide" the objects? That is not intended to hide the version published, only to temporarily hide for editing purposes, have has too many objects on the slide. If you really want to hide an object permanently, so it does not appear after the publication or during a preview (play Slide is not a preview, is also only for editing, synchronization) you must use the 'other' "eye" icon you will find at the top left of the properties of this object Panel. Quite confusing to have twice the same button to completely different purpose (there is even a third version in Drag Drop & who still has another feature, just hide the links in the D & D).

• Display a different message when the mouse move to certain instance of button

  I use AS2 and I want to do is display message of introduction 6 differenht everytime my mouse move on button 6 respectively (named as btn1 at btn6), what do I do? I'm newbie in flash.

  My idea is to code as2 under each key and whenever mouse, then call clip movie at certain place, every sentence.

  Any help is welcome, I'm currently quite confusing on this problem.

  Your idea should work perfectly and is how some would approach it.

  Another approach would be to just the part of the text of the State above the buttons.  This way you shouldn't have any code to display text as the button symbols have their States included with them.

• Running win XP pro sp2 mouse moves, but everything else does not

  Running win XP pro sp2 mouse moves, but everything else does not respond after a certain time. Just started doing this last month. Had Xp for several years without ANY problems at all.

  Hi BobM202,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3. do you have security software installed on the computer?

  4. are you referring to freezing except office mouse movement?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• screen suddenly moves when I move the object

  I'm on a Mac Pro 2009 w / 2 hard drives and graphics card updated, OS 10.9.3, with Apple keyboard and Apple mouse. Monitor Dell, two years old. I use Adobe Creative Cloud membership.

  Why my screen moves horizontally and vertically, while the zoom out, when I move objects in Illustrator.

  I thought it might be parameters of the mouse or the keyboard, but I changed the settings several times and tried other mice, as well as Illustrator Prefs changed several times.

  Any suggestions are welcome.

  Thank you.

  Nothing is checked for accessibility, but I think that the Hot Fix for AI 17.1.0 (Mac), that he fixed. Thank you.

• Very slow ARD mouse movements

  When checking my jobs local (same LAN) in ARD in macOS Sierra the mouse movement is very slow, are not smooth at all and the STI jumping cursor.

  This was never the case with ARD in the previous versions of OS X as El Capitan. I use the exact same settings and configuration. Control ARD clients so got very boring now under Sierra.

  Any ideas or others facing the same behavior?

  Thanks for your comments.

  I'm really the only one having trouble with the mouse under ARD here?

  I have a LAN local 1GbE very significant without bottleneck and change the color in ARD in black and white Mode has no influence at all for the risk mouse movement.

• After installing the runtime Visa my mouse moves with COM data

  I'm sorry, I don't know anything about Labview I use prepared GUIs.

  After installing the runtime Visa540 my mouse moves whenever I get the COM1 data. How can I turn that off?

  You use a USB-serial adapter?  Has been sending peripheral data when you start the computer to the top?  The device sending the data while the USB adapter has been being connected?

  It's probably a Windows problem.  If you connect a serial device (adapter USB-serial anytime or a build/PCI serial port at startup) and the device sends data, then Windows think that standard equipment is a mouse.

• How can I disable the mouse pad when you use a mouse plug-and-play?

  How can I disable the mouse pad when you use a mouse plug-and-play? I tried to disable the driver, and nothing works.

  Hello

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The mouse moves!

  Why my mouse moving on the screen when no one is in contact with her?

  Probable reason is that you can "Enhance pointer precision" enabled in the properties of the mouse. Look under the "Pointer Options" tab and uncheck the box.

• can you tell me why the mouse on my laptop has stopped working?

  Can you tell me why my mouse stopped working and how to make it work again. Thank you

  If it is the synaptics mouse device you have installed there are a lot of questions similar to yours... I had a wireless mouse at the end of the account and use that now that I could not fix the problem... but... you accidentally pressed the FN and F7 as that often disables the device! (depending on the machine)

  Go to the hardware and peripheral control panel... and you should see several options under devices and printers... mouse option should be there... enter this option and see if you can solve the problem... good luck.