Why my mp4 exported file look so bad when it is viewed in an adobe acrobat pdf file?

Similar Questions

• PE 9 - Why is my exported file as the source?

  Hello

  I am new to Adobe first Elements 9. I have a digital video recorder connected to my TV. It produces MPEG - 2 TS VIDEO files. I want to import into PE9 and comes to cut the ads.

  I tried with a source file that is 1 GB in size. I have imported and removed the ads, but when I export using the share of > computer and select settings that mimic the source I stll end with a 3.7 GB file. I thought that it should be smaller than 1 GB because video is now about 5 minutes shorter.

  I chose my export settings:

  Multiplexer: TS

  Audio: Left that it intact

  Video:

  Video basic settings:

  Quality = 4

  Everything else set to automatic (depending on source)

  Go to maximum depth, do not

  Flow settings:

  Encoding: VBR, 1 Pass

  Bitrate - Custom level

  The Target, min and Max value every 15

  GOP settings:

  M frames: 3

  N frames: 12

  Is my better DVR to the video encoding/compression PE9 or my export put evil? The exported file should not be less than 1 GB?

  As Steve, there are two parameters that affect the size of the file:

  Duration

  Bitrate

  With a fixed term, the only way to adjust the size of the file is to reduce the bit rate (Bit-rate = size of reduced file, but at the expense of quality.

  Now, some CODECS will use a flow rate lower, but all while maintaining the quality perceived, better than others, but it is still the bitrate, which affects the size of the file.

  Some options to export/CODEC will list the flow directly and MB/s, where others instead have a 'quality' setting, and MB/s bit rate will not be shown directly, but will focus on some parameters of quality.

  An important consideration is what needs to be done with the output file. If it must be used for additional editing, then I think that the file size is not a big problem, as I hear the ultimate quality. If we keep to the output file, then there are several considerations, the platform of the computer of the recipient, the drive, the necessary quality of the file.

  Good luck

  Hunt

• photos look different (bad) when placed in InDesign CS4

  I have a problem because my photos look frowned upon in InDesign. I work on my photos, until they look perfect in Photoshop - with just the right color balance and tone - but when I put in ID, they look much darker and more red or saturated. Then I look in Photoshop again, and they look very good. What gives? A program that shows the actual status of the photo? BTW, the pictures are using the same color profile in the two programs and the monitor is unchanged b & w viewings.

  I wonder if anyone has had a similar experience and what I can do about it? It makes me very nervous to see my pictures looking so bad in InDesign, where I prepare my layouts for offset printing. They will print as I see them in Photoshop or they will print as I see them in InDesign (which is terrible)? At this point, I am reluctant to make other adjustments and hoping that it is the view of Photoshop which is correct.

  But why is it happening in the first place? Is there a setting I should be fixing? Or is there an issue or incompatibility black and white Photoshop and InDesign color I know of?

  I use ID and Photoshop CS4 on Mac OS x 10.4.11

  Hope someone out there can help me with this problem.

  Thanks in advance!

  Scarlett

  In Indesign all that you see is an overview of your images, it is a proxy of low quality, used only for the purposes of the layout.

  However, you can get a better overview by choosing View-> display-> display high quality performance. But it is still not as good as what you see in photoshop. Do not despair. As long as you have not all the missing links or changed in your links palette, your images will be printed as you see them in PS (or as close as you can get).

• Try to download Adobe Acrobat PDF 11. I wonder what file to download on. Nothing works.

  Try to download Adobe Acrobat 11 AM PDFs. asked where to download on. Each folder that I recommend is rejected. All boards

  Ivan please choose the default location of your user directory to download the installation files.  Once the software is downloaded, you can then install in your program files/Applications folder depending on your operating system.

• PDF imported in InDeisng looks really bad when printing

  It s completely destroyed. It seems all the block. Please see here, like I'm shit to explain. The original document was scanned from a Sharp MXC-311. It seems during the analysis of another machine (Sharp MXC-5001). I think it's something wrong with the way InDesign handles pdf, any ideas that might help?

  dapeel wrote:

  ... The original document was scanned from a Sharp MXC-311. During the analysis of another machine (Sharp MXC-5001) it seems...

  That looks more like a bad scan for me. What looks like the scanned in Acrobat Reader? There is nothing about the way ID manages PDF that would cause a good image to get scrambled.

• Why are my columns in the table narrower when living as view creation!

  Hi guys

  It's seriously making me crazy.
  If you scroll to the bottom of this page, you will see buttons description option and buy are crushed until the right part.

  They do not look like this in Design view if and I do not see how or what to change.
  http://preciousparcels.co.UK/baby.html

  Thanks in advance

  NAT x

  It is an easy fix if you nest just lines in the problem area in their own table.

  Insert below the last line of the suspended hearts order form (line 388)

           

  
  

  Put an end to this table nested 684 line just above the end current table

   

  

• message from Homeless trying to open a file in Adobe Acrobat?

  When I try to open an Adobe Acrobat file, I get a message 'homeless' and it does not open.

  Go to start / / Default programs / associate a file or Protocol with a program / and highlight the file type that you want to open (and what this file type?).  What is the default program to open this type of file and which is the program suitable for use.  If this is not the case, click on edit and see if the correct program is listed.  If not, click Browse and locate the executable file for defaullt program program, it is recommended to use, select that and replace the default for that file type.  Now, these types of files will be opened with the specified default program.

  Remember, you can not read/open a file sent to you, simply because it was sent.  What email program are you using (name and version) and you can download and open other files without problems?  You need a program on your computer to open this type of file, and must be associated with this type of file as shown above.

  I don't know what it means "a message from homeless.  Please post the EXACT Word for Word error message.

  If you get this program by e-mail, copy the file to your desktop and see if you can open it from there.  If not, open the program that is supposed to be able to open that file type and click on File / Open and navigate to the file on the desktop and try opening it from within the program.

  I hope this helps.  If this is not the case, just reply answers to all the questions above.  We need your help to be able to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Just downloaded things - I had Adobe Acrobat files, and now I wish I could edit them directly to new - what should I do?

  I have converted the Word documents. for Adobe Acrobat PDF files - I just want to be able to work on them directly and editing the manuscript directly using the TOOLS - how can I do this?

  No, no, no, don't think even to do. PDF files is not Word documents and Acrobat is not Word. It is painful and disastrous.

  What everybody does is simply change the Word document and make a new PDF each time.

  The edition in PDF format's desperate last resort when the originals are lost and backups eaten by termites.

• Why my export files are too big?

  When I try to make a video that I did (was a sound wave of music) and when I put a narrative that the exported file was too big and when he didn't know it was a time very short. What should I do to make my videos to smaller 1890p in size?

  Thank you.

  FAQ: Why my huge output file, and why didn't he play back smoothly in a media player?

• Why the Photoshop in Lightroom export file downgrade the size of the original when I reimport

  Why the export file to Photoshop and re-import in Lightroom downgrade the size of the original

  I export my raw 24 MB for Photoshop file
  It creates a file of 80 MB tiff (aprox)... Ok

  

  When I do a "Save as" file directly in an external file, I always have a 80 MB file

  

  But when I save the tiff from Photoshop file directly in Lightroom the downgrade from 14 MB file !

  

  
  Is this a problem of the actual display metadata?
  Because when I search the TIFF of the changes, it isn't always to 85 MB 14, 3 MB?

  

  I check each preferences everythings seems to be good

  Please I need help

  The info so that the image does not appear the size in megabytes of the image, but rather the number of megapixels. Megapixels do not directly translate to the size of the file. Right-click on the image and choose to display the image in the Explorer or Finder, depending on your operating system. Then you can see how big the file is in reality.

• I can't export my files (raw, jpg, tiff, any). always a notification "the path of the exported file cannot contain special symbol '='. ' is displayed. Why? I don't know what is the path to the file. at least, file name is not special symbol.

  I can't export my files (raw, jpg, tiff, any). always a notification "the path of the exported file cannot contain special symbol '='. ' is displayed. Why? I don't know what is the path to the file. at least, file name is not special symbol.

  The path of the file is the full description where the file is located in the language of the operating system, including drive, directory and file name and extension.

  

  In the above example, the file path combines the two circled items-"E:\Webpix" and "BleedingHeart.JPG", the path to the file would be "E:\Webpix\BleedingHeart.JPG".  If you do not have an equal sign in the name of the file, you must have one in the folder or the equivalent.

• Why an export file 2Mo ends as an export of 12 MB?

  Hi, see screen shot of my export preset Pleas. The exported files with this Dungeon preset on my desk in the form of files 12 MB - their original size.

  And how to export as png file?

  Thank you very much.

  

  Note, Raphael, of your screenshot above, ask photo 2 megapixel, in other words, you want Lightroom to shrink the size of the image at the bottom of what it was originally much smaller, resulting in a loss of quality.

  Do not confuse MegaPixels with megabytes. These are not the same things. One does not imply the other. You did not a picture of 2 megabytes of Lightroom, even if it sounds like that's what you want. And as stated, no software can provide a specific file size PSD file.

• Why open after export of the files from lightroom photoshop elements?

  Whenever I have export files in lightroom 6, photoshoped items opens.  How can I keep this from happening automatically... I don't want to change the files in the elements.

  Hi woodmaker,.

  Could you please let me know which option is selected in the export dialog to the title of "Post processing".

  Please change accordingly.

  Kind regards

  Tanuj

• looking for level zero export file location

  Hello guys,.
  
  I am taken to a level zero export my application and rename the file and save... Can someone guide me on the location where it is saved.
  Because I try to load it from environmental assessments again whenevr enforcement it only shows me the file I saved.
  
  Where he then saves the level 0 export file? Please guide.

  I think that I found...

  Sound: \Application D:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\app...

• Why exported file rises unalterable in Adobe Acrobat 9 pro?

  Hello. Would appreciate any help anyone can give me. I spent the last two weeks of work on a scientific poster for my brother, who is a doctor. I did work at Adobe.com and came to the realization that I wasn't going to be able to save outside the program, since it is a trial.

  
  

  However, I came across the Export command and exported in Adobe Acrobat 9 Pro. Only problem is now a read-only file. I can't handle the text. The poster will be about 3' X 3' and now it has been formatted for 8 pages 1/2 "X 11". I think that people Fed Ex will need editing power.

  
  

  So, anyone know if I can change this document to edit? Tried to record on a USB key, but that no longer works.

  
  

  (Please help me! This Adobe site is so complicated, it's driving me crazy!)

  
  

  Thank you!

  
  

  Beth

  What application you use. Export is not an option in Acrobat, but it is typical of a lot of software packages that create PDF files. Ownership of the PDF file as a text or a graph as mentioned graffiti is an important part of this issue. The service you use apparently will probably charge an arm and a leg for any changes.