Why my photo thumbnail appears darker than the original photo?

Similar Questions

• Why some thumbnails appear dark, although the photo itself is correctly exposed. When enlarged to full screen with the SPACEBAR or open in Photoshop, exposure returns to the correct appearance.

  Why some thumbnails appear dark, although the photo itself is correctly exposed. When enlarged to full screen with the SPACEBAR or open in Photoshop, exposure returns to the correct appearance.

  «Click on the image and click on "clear cache for selection".»

  Try this out and let us know if this helps

• Lightroom displays files and exports darker than the original or Photoshop files

  Hi all.

  Let me first preface this by saying I'm not technical interest, and I know nothing (or very little) of CHF etc. profiles.

  But suppose a person will try to tell me to do something with them in a really technical way that I don't understand, please treat me like a child of 4 years in this regard.

  I use Lightroom 5.6 on a Mac under 10.9.4 I Photoshop CS6 and fitted with a calibration Spyder 3pro device and all the Adobe programs linked to the exit of calibration to ensure 'if all is well' quality control.

  I recently was analog film scanning and this import in Lightroom 5. I noticed that the file import always seems darker than the original.

  When I exported from Lightroom, them they look like shit.

  There were no imports of additional parameters because they are all extinct. I did when I installed LR.

  I also noticed that whenever I imported a Raw file for some reason, on the original file would look great for a second then when clicked would change to something less attractive. But I digress.

  So try to show what's happening. I created some images to illustrate my problem.

  Also, it doesn't matter if I turn the proofing or disable.

  Lightroom Softproof on

  

  Lightroom Softproof off

  

  Vs Lightroom Photoshop histogram - very similar

  

  Left: file opened from Lightroom as the Original right: original Photoshop file

  

  Left: file open an export from Lightroom right: original Photoshop file

  

  Clues because it is very annoying and yet 5 Lightroom unusable.

  These files are probably in grayscale without an included icc profile. Photoshop, using the parameters that show you will pay 15% dot gain profile. Lightroom assumes the sRGB which is much more mixed. You can see this difference in the massively different histograms. What you need to do is save the file from Photoshop with included icc profile. Lightroom should display the same.

  Note a bug of color management nasty exist in Lightroom on Mavericks in the Panel to develop: Jao photo blog: quantification of the problem of management of the Mavericks color also which make the deep shadows Cap upward.

• copies are darker than the original. Please give address where I can show it. I showed it to y

  Deskjet HP 1050 printer. SR No.14232 YMO

  Windows XP operating system

  Copies are darker than the original, and the whites are a light gray shadow

  Any changes made to the printer

  • Try to do a power drain
  • If this does not work, uninstall and reinstall the software of the printer control panel

• Cut in darker than the original box?

  I'll explain what I'm doing. I have a series of photos that are very similar and they have a point

  in the lower corner. I deleted the item from the bottom and put another element

  Now I want to remove the first element from the rest of the pictures and replace them with the item which

  I added in the first image.  I did on other occasions without problem. It took me almost

  thirty minutes or more to make the first photo. (I'm a beginner)  And everything I have Photoshop CS3.

  I really want to spend half an hour on each photo. I saved the first picture I did in .png

  format.  I loaded the first photo that I made and used the rectangle tool to cut the angle with the

  good article in it.  Then, I loaded the second image and pasted at the contour of the element.  Now I have the second

  image layer on the bottom and the cutting of the layer on top. I've done other procedures like cut the

  the area on the background layer corresponding to the upper layer.  Anyway, you can see the area of the added portion

  because it is darker and you can see the outline of the rectangle tool cutting. I know it's a long question

  but I'll try to explain it then it will be clear.  I've done it before, and couldn't see it.

  The photos were all taken at the same time. And I've tried other tools in addition to the rectangular selection tool

  with the same results.  Thank you for any help or advice.

  Please post screenshots (or for example it published and one unpublished images) to illustrate what you're trying to verbalize them.

  Why png?

  Have you tried to place the complete modified image in another image, which apply a gentle layer mask and the cutting of an adjustment layer masking to solve problems of brightness?

• Top of the screen darker than the background

  It seems to only be visible on a completely blank page with brightness as low as possible, but I noticed the top of my screen Moto X is never so much darker than the lower part. Initially, I thought that some applications use some background gradients, but test with a white screen, I have confirmed it is not the case.

  Should I return it? It's an artifact of something on the phone? :/

  If it is too hard to notice as you say, I think that it is not a question of device. However, only you can determine if it is quite disturbing to replace/repair. There is probably no device so perfect that he didn't have a tiny but real Variant that someone would find it impossible to bear.

• How to make text appear darker on the screen?

  The text on the screen is gray.  Here the words to find more dark & appear more clearly on the white background.

  Hello

  From your problem description, I understand that you want to customize the display settings so that the text should appear darker on the screen.

  What is the brand and model of your monitor and your computer?

  We cannot change the font color of desktop. They are dynamic and show white on dark background and change in white with a shadow effect black on a light background.

  I suggest you refer to the suggestions below and check it it helps.

  Method 1:

  a. type click Calibrate display color, in the search box and press press Windows key + W (it will be charming setting pop-up Windows 8), Enter.

  b. calibration color screen, click Next to continue.

  c. follow the instructions on the screen and check if it improves the display of your monitor.

  Method 2: I suggest you to refer to the manual of the monitor and adjust the brightness, the contrast of different values.

  Also check out this link:
  Get the best display on your monitor

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope the above information is helpful.

• Anyone know why fonts be suddenly appear down to the bottom of the box unless I actually scroll the menu and leave it highlighted?

  Anyone know why fonts be suddenly appear down to the bottom of the box unless I actually scroll the menu and leave it highlighted?

  darlagore,

  I think that it can fix:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

• Inspiron - left side of the screen is darker than the right

  I have a Dell Inspiron E1505, and it is difficult to distinguish the left side of the screen since it is significantly darker than the right side. I played with the birghtness parameters, but the effect remains even at the highest. Any help to fix this would be greatly appreciated. Thank you.

  Message edited by knickerbocker23 on 04/05/2008 19:19
  Message edited by knickerbocker23 on 04/05/2008 19:19
  
  

• "this computer's hard drive is smaller than the original hard drive shipped.

  Computer model: p7-1058uk Hi, I'm trying to reinstall my windows recovery kit 7 I bought from best2serve my OCZ Vertex 60 GB ssd Series 3. But I get this error message "this computer's hard drive is smaller than the original supplied hard disk. The recovery process cannot continue"I actually managed to install this recovery on the same front drive kit when I bought first. Any ideas as to why its not working now? I have formatted the ssd drive, deleted the partition and creates a new one with a program called gparted. I can't access my computer until I can reinstall this recovery again kit. Thank you

  Hello:

  I'm surprised that the same recovery disks set worked the first time.  Unfortunately, the error you are getting is the norm. I don't know any solution other than to get a bigger hard drive to the approximate size as the original.

  I have a solution for you if you want to use...

  If you can read the product key 25 character Windows 7 on the sticker COST Microsoft on your PC, you can download single files Windows 7 ISO to burn it to a DVD for the version of windows (Pro, home) that is installed on your PC, and which is listed on the sticker COST Microsoft on the PC.

  You must also select the language installation provided with your PC, or the product key will not work.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program.

  Use the 25-character product key to activate the installation. It's good for the 32-bit or 64-bit version of W7.

  Then go to the support page and drivers for your PC install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• slower and later than the original videos

  I put a video in After Effects CS6 and I did nothing to edit it.  I made the video and the video was slower and later than the original.  How can I increase the quality of my videos?  Thank you!!!

  FAQ: Why my huge output file, and why not playing smoothly?

• is the new Apple Watch series1have the same S1 processor than the original

  Is the new Apple Watch series1 have the same S1 processor than the original?

  Hello

  The Apple Watch series 1 has a new processor dual-core S1P and GPU, which is up to 50% faster than the original Apple Watch.

• Split larger than the Original file

  I have a big document of 900 pages. Its size is 20 MB. I divide it into two files of 450 pages each by using the command Split Document in Acrobat 9.1.0. The two files were each larger thant and the original document. They were 30 MB each. I then tried to create two separate documents by removing the last 450 pages in the original document using the command delete Pages and saving it as a new file. I did the same thing with the first 450 pages. Both files were 7 MB each. Together, they are much smaller than the original file - 14MB vs 20 MB.

  What is going on? How can I be sure that slot records are accurate?

  Thank you

  Jon

  Try to file > save as (Save NOT only) on the original file of 20 MB. (Never use any file > save if try to do a small file)

  What is the size of the file is saved like that?

  (I have never used Split Pages, don't know how it works).

• Why my adobe icons appear darker?

  Hi, I'm on a mac and my afp is up-to-date.

  Then when I go into the preferences system AFP icon appears darker as normal and when I click to see if there are updates an AFP box icon on my dashboard darker than usual? Is something wrong with that?

  Thank you for your help

  See response to Chris Campbellwhy the new logoes of the AIR and Flash Player runtime are very dark theme?

• Animated video appears darker on the Mac computer screens?

  If this has been driving me crazy. No indication on it will be great!

  I made a video of animation on a desktop Windows 8. My screen is actually a model TV Sceptre that I converted to a monitor. The brightness of the screen is placed high, but it is not the highest. When I visited my animation I use these parameters, specified by my employer. In the Format Options I put it as a MPEG 4 video at the highest quality.

  

  When I look at the video rendering on my computer, it seems, a bit on the side more dark but clear and contrasting, like I want to. When I need to show my employer video, I have to upload it to a video hosting site. For larger files my animation upload can take ten minutes to download, if she can manage the large size. Often I compress the video of 60% of its size and then download the .mp4 (rather than as the original .mov) video on the hosting site. But when my employer he looks on his Mac, the video is significantly lower and more muddy.

  To give you an idea of what looks like the animation, here is a sample

  

  Here is what I think continues to be:

  -Mac changes the color quality of videos, similar to the impression of an RGB image file that should really be a CMYK image

  -When I compress video colors become dimmer

  -The large amount of black in the video makes all drive

  -My TV monitor not expensive watch way too bright colors

  There are other reasons for this? Is there a RAM Preview or the color adjustment I need to set in After Effects for this problem? I'd like some answers ASAP since this project is very close to finish and it is literally the only thing I have left to work on it. Thank you!

  There are other reasons for this?

  Yes.

  When I made my animation I use these settings (picture here)

  You get what you ask - you use H.264 inherited from Apple, which is riddled with bugs, been did not update as ever and mess with the Gamma. Use native H.264 encoder AE via Adobe Media Encoder. In addition, you have reading to do on color management, how CoDecs use different ranges of Gamma and color and how the Gamma is different for Mac and Windows PC. This is all basic stuff that you can find a lot of info on the web.

  Mylenium