Why my router takes to always respond?

Similar Questions

• Why is-expose-animation-duration always set to 0 after I restarted my iMac?

  Why is-expose-animation-duration always set to 0 after I restarted my iMac?

  I always have to open the Terminal and run this command, back to normal.

  defaults delete com.apple.dock expose-animation-duration; Killall Dock

  Could possibly have installed something that is setting this value to login? It is not a 'necessary' preference, so I guess something is added.

• I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  I use 4 windows with multiple tabs, but I 'don't know why one of them (window) always close when I restar computer

  Hello, by default the firefox session restore feature only allows you to save last 3 windows open. to change this, type on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named browser.sessionstore.max_windows_undo. Double-click it and change its value to 4 (or more).

  http://KB.mozillazine.org/browser.sessionstore.max_windows_undo

• Why - what the apple mouse always unplug, then reconnect. No matter the State of the battery - new or otherwise.

  Why - what the apple mouse always unplug, then reconnect. No matter the State of the battery - new or otherwise.

  When did start?  I have the same problem for about 3 days.  I downloaded and applied update of OS X El Capitan 10.11.4 Combo, ran disk utility and ran disk first aid.  Have not had a problem since (touch wood because it is only since the mid morning today).

  

• Why I get "pages do not respond" in google chrome?

  Original title: completely fed up

  Why I get "pages do not respond" in google chrome?

  Hello

  You must check with their forums and Google Chrome support.

  Support for Google Chrome
  http://www.Google.com/support/chrome/

  Google Chrome forums
  http://www.Google.com/support/forum/p/chrome?hl=en&utm_source=HC&utm_medium=LeftNav&utm_campaign=chrome

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why oracle.exe takes 8 Virtual G; bytes, memroy target may not go beyond 5 G. How to minimize the virtual bytes perfmon

  Dear Experts,

  Please help me check why virtual bytes Perfmon takes more memory we allocated.

  OPERATING SYSTEM

  Windows Server 2003 R2 Enterprise Edition x 64 Edition Service Pack 2 (build) 3790

  ORACLE

  Oracle Database 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production

  PL/SQL release 11.1.0.6.0 - Production

  CORE 11.1.0.6.0 Production

  AMT for 64-bit Windows: Version 11.1.0.6.0 - Production

  NLSRTL Version 11.1.0.6.0 - Production

  Total RAM on the box is 8G

  Swap file

  Windows virtual memory equal to C, D, E, F discs is set to M 12273 and allocated now is 11262M

  LPENABLED is not defined

  SQL > show parameter pga_

  pga_aggregate_target 0

  SQL > show sga

  Total System Global Area 5344731136 bytes

  Bytes of size 2114736 fixed

  4630514512 variable size bytes

  671088640 of database buffers bytes

  Redo buffers 41013248 bytes

  SQL > see the memory settings

  hi_shared_memory_address 0

  memory_max_target 5G

  5G memory_target

  shared_memory_address 0

  SQL > show sga parameter

  lock_sga FALSE

  PRE_PAGE_SGA FALSE

  SGA_MAX_SIZE 5G

  SGA_TARGET 0

  Question:

  Why oracle.exe takes 8 Virtual G; bytes, memroy target may not go beyond 5 G. How to minimize the virtual bytes perfmon

  Thank you for your time and help.

  When you talk about Oracle.exe you seem not to take into account

  -L'executable memory will too

  -Oracle is a multithreaded Windows process, so memory consumption goes also to the different client that are connected to the database session.

  This means, you consume approximately 3G of memory beyond the LMS, and it is quite reasonable.

  So if you want to make sure that oracle consumes less than 8G memory, you have two options

  -reduce the SGA

  You spend more than 50 percent of the memory of the SGA. Oracle has never recommended that

  You might be willing to v$ sga_target_advisor allows you to see the impact of this change.

  You may also set your SQL queries

  -the second option you have is to stop Oracle.

  For sure it will use less than 8G in this solution.

  ---------------

  Sybrand Bakker

  Senior Oracle DBA

• Why can they take default permanent tablespace offline?

  We cannot take the tablespace temporary default offline, as well as of the SYSTEM, UNDOTBS1.
  so, I wonder why we take offline the permanent tablespace default as USERS?
  What happens if there is only a single tablespace 'USERS' in my database?

  PhoenixBai wrote:
  >
  Why do you have to be obsessed to take tablespaces offline?
  >
  not me obsessed to this topic. OCP tends to make a fuss out of it, so I have no choice, but to play the game.

  back to the point, the original question is:

  Your Oracle 10g database has 6 tablespaces in which:
  -TEMP is the default temporary tablespace
  - UNDOTBS1 is the default undo tablespace
  - USERS is the default permanent tablespace
  In this database, which three tablespaces can  be made offline? (Choose three.)
  
  1. USERS
  2. TEMP
  3. UNDOTBS1
  4. SYSTEM
  5. SYSAUX
  6. PROD
  

  responses, are without a doubt, 1,5,6. and I have no problem seen the SYSTEM may not be in offline mode.
  but, do not understand why TEMP and UNDOTBS1 isn't in offline mode while USERS can?
  for me, TEMP & UNDOTBS1 are to serve the manipulation on the data that is contained in the USERS (or PROD) tablespaces in this case.
  Thus, when data are not available, what is the point to keep TEMP & UNDOTBS1?

  Another possibility is: we are allowed to disconnect USERS tablespace, because currently we have an another PROD tablespace to store data?

  want you or anyone can help explain a little.
  I just want one another reasonable explanation that oracle doc said.

  Phonexbai,

  Please see,

  SQL> l
    1  select * from database_properties
    2* where property_name like '%DEFAULT%'
  SQL> /
  
  PROPERTY_NAME                                      PROPERTY_VALUE                                     DESCRIPTION
  -------------------------------------------------- -------------------------------------------------- ----------------------------------------------
  DEFAULT_TEMP_TABLESPACE                            TEMP                                               Name of default temporary tablespace
  DEFAULT_PERMANENT_TABLESPACE                       USERS                                              Name of default permanent tablespace
  DEFAULT_EDITION                                    ORA$BASE                                           Name of the database default edition
  DEFAULT_TBS_TYPE                                   SMALLFILE                                          Default tablespace type
  
  SQL> select * from V$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> archive log list
  Database log mode              No Archive Mode
  Automatic archival             Disabled
  Archive destination            USE_DB_RECOVERY_FILE_DEST
  Oldest online log sequence     71
  Current log sequence           73
  SQL> alter tablespace users offline ;
  
  Tablespace altered.
  
  SQL> alter tablespace users online;
  
  Tablespace altered.
  

  For the first thing, the declaration this tablespace users may be taken offline is indeed correct . Now the System and Sysaux are containing the data dictionary of the database and without whom, there is no point that this database can work. This is why its mandatory for them to be online and if off line by crushing or something, the recovery of them must also occur in the phase (Mount) offline.

  The Undo tablespace is required to service the mechanism of reading-consistansy of the database. If quoted to be mandatory (i.e. your AUM), it cannot be taken offline and being crushed, his recovery would be as necessary a restoration in offline mode. The Temp tablespace is a special tablespace (he was't it always in all previous versions) for the database and if it's a must for the datbase for read-only and do something that will exceed PGA. So it cannot be disconnected as well.

  Now, I'm sure you mean you know all this, what about users being able to get offline, right? Well, the answer is quite simple. Everything simply because you establish a default tablespace for the user be available as their default tablespace (further a quota to spread on it), it does not change any property of this tablespace. Its the tablespace, unlikely normal Temp, cancel and so on. He did justto do that people do not, by mistake, make objects in the System tablespace. A tablespace of default tablespace of the user database for the creation of objects, does not mean that all of a sudden, its now taking a special meaning. That is why its possible to redo this tablespace still transactions that apply to any other tablespace (by default) with the exception of the system those. I don't think to dig any deeper. There is no other explanation that it is possible for this behavior of the IMO.

  HTH
  Aman...

• I want to delete temporary internet files. Note that I did not clear the cache. It does not work! How can I delete temporary files? Why did you take this feature? VERY frustrating that you would do that!

  I'm looking for how to remove the temp int files and continue to flow upward with the nonsense of "empty the cache". This isn't what I searched. Clear the cache does NOT remove temporary files. Why do you want to take this feature here?

  Firefox uses or not delete temporary internet files which use IE and a few plugins. Firefox uses the Cache if you are using Firefox on Windows, Mac OSX, Linux or some other OS.

• Why the network location is always locked?

  I use locations 'House' and 'work '. I never put on automatic because the well, that simply never works.

  Why should I enter my password every time I want to change the location? I never lock back, let always unlocked. I have no restart or logout to make that happen, close preferences and open it again. It is locked again.

  Does not have this problem in Yosemite on this MBA; not I have it on Yosemite on my mini... What is the problem with El Capitan?

  In the security & privacy preferences window, please open settings, then click on the Advanced button and uncheck the box marked

  Need administrator password to access the lock settings

• Satellite A500 - 01 X takes to always at startup and does not

  I got my Satellite A500 - 01 X for about 2 weeks. It was working fine and then suddenly it takes forever to start and then almost all the programs when opening start "not responding". This includes Internet Explorer, and Microsoft Office 2007. I ran a check of the system, but also a virus scan and all come back with no problems. Any thoughts?

  Hello

  Have you tried to reset to factory settings (F8)? You have installed any programs recently?

• Why is my iPhone 4S always connect to Internet without wifi or data plan

  To save money I had my phone company (a Canadian one called SaskTel) take my iPhone from data/text/speech just talk about text. As almost a month ago and despite checking with them twice and said them it is common; y tali/text only and that is all I pay supposedly for, I can always connect to the Internet anywhere. Even when my wifi is not at hand or there is no recognized the WiFi or even someone unlocked open wifi, I can always get an Internet connection, and the phone says 3G. I was in the middle of nowhere and it is always to get an Internet connection and downloading podcasts streaming away from radio stations.

  Who gave am I using? Who provides this connection? Someone said it might be Apple and I'll eventually get a bill for him. SaskTel swore twice it wasn't them and I even let him tinker with the phone a bit but it's still talk/text according to them but still get an Internet connection, but not them.

  I would like to ID how he done this before that someone sends me a Bill sky high from nowhere.

  tangcameo wrote:

  To save money I had my phone company (a Canadian one called SaskTel) take my iPhone from data/text/speech just talk about text. As almost a month ago and despite checking with them twice and said them it is common; y tali/text only and that is all I pay supposedly for, I can always connect to the Internet anywhere. Even when my wifi is not at hand or there is no recognized the WiFi or even someone unlocked open wifi, I can always get an Internet connection, and the phone says 3G. I was in the middle of nowhere and it is always to get an Internet connection and downloading podcasts streaming away from radio stations.

  Who gave am I using? Who provides this connection? Someone said it might be Apple and I'll eventually get a bill for him. SaskTel swore twice it wasn't them and I even let him tinker with the phone a bit but it's still talk/text according to them but still get an Internet connection, but not them.

  I would like to ID how he done this before that someone sends me a Bill sky high from nowhere.

  Sorry, apple has nothing to do with cellular data.

  In order to use a cell iphone data are needed, unless you use it as an ipod and then it is not necessary.

  If your problem is with your phone carrier and not Apple.

• Why my SHOPPING list is always empty?

  I use the latest cCleaner, but it is not checked in the 2nd section down, Windows Explorer, run (in Start Menu). Why is the list always execute vacuum? Is this because my pc now has a huge current pleasant end and one of the things that I always need to click end now on explorer.exe?

  I put things like:

  Msconfig

  Rundll32.exe keymgr.dll, KRShowKeyMgr

  Regedit.exe

  and they are all gone after the next restart or whenever I look at new days later and the list is empty. So is something else by deleting them or is my END NOW on explorer.exe removing the list?

  Hello

  If it is empty you can get it back.

  Get rid of this registry cleaner, they set little and most are snake oil.

  CCleaner should not necessary be run at startup, it is run on demand
  here (I start it manually).

  You need to run the itellipoint if you use a Kensington mouse?

  Remove anything boot that you do not use.

  RUN - MSCONFIG
  Uncheck the box for start up unused programs. Also, you can experiment.

  I hope this helps.

• Why my router Linksys changed the password?

  I have a WRT610N router.  Earlier today, I had to stop the power on everything.  When I brought it up, it seems that he has changed the SSID that it broadcasts to the 2.6 version and the 5 GHz band.

  Why he did it?

  Most likely, you accidentally pressed the "Wi - Fi Protected Setup" button on the front of the router.

• Why Windows 7 takes my whole 30 GB OCZ Vertex SSD?

  I just installed Windows 7 on my 30 GB SSD and it said '1.08 GB free of 29.7 Go' I have not yet installed other programs... is Windows 7 64 - bit is supposed to be this big?

  Thank you

  The figure of 30 GB, is that GB or GiB, before or after format? And don't forget the use of space pagefile.sys and hyberfil.sys. Clean your temp folder.

  "Are there other background programs that might be too much space?" - each program that you install on your system drive takes place, but I guess you know who. :)

  After installing everything I need, disabling hybernation and like always putting the pagefile on a separate HARD drive, my Win7 x 64 resumes 12.3 GB.

• Why Win 7 takes hours to update?

  I just reinstalled Win 7 on my computer after that it totally collapsed for some unknown reason, but after installation and activation of Windows it still tries to find updates and so far it has worked for several hours.

  Is there a problem with Win Update ' cos I've never known that it takes so long to put aside since then, he has tried to install Win 10 on my machine, but I won't be using Win 10.

  If anyone can answer my question about why Win update taking so long?

  All I can say is to ensure that you have the latest Net framework installed manually 4.6.1
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=49982

  And the most recent client update
  https://support.Microsoft.com/en-us/KB/3138612