Why my windows are not connected to my Skype?

Similar Questions

• Cannot install windows XP it said hard drives are not connected & windows can not find the hard drives

  I got an asus computer notebook windows vista, upgrade from vista to windows 7, now I'm not able to do a clean install of windows xp, when I try to install XP, it says that hard drives are not connected & windows cannot find not the hard drives, so once again installed windows 7, is there a way to overcome this problem Why do I get the message windows xp does not detect hard drives? I even formatted the hard drive & tried to install Xp, but still, I get the same message.

  The answers will be appreciated...

  Thank you

  Because the Windows XP installation CD does not have the necessary disk controller drivers.  You will need a floppy drive to provide the drivers of controller for the installation program, or you will need to burn a CD of Windows XP with the controller drivers slipstreamed into the installation.  A CD of Windows XP with SP2 included may have the necessary drivers.

  John

• Windows 7 PCs are not connected to the closest access point

  Windows 7 PCs are not connected to the nearest access point.  Any ideas?

  For example:

  We have AP 1 and 2 of the AP for exaple.  They have the same SSID.  AP 2 is further with a bad signal.  AP 1 is closest with an excellent signal.  Why my laptop does not connect to the AP 1?

  You MUST use the same SSID.  I think that you misread my post.

  And Yes, a channel problem is that what I have proposed.  You can try to configure access points using the 3 discrete channels (1, 6 and 11) to minimize any overlapping units to the same channel coverage.
  At least this is the traditional way, we do it, although the automatic selection increases common and 11n 40 Mhz channels (if defined in this way) are also in.

• Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

  Wat (windows activation technologies)... I have windows 7 rtm... when I install this update, my windows are not authentic... why?

  Here is a possible explanation:

  Windows 7 displays "Windows is not genuine" with the code 0x80070005 error
  http://support.Microsoft.com/kb/2008385 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why windows does not connect to the Group Policy client?

  I am currently using a dell inspiron with windows 7 Edition 7720 Home premium and recently a message started to appear above my taskbar saying

  "Unable to connect to a windows service.
  Windows could not connect to the Group Policy Client service. The problem prevents standard users to log on to the system.
  As long as administrator, you can go through the system event log to see why the service failed"
  Anyone know why this is happening and how to fix it?

  The resolution is quite easy. Ignore all these tech geeks here and on other sites that just want to show how they can play with the registers - a very dangerous game.  Go to search, type in cmd, open cmd as administrator.  Type exactly this (with the indicated spaces): netsh winsock repair, and then press ENTER. You need to restart (NOT close and turn on) your computer. Bingo! Unfortunately, this condition can re - occur from time to time, as if you start your computer before you turn on your internet connection and establish a good connection.  Don't worry the fix takes about 3 to 5 minutes depending on your speed of restart computer.

• Windows 8 pro applications say that they are not connected to the internet

  I just installed Windows 8 pro and after installing, everything worked well. However, now all applications say that they are not connected to the internet.

  Shop Windows says "you're PC is not connected to the internet," However, when I go to the Office the internet works fine.
  How can I fix?
  I tried to make a new account and check my internet options, but nothing seems to work.

  After much more research online, I was able to find the problem for my computer. Before moving to windows 8, I had AVG internet security on windows 7, and apparently that's what was blocking the applications to connect to the internet.

  So if you have some type of antivirus or internet security installed, try to remove them to see if that makes a difference.

• You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable.

  Unplugged network cable?

  Recently I get this message then on the line. You are not connected to the internet! You want to work offline or try again? There is also a box with a red x and the message reads unplugged network cable. It is very aggravating. Can someone tell me how to solve this problem? It might have something to do with my firewall? I recently downloaded mozzilla firefox if I could play words with friends, because IE would not work on the game.

  Hi LouisteanGriffin,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  Windows wireless and wired network connection problems

  For reference:

  How to reset the Protocol Internet (TCP/IP)

• Windows could not connect to the Group Policy client service

  I get the error message after restarting my laptop with Vista Home:

  Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

  I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

  I tried this:

  1.
  

  http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

  with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

  My laptop have orginal Vista and I have no bootable CD.
  

  2.

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

  result:

  netsh

  Netch > winsock reset

  Elevation of the requiries the requested operation.

  Help, please.
  

  Hi SSergo,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Encarta Dictionary works do not mistake: this service could not be searched because you are not connected to the Internet. Connect, and then try again

  Original title: Encarta Dictionary (not searched)

  Encarta dictionary does not. I get the message "this service could not be searched because you are not connected to the Internet.  Connect, and then try again. "However, I am connected to the Internet.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Error: "Setup cannot continue because you are not connected to the internet or the server is unavailable" with install LifeCam

  Original title: Microsoft LifeCam VX-3000 installation problems

  On the insertion of the CD, I get an error message that says:

  "Setup cannot continue because you are not connected to the internet or the server is unavailable.  Connect you to the internet and run the SETUP again.  During the installation process, accept all safety messages or a firewall. »

  I am connected to the internet and have tried the setup.exe and allowing the CD auto load with the same error several times running.    (Windows xp / laptop Toshiba - all system bus met...)     Thanks for any help!

  Hi kb11a,

  The Knowledge Base article has many resolutions for this issue. Follow the steps. I hope that one of them will fix the problem of the installation.

  Resolve the error "Setup cannot continue" when you install the LifeCam software
  http://support.Microsoft.com/kb/973297

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 not connected the system event notification.

  Hello

  I have Windows 7 operating system on my laptop wireless. (it's 32 bit), lately, when I start the computer, it is very very slow and then I get this message that says: Windows 7 has no connection to the system event notification.

  I did system restore, but it did not work. I ran Fixit program but nothing happened. So what is the cause and how to fix it?

  I read a few solutions on the internet, but when I tried to follow them, I can't find certain things on my computer, that are mentioned in the instructions, so I can not complete the step by step instructions.

  Please respond to your first it will be appreciated.

  Thank you.

  Night1

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  I understand that you get the message 'Windows 7 did not link with the event notification system. Let me ask you a few questions to better understand.

  1. When exactly do you get this error?
  2. This error occurs on a specific user account?
  3. You did a significant hardware or software change before this problem?
  4. What security software do you use?

  This conflict may have been caused by some programs launched during the startup process of Windows 7 with the services.

  I suggest you to try the following suggestions and check.

  Method 1: The value Service of event system Automatic Notification.

  To so proceed as follows:

  one), click Start or press the Windows key + R

  (b) type Services.msc in the search box and press enter.

  (c) right click on System Event Notification Service.

  (d) click on Properties , change the startup type to Automatic.

  If the computer stops during execution of the above steps, you can try to put the computer in clean boot mode and check.

  Method 2: Check safe mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If the computer starts quickly in safe mode, check in a clean boot

  Method 3: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: See 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 4: Unexpectedly slow start in Windows 7 or in Windows Server 2008 R2

  http://support.Microsoft.com/kb/977419

  You can also check the suggestions provided by Nithyananda J replied on February 13, 2011

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-could-not-connect-to-the-system-event/ce621cf9-577a-407E-86a1-62bbfc3d5129

  After back if still the problem persists. We will be happy to help you further.

  Thank you

• Windows could not connect to the user profile Service

  I couldn't use my own laptop for six months. Whenever I try to connect to my profile (profile/ONLY the Administrator profile), it gives me this:

  "Unable to connect to a windows service. Windows could not connect to the service user profile service. This problem prevents standard users to log on to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  The error itself didn't come for two days now, but the problems still present themselves:

  -My personal profile seems gone.

  -Impossible to connect to the internet (my connection is fine, I use another laptop on the network even in the same House now)

  -Return to default settings

  -Slower than usual start.

  I tried the solutions that have been everywhere online and none of them worked for me. Help, please? I'd like to have my laptop back...

  Additional info: Im using a laptop Windows 7 Dell Inspiron (1564) and there is no point of restoration since before the error. I tried the Regedit fix and it didn't work and it doesn't let me delete the profile owner / administrator as to make a new one.

  To correct this corruption of user profiles, consult a guide to recovery of lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, then post them here [i.e. don't post in the thread linked as it is already very long]; I'll keep an eye on this issue.

• Sync of DM of blackBerry Smartphones 'are not connected to the internet.

  I have the BB Curve 8330. I HAD DM 4.3. I bought the new computer, with Windows 7, and I downloaded the latest version of the DM. Now the message says that you are not connected to the internet. I did a lot of research today, and I do not understand much about the proxies. The only thing I see is that I listed port 80, but I see no other. I don't know if I need these two ports, and if I do, I do not understand how to find the address and add the other port. I know as little about proxies that I don't even know if I am this wording of the questions correctly! Sorry! I hope someone can help without a really complicated solution!

  Sorry that I was not back to meet and finalize this - had some seedlings to make! Finally got between this rain! I digress... Well had a few other issues with my new computer, HP have called and got help from them - couldn't even send and receive emails more. I'm embarrassed to say that the problem with my timing and electronic mail was Norton Antivirus! I had to uninstall it - that you can't even do it right on your computer, you must go to their website and get a special tool to uninstall it and when it was all finished, my e-mail has started working again and so did my syncing. I can't believe that a program like this can cause so much havoc. I know there are a lot of threads that say to deal with your antivirus, but there was a trial version on my new computer that I had not subscribed too, and even the trial were exhausted. I had checked all my settings on anti-virus, but it didn't matter. I had to uninstall all.  Thanks for your help anyway. You always learn a lot that you go when you run into problems. My own Kaspersky program is now installed, my BB is in sync, work e-mail, and seeding is finished - everything is good!

• Said computers that windows could not connect to the system event notification service

  Said computers that windows could not connect to the system event notification service. Does not connect as an administrator.

  I played the system restore. Solved the problem, but why did it happen?